SG1000 not working after upgrade it no longer booting
-
Welcome to pfSense …
chflags: /var/empty: Read-only file system
rm: /var/run/dhclient.leases: Read-only file system
rm: /var/run/ld-elf.so.hints: Read-only file system
rm: /var/run/ppp: Read-only file system
rm: /var/run/wpa_supplicant: Read-only file system
../etc/pfSense-rc: mount_devfs: not found
cp: utmp: Read-only file system
.done.
cap_mkdb: /etc/login.conf.db: Read-only file system
/usr/local/libexec/pfSense-upgrade: cannot create /var/run/pfSense-upgrade.pid: Read-only file system
/usr/local/libexec/pfSense-upgrade: cannot create /usr/local/etc/pkg.conf: Read-only file system
/usr/local/libexec/pfSense-upgrade: cannot create /usr/local/etc/pkg.conf: Read-only file system
Shared object "libpkg.so.4" not found, required by "pkg"
Shared object "libpkg.so.4" not found, required by "pkg"
tee: /cf/conf/upgrade_log.txt: Read-only file system
ERROR: It was not possible to identify which pfSense kernel is installed
rm: /tmp/pfSense-upgrade.lock: Read-only file system
cp: /etc/ssl/openssl.cnf: Read-only file system
ln: /usr/local/openssl/openssl.cnf: Read-only file system
/etc/pfSense-rc: cannot create /tmp/php_errors.txt: Read-only file system
random: unblocking device.
Mon Jun 26 02:34:41 2017 (144): Fatal Error Unable to create lock file: Bad file descriptor (9)
fcgicli: Could not connect to server(/var/run/php-fpm.socket).
nice: /usr/local/sbin/check_reload_status: Input/output error
Launching the init system...rm: /cf/conf/backup/backup.cache: Read-only file system
touch: /var/run/booting: Read-only file system
Starting CRON... done.
fcgicli: Could not connect to server(/var/run/php-fpm.socket).
/usr/local/libexec/pfSense-upgrade: cannot create /var/run/pfSense-upgrade.pid: Read-only file system
/usr/local/libexec/pfSense-upgrade: cannot create /usr/local/etc/pkg.conf: Read-only file system
/usr/local/libexec/pfSense-upgrade: cannot create /usr/local/etc/pkg.conf: Read-only file system
Shared object "libpkg.so.4" not found, required by "pkg"
Shared object "libpkg.so.4" not found, required by "pkg"
tee: /cf/conf/upgrade_log.txt: Read-only file system
ERROR: It was not possible to identify which pfSense kernel is installed
rm: /tmp/pfSense-upgrade.lock: Read-only file system
pfSense arm
Bootup complete -
Sounds you like to boot into single user mode and run fsck.
If you go into the official support portal there are instructions in there for doing that. -
Can you posted or pm me the link i cant find it
-
-
I too was having that problem until I finally figured out to make damn sure that I reboot the unit first and apply the upgrades immediately after completing the reboot.