Pfsense Openvpn server and client connected but not working
-
Dear All,
i have one small problem, need someone advise. i am configured open vpn server at one end it have only wan interface and in other side i am installed pfsense client has wan and lan interface both side are configured. Open vpn status showing connected but i am not able ping or remote desktop i cannot able to access. please help me to resolve the problem.
Note: firewall rule also added stil problem was there.
Something i need to do with server pfsense nat setting. i dont knw to fix it.regards
Kiruba
![Open server client A.JPG](/public/imported_attachments/1/Open server client A.JPG)
![Open server client A.JPG_thumb](/public/imported_attachments/1/Open server client A.JPG_thumb)
![Status Connected.JPG](/public/imported_attachments/1/Status Connected.JPG)
![Status Connected.JPG_thumb](/public/imported_attachments/1/Status Connected.JPG_thumb)
![Client B.JPG](/public/imported_attachments/1/Client B.JPG)
![Client B.JPG_thumb](/public/imported_attachments/1/Client B.JPG_thumb)
![Client B VPN Status.JPG](/public/imported_attachments/1/Client B VPN Status.JPG)
![Client B VPN Status.JPG_thumb](/public/imported_attachments/1/Client B VPN Status.JPG_thumb) -
any advise please
-
It's hard to follow, what you've exactly set up.
Do have one server and two clients or only one client or two servers with multiple clients??
Open server client A.JPG shown a client connected to port 1194, obviously to a remote access server.
Status Connected.JPG shows a site-to-site server listening on port 1195.
:oPlease tell what you've exactly configured in OpenVPN and post your settings.
-
Thank you so much for your reply.
my requirement explained in my network topoloqy.
![Untitled Diagram.jpg](/public/imported_attachments/1/Untitled Diagram.jpg)
![Untitled Diagram.jpg_thumb](/public/imported_attachments/1/Untitled Diagram.jpg_thumb) -
Please see my configure file. Please help me.
Thanks
Kiruba
![Server Conf1.JPG](/public/imported_attachments/1/Server Conf1.JPG)
![Server Conf1.JPG_thumb](/public/imported_attachments/1/Server Conf1.JPG_thumb)
![Server Conf2.JPG](/public/imported_attachments/1/Server Conf2.JPG)
![Server Conf2.JPG_thumb](/public/imported_attachments/1/Server Conf2.JPG_thumb)
![client conf1.JPG](/public/imported_attachments/1/client conf1.JPG)
![client conf1.JPG_thumb](/public/imported_attachments/1/client conf1.JPG_thumb)
![client conf2.JPG](/public/imported_attachments/1/client conf2.JPG)
![client conf2.JPG_thumb](/public/imported_attachments/1/client conf2.JPG_thumb) -
So the site A pfSense has only WAN interface and you try to access other devices on the WAN network?
Please tell if you're running multiple vpn instances (client or server) on one site. That's essential.
-
yes..
In both location one server and client instance running. you're right One file name screen shot: 192.168.9.254 and in another 192.168.2.250. my previous diagram i am mentioned.
Thanks
kiruba
-
What is the IP address you are trying to connect from?
What is the IP address you are trying to connect to?
Please try not to use terms like "I cannot ping desktop servers" Nobody knows what that is.
-
sorry for my bad english. i want to connect from 87.233.50.200(site B Client) to 82.236.52.82(Site A server)
-
No. The real, inside IP addresses of the hosts you are pinging from and to. Not the WAN addresses. Once the tunnel is up those don't matter any more.
-
Dear,
Server A side
Lan interface not configured:
Only WAN Address: 192.168.2.250
Static IP Address : 82.236.52.82
Vpn tunnel: 10.18.18.0 /24
Clint B side:PFsene or LAN Interface IP: 192.168.9.254
WAN Address: 82.233.50.200
Static IP Address: 82.533.50.200.i am ping from 192.168.2.*** to 192.168.9.** not able to do
-
I am asking for a specific IP address on each side and you still give ***.
What is the default gateway set on host 192.168.2.*** ???
-
Default gateway on 192.168.2.250 is 192.168.1.10
Deafult gateway set on 192.168.9. 254 is 87.**.2*.201. -
No. The default gateways set on the two end hosts that are trying to communicate over the VPN.
Please provide their exact IP addresses and their set default gateways.
-
Dear Derelict,
i am not understand can you explain me deeply. please help me
Regards
kiruba
-
viragomann and Derelict any suggestion please
-
i am ping from 192.168.2.*** to 192.168.9.** not able to do
What, exact host is 192.168.2.***?
What, exactly, is the default gateway configured on that host?
What, exact host is 192.168.9.**?
What, exactly, is the default gateway configured on that host?
-
i am ping from 192.168.2.*** to 192.168.9.** not able to do
What, exact host is 192.168.2.***?
What, exactly, is the default gateway configured on that host?
What, exact host is 192.168.9.**?
What, exactly, is the default gateway configured on that host?
Screen shot was attached…
![GW Server A.JPG](/public/imported_attachments/1/GW Server A.JPG)
![GW Server A.JPG_thumb](/public/imported_attachments/1/GW Server A.JPG_thumb)
![Client GW.JPG](/public/imported_attachments/1/Client GW.JPG)
![Client GW.JPG_thumb](/public/imported_attachments/1/Client GW.JPG_thumb)
![client lan gw.JPG](/public/imported_attachments/1/client lan gw.JPG)
![client lan gw.JPG_thumb](/public/imported_attachments/1/client lan gw.JPG_thumb) -
No. The hosts you are pinging to/from on those networks.
-
No. The hosts you are pinging to/from on those networks.
No i am not able to ping… only status showing connected...
But in the Diagonists states it was showing multiple:mulitple.
Regards
kiruba