Placa WiFi Atheros não reconhecida no PfSense
-
Pessoal, tenho um PfSense box com 8 portas Gigabit + 4 portas fibra SFP.
Numa das conexões mini pcie que tenho na minha placa mãe eu conectei uma placa WIFI Atheros Ar5B95 mas esta placa não é reconhecida de forma alguma pelo PfSense.
Vejam que não aparece a interface ath nos logs do FreeBSD:
dmesg:
Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p19 #1 76a12c4e6(RELENG_2_3_4): Fri Jul 14 15:02:35 CDT 2017 root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i7-4790T CPU @ 2.70GHz (2693.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x7ffafbff <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand>AMD Features=0x2c100800 <syscall,nx,page1gb,rdtscp,lm>AMD Features2=0x21 <lahf,abm>Structured Extended Features=0x2fbb <fsgsbase,tscadj,bmi1,hle,avx2,smep,bmi2,erms,invpcid,rtm,nfpusg>XSAVE Features=0x1 <xsaveopt>VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4025741312 (3839 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <alaska a="" m="" i="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 random: <software, yarrow="">initialized ioapic0 <version 2.0="">irqs 0-23 on motherboard wlan: mac acl policy registered netmap: loaded module kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <alaska a="" m="" i="">on motherboard acpi0: Power Button (fixed) cpu0: <acpi cpu="">on acpi0 cpu1: <acpi cpu="">on acpi0 cpu2: <acpi cpu="">on acpi0 cpu3: <acpi cpu="">on acpi0 cpu4: <acpi cpu="">on acpi0 cpu5: <acpi cpu="">on acpi0 cpu6: <acpi cpu="">on acpi0 cpu7: <acpi cpu="">on acpi0 hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pcib1: <acpi pci-pci="" bridge="">irq 16 at device 1.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe060-0xe07f mem 0xf7580000-0xf75fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 00:90:27:e1:2d:93 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe040-0xe05f mem 0xf7500000-0xf757ffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 00:90:27:e1:2d:94 igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 igb1: Bound queue 4 to cpu 4 igb1: Bound queue 5 to cpu 5 igb1: Bound queue 6 to cpu 6 igb1: Bound queue 7 to cpu 7 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe020-0xe03f mem 0xf7480000-0xf74fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 igb2: Using MSIX interrupts with 9 vectors igb2: Ethernet address: 00:90:27:e1:2d:95 igb2: Bound queue 0 to cpu 0 igb2: Bound queue 1 to cpu 1 igb2: Bound queue 2 to cpu 2 igb2: Bound queue 3 to cpu 3 igb2: Bound queue 4 to cpu 4 igb2: Bound queue 5 to cpu 5 igb2: Bound queue 6 to cpu 6 igb2: Bound queue 7 to cpu 7 igb2: netmap queues/slots: TX 8/1024, RX 8/1024 igb3: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe000-0xe01f mem 0xf7400000-0xf747ffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 igb3: Using MSIX interrupts with 9 vectors igb3: Ethernet address: 00:90:27:e1:2d:96 igb3: Bound queue 0 to cpu 0 igb3: Bound queue 1 to cpu 1 igb3: Bound queue 2 to cpu 2 igb3: Bound queue 3 to cpu 3 igb3: Bound queue 4 to cpu 4 igb3: Bound queue 5 to cpu 5 igb3: Bound queue 6 to cpu 6 igb3: Bound queue 7 to cpu 7 igb3: netmap queues/slots: TX 8/1024, RX 8/1024 vgapci0: <vga-compatible display="">port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <haswell desktop="" gt2="">on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device hdac0: <intel haswell="" hda="" controller="">mem 0xf7f10000-0xf7f13fff irq 16 at device 3.0 on pci0 xhci0: <intel lynx="" point="" usb="" 3.0="" controller="">mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms="">at device 22.0 (no driver attached) ehci0: <intel lynx="" point="" usb="" 2.0="" controller="" usb-b="">mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 em0: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xd000-0xd01f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 16 at device 0.0 on pci2 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 00:90:28:01:2e:f1 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0 pci3: <acpi pci="" bus="">on pcib3 em1: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xc000-0xc01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 17 at device 0.0 on pci3 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 00:90:28:01:2e:f2 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0 pci4: <acpi pci="" bus="">on pcib4 em2: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xb000-0xb01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 18 at device 0.0 on pci4 em2: Using MSIX interrupts with 3 vectors em2: Ethernet address: 00:90:28:01:2e:f3 em2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0 pci5: <acpi pci="" bus="">on pcib5 em3: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xa000-0xa01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 19 at device 0.0 on pci5 em3: Using MSIX interrupts with 3 vectors em3: Ethernet address: 00:90:28:01:2e:f4 em3: netmap queues/slots: TX 1/1024, RX 1/1024 pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0 pci6: <acpi pci="" bus="">on pcib6 em4: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x9000-0x901f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 16 at device 0.0 on pci6 em4: Using MSIX interrupts with 3 vectors em4: Ethernet address: 00:90:28:01:2e:f5 em4: netmap queues/slots: TX 1/1024, RX 1/1024 pcib7: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0 pci7: <acpi pci="" bus="">on pcib7 em5: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x8000-0x801f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 17 at device 0.0 on pci7 em5: Using MSIX interrupts with 3 vectors em5: Ethernet address: 00:90:28:01:2e:f6 em5: netmap queues/slots: TX 1/1024, RX 1/1024 pcib8: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0 pci8: <acpi pci="" bus="">on pcib8 em6: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x7000-0x701f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 18 at device 0.0 on pci8 em6: Using MSIX interrupts with 3 vectors em6: Ethernet address: 00:90:28:01:2e:f7 em6: netmap queues/slots: TX 1/1024, RX 1/1024 pcib9: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0 pci9: <acpi pci="" bus="">on pcib9 em7: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x6000-0x601f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 19 at device 0.0 on pci9 em7: Using MSIX interrupts with 3 vectors em7: Ethernet address: 00:90:28:01:2e:f8 em7: netmap queues/slots: TX 1/1024, RX 1/1024 ehci1: <intel lynx="" point="" usb="" 2.0="" controller="" usb-a="">mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 ahci0: <intel lynx="" point="" ahci="" sata="" controller="">port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich1: <ahci channel="">at channel 1 on ahci0 ahciem0: <ahci enclosure="" management="" bridge="">on ahci0 acpi_button0: <power button="">on acpi0 acpi_tz0: <thermal zone="">on acpi0 acpi_tz1: <thermal zone="">on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range est0: <enhanced speedstep="" frequency="" control="">on cpu0 est1: <enhanced speedstep="" frequency="" control="">on cpu1 est2: <enhanced speedstep="" frequency="" control="">on cpu2 est3: <enhanced speedstep="" frequency="" control="">on cpu3 est4: <enhanced speedstep="" frequency="" control="">on cpu4 est5: <enhanced speedstep="" frequency="" control="">on cpu5 est6: <enhanced speedstep="" frequency="" control="">on cpu6 est7: <enhanced speedstep="" frequency="" control="">on cpu7 Timecounters tick every 1.000 msec hdacc0: <intel haswell="" hda="" codec="">at cad 0 on hdac0 hdaa0: <intel haswell="" audio="" function="" group="">at nid 1 on hdacc0 pcm0: <intel haswell="" (hdmi="" dp="" 8ch)="">at nid 3 on hdaa0 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <intel>at usbus2 uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ugen0.1: <0x8086> at usbus0 uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 21 ports with 21 removable, self powered ugen2.2: <vendor 0x8087="">at usbus2 uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x8000,="" class="" 0,="" rev="" 2.00="" 0.05,="" addr="">on usbus2 ugen1.2: <vendor 0x8087="">at usbus1 uhub4: <vendor 2="" 9="" 0x8087="" product="" 0x8008,="" class="" 0,="" rev="" 2.00="" 0.05,="" addr="">on usbus1 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <ahci sgpio="" enclosure="" 1.00="" 0001="">SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 ada0: <intel ssdsc2bw120h6="" rg20="">ACS-3 ATA SATA 3.x device ada0: Serial Number CVTR523204PX120AGN ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! Timecounter "TSC-low" frequency 1346911190 Hz quality 1000 Trying to mount root from ufs:/dev/ufsid/597c9240b1c6b067 [rw]... WARNING: / was not properly dismounted padlock0: No ACE support. aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm>on motherboard coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0 coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1 coretemp2: <cpu on-die="" thermal="" sensors="">on cpu2 coretemp3: <cpu on-die="" thermal="" sensors="">on cpu3 coretemp4: <cpu on-die="" thermal="" sensors="">on cpu4 coretemp5: <cpu on-die="" thermal="" sensors="">on cpu5 coretemp6: <cpu on-die="" thermal="" sensors="">on cpu6 coretemp7: <cpu on-die="" thermal="" sensors="">on cpu7 vlan0: changing name to 'em5_vlan5' vlan1: changing name to 'em5_vlan6' vlan2: changing name to 'em5_vlan7' vlan3: changing name to 'em5_vlan9' em5: link state changed to UP em5_vlan5: link state changed to UP em5_vlan6: link state changed to UP em5_vlan7: link state changed to UP em5_vlan9: link state changed to UP em0: link state changed to UP igb0: link state changed to UP bridge0: Ethernet address: 02:47:8c:95:a5:00 bridge0: link state changed to UP em5: promiscuous mode enabled em5_vlan7: promiscuous mode enabled em3: promiscuous mode enabled tun1: changing name to 'ovpns1' ovpns1: link state changed to UP pflog0: promiscuous mode enabled em1: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded em2: link state changed to UP em6: promiscuous mode enabled em6: link state changed to UP</cpu></cpu></cpu></cpu></cpu></cpu></cpu></cpu></aes-cbc,aes-xts,aes-gcm,aes-icm></intel></ahci></vendor></vendor></vendor></vendor></intel></intel></intel></intel></intel></intel></intel></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></at></keyboard></generic></system></thermal></thermal></power></ahci></ahci></intel></isa></pci-isa></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel></simple></intel></intel></haswell></vga-compatible></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></at></at></high></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></alaska></software></version></software,></alaska></xsaveopt></fsgsbase,tscadj,bmi1,hle,avx2,smep,bmi2,erms,invpcid,rtm,nfpusg></lahf,abm></syscall,nx,page1gb,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>pciconf -lv :
hostb0@pci0:0:0:0: class=0x060000 card=0x0c008086 chip=0x0c008086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '4th Gen Core Processor DRAM Controller' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x0c018086 chip=0x0c018086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller' class = bridge subclass = PCI-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x04128086 chip=0x04128086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:3:0: class=0x040300 card=0x0c0c8086 chip=0x0c0c8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller' class = multimedia subclass = HDA xhci0@pci0:0:20:0: class=0x0c0330 card=0x8c318086 chip=0x8c318086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB xHCI' class = serial bus subclass = USB none0@pci0:0:22:0: class=0x078000 card=0x8c3a8086 chip=0x8c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family MEI Controller' class = simple comms ehci0@pci0:0:26:0: class=0x0c0320 card=0x8c2d8086 chip=0x8c2d8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB pcib2@pci0:0:28:0: class=0x060400 card=0x8c108086 chip=0x8c108086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x8c128086 chip=0x8c128086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:2: class=0x060400 card=0x8c148086 chip=0x8c148086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib5@pci0:0:28:3: class=0x060400 card=0x8c168086 chip=0x8c168086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib6@pci0:0:28:4: class=0x060400 card=0x8c188086 chip=0x8c188086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib7@pci0:0:28:5: class=0x060400 card=0x8c1a8086 chip=0x8c1a8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib8@pci0:0:28:6: class=0x060400 card=0x8c1c8086 chip=0x8c1c8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib9@pci0:0:28:7: class=0x060400 card=0x8c1e8086 chip=0x8c1e8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x8c268086 chip=0x8c268086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB isab0@pci0:0:31:0: class=0x060100 card=0x8c4a8086 chip=0x8c4a8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'H87 Express LPC Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x8c028086 chip=0x8c028086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x8c228086 chip=0x8c228086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family SMBus Controller' class = serial bus subclass = SMBus igb0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb1@pci0:1:0:1: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb2@pci0:1:0:2: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb3@pci0:1:0:3: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet em0@pci0:2:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em1@pci0:3:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em2@pci0:4:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em3@pci0:5:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em4@pci0:6:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em5@pci0:7:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em6@pci0:8:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em7@pci0:9:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernetMeu /boot/loader.conf.local está assim:
kern.cam.boot_delay=10000 legal.intel_ipw.license_ack=1 legal.intel_wpi.license_ack=1 legal.intel_iwi.license_ack=1 if_ath_load="YES" if_ath_pci_load="YES" if_ath_hal_load="YES" hw.ath.debug="1" hw.ath.hal.debug="1"Alguma ideia de como fazer o FreeBSD enxergar esta placa, que até onde entendi é suportada pelo OS?
muito obrigado
-
Onde tu verificou que ela é suportada?
Não consta na lista de suportadas.
https://www.freebsd.org/releases/10.3R/hardware.html#wlan -
Onde tu verificou que ela é suportada?
Não consta na lista de suportadas.
https://www.freebsd.org/releases/10.3R/hardware.html#wlanA maioria das placas Atheros são suportadas segundo este link… veja:
[i386,pc98,amd64,sparc64] The ath(4) driver supports all Atheros Cardbus and PCI cards, except those that are based on the AR5005VL chipset.
Tks
-
Blz! ;D
-
Comprei uma placa nova Atheros Ar5bxb72 e o mesmo: não reconhecida.
Ou seja, não é a placa WiFi que está com defeito…
-
Comprei uma placa nova Atheros Ar5bxb72 e o mesmo: não reconhecida.
Ou seja, não é a placa WiFi que está com defeito…
No log do dmesg nem sinal da placa? Muito estranho.
Se tu puder, instala um freebsd 10.3 em uma outra máquina que tenha pci-e e testa essas placas.
-
No log do dmesg nem sinal da placa? Muito estranho.
Pois é. Nada.
Algo que também acho estranho é a ausencia do módulo if_ath no diretorio do /boot/kernel. Ele não deveria estar aqui ?
ls /boot/kernel:aesni.ko alpm.ko amdpm.ko amdsmb.ko amdtemp.ko coretemp.ko dummynet.ko fdescfs.ko glxsb.ko hwpmc.ko ichsmb.ko if_ic.ko if_ixgbe.ko if_stf.ko iic.ko iicbb.ko iicbus.ko iicsmb.ko intpm.ko ipdivert.ko ipfw.ko ipmi.ko ipmi_linux.ko ismt.ko kernel.gz linker.hints lpbb.ko ndis.ko nfsmb.ko nmdm.ko opensolaris.ko pcf.ko sfxge.ko smb.ko smbus.ko viapm.ko vmm.ko zfs.koQuando eu verifico quais estão carregados eu recebo:
kldstat:Id Refs Address Size Name 1 15 0xffffffff80200000 225f380 kernel 2 1 0xffffffff82611000 7577 aesni.ko 3 1 0xffffffff82619000 29eb coretemp.ko 4 1 0xffffffff8261c000 2a9bf ipfw.ko 5 1 0xffffffff82647000 d299 dummynet.koComo verifico se os modulos do chipset atheros foram corretamente carregados? Pq no /boot/loader.conf.local os comandos estão lá:
kern.cam.boot_delay=10000 legal.intel_ipw.license_ack=1 legal.intel_wpi.license_ack=1 legal.intel_iwi.license_ack=1 if_ath_load="YES" if_ath_pci_load="YES" if_ath_hal_load="YES" hw.ath.debug="1" hw.ath.hal.debug="1"
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.