PfSense OpenVPN clients routing

Gec · Oct 5, 2017, 12:08 PM

We've setup OpenVPN using pfSense 2.3.4

Local subnet is 192.168.3.0/24, VPN clients are 10.10.10.0/24

We also have another subnets 192.168.5.0/24 and 192.168.10.0/24 which is connected through pfSense IPSec as a Site-To-Site VPN.

OpenVPN clients are able to ping hosts on 192.168.3.0/24 subnet without any problems, but are unable to ping hosts on

192.168.5.0/24 and 192.168.10.0/24

pfSense itself is able to ping 192.168.3.0/24 clients from "Diagnostics > Ping" menu, but unable to do so from shell.

We need to enable OpenVPN clients to access hosts on 192.168.5.0./24 and 192.168.10.0/24 subnet.

Jackish · Oct 10, 2017, 1:00 PM

1. Your openvpn clients need routes to 192.168.5.0/24 and 192.168.10.0/24, this can be achieved in the webgui. If the clients use 10.10.10.1 (which I assume is the Openvpn gw) as default route this is not necessary.
2. Your hosts at 192.168.5.0/24 and 192.168.10.0/24 need to have a route back to 10.10.10.0/24.

Gec · Oct 11, 2017, 1:43 PM

Hi i use openvpn gui. Please write me exactly the commands and in which router to enter them or through scratch images show me in which menu exactly how to introduce you I beseech you