WAN ip keep on and off
-
2.4.2-RELEASE (amd64)
CPU usage: <8%
Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz
INTEL GB LANproblem:
Slow internet and even on & off on clientspfsense:
the interface of WAN keep flashing between real IP, n/a, 0.0.0.0
there're no problem on last few months
i did reboot all devices and called ISP to reboot
still the same problemLog:
Dec 6 14:18:02 php-fpm 77565 /rc.newwanip: ROUTING: setting default route to 158.176.170.1
Dec 6 14:18:02 php-fpm 77565 /rc.newwanip: rc.newwanip: on (IP address: 158.176..) (interface: WAN[wan]) (real interface: em0).
Dec 6 14:18:02 php-fpm 77565 /rc.newwanip: rc.newwanip: Info: starting on em0.
Dec 6 14:18:02 check_reload_status Starting packages
Dec 6 14:18:02 php-fpm 77565 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 158.176.. -> 158.176.. - Restarting packages.
Dec 6 14:18:01 check_reload_status Starting packages
Dec 6 14:18:01 php-fpm 58899 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> - Restarting packages.
Dec 6 14:18:01 check_reload_status Reloading filter
Dec 6 14:18:01 php-fpm 58899 /rc.newwanip: rc.newwanip called with empty interface.
Dec 6 14:18:01 php-fpm 58899 /rc.newwanip: rc.newwanip: on (IP address: ) (interface: []) (real interface: ovpns2).
Dec 6 14:18:01 php-fpm 58899 /rc.newwanip: rc.newwanip: Info: starting on ovpns2.
Dec 6 14:18:01 check_reload_status Restarting ipsec tunnels
Dec 6 14:18:01 php-fpm 90414 /rc.linkup: ROUTING: setting default route to 158.176.170.1
Dec 6 14:18:01 check_reload_status rc.newwanip starting em0
Dec 6 14:18:01 kernel em0: link state changed to UP
Dec 6 14:18:01 check_reload_status Linkup starting em0
Dec 6 14:18:00 kernel ovpns2: link state changed to DOWN
Dec 6 14:18:00 check_reload_status rc.newwanip starting ovpns2
Dec 6 14:18:00 php-fpm 77565 /rc.newwanip: Creating rrd update script
Dec 6 14:18:00 check_reload_status Reloading filter
Dec 6 14:18:00 kernel ovpns2: link state changed to UP
Dec 6 14:18:00 php-fpm 77565 OpenVPN PID written: 48855
Dec 6 14:18:00 php-fpm 77565 OpenVPN terminate old pid: 72901
Dec 6 14:18:00 php-fpm 77565 /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Dec 6 14:17:59 kernel em0: link state changed to DOWN
Dec 6 14:17:59 check_reload_status Linkup starting em0
Dec 6 14:17:59 php-fpm 90414 /rc.linkup: HOTPLUG: Configuring interface wan
Dec 6 14:17:59 php-fpm 90414 /rc.linkup: DEVD Ethernet attached event for wan
Dec 6 14:17:59 check_reload_status Reloading filter
Dec 6 14:17:58 php-fpm 8575 /rc.start_packages: Restarting/Starting all packages.
Dec 6 14:17:58 php-fpm 26907 /rc.linkup: DEVD Ethernet detached event for wan
Dec 6 14:17:58 check_reload_status Reloading filter
Dec 6 14:17:58 check_reload_status updating dyndns wan
Dec 6 14:17:56 php-fpm 77565 /rc.newwanip: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1512541076] unbound[32063:0] error: bind: address already in use [1512541076] unbound[32063:0] fatal error: could not open ports'Any device plz?
-
problem solved by:
Interfaces > WAN > Speed and Duplex
from autoselect to 100baseTX full-duplex (100MB line)no more unstable
-
If you have to manually configure it, there's something wrong somewhere. Both ends are supposed to auto negotiate and setting one end, but not the other can cause problems. What happens if you connect another computer? If it does the same, there's an issue with the modem. If it stops, the problem is with your firewall computer.