Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    HA CARP - IPv6 Two masters

    Scheduled Pinned Locked Moved HA/CARP/VIPs
    56 Posts 11 Posters 14.9k Views 6 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DerelictD Offline
      Derelict LAYER 8 Netgate
      last edited by

      My secondary:

      xn2: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      ether 4e:f6:47:4c:0e:df
      hwaddr 4e:f6:47:4c:0e:df
      inet6 fe80::4cf6:47ff:fe4c:edf%xn2 prefixlen 64 scopeid 0x7
      inet6 2001:beef:cafe:7e02::3 prefixlen 64
      inet6 2001:beef:cafe:7e02::1 prefixlen 64 vhid 240
      inet 172.25.237.3 netmask 0xffffff00 broadcast 172.25.237.255
      inet 172.25.237.1 netmask 0xffffff00 broadcast 172.25.237.255 vhid 237
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet manual
      status: active
      carp: BACKUP vhid 237 advbase 1 advskew 100
      carp: BACKUP vhid 240 advbase 1 advskew 100

      Your secondary:

      bce0.715: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
              options=80003 <rxcsum,txcsum,linkstate>ether 00:24:81:88:f1:06
              inet6 fe80::224:81ff:fe88:f106%bce0.715 prefixlen 64 scopeid 0xf
              inet6 fd57:187e:523f:715::b prefixlen 64
              inet 172.26.8.67 netmask 0xffffffc0 broadcast 172.26.8.127
              inet 172.26.8.65 netmask 0xffffffc0 broadcast 172.26.8.127 vhid 212
              nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
              status: active
              vlan: 715 vlanpcp: 0 parent interface: bce0
              carp: MASTER vhid 213 advbase 1 advskew 100
              carp: BACKUP vhid 212 advbase 1 advskew 100
              groups: vlan

      Note the absence of the CARP VIP on the interface itself.

      It looks like the interface is confused. Not sure. Have you rebooted the secondary?

      I was able to get mine into a strange state but only by manually issuing ifconfig commands in the shell. You probably want to make sure everything looks good in the VIP settings and reboot the secondary.</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,linkstate></up,broadcast,running,promisc,simplex,multicast></performnud,auto_linklocal></up,broadcast,running,promisc,simplex,multicast>

      Chattanooga, Tennessee, USA
      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
      Do Not Chat For Help! NO_WAN_EGRESS(TM)

      1 Reply Last reply Reply Quote 0
      • R Offline
        rhwendt
        last edited by

        Yeah i noticed that as well when i was replying earlier.  I have rebooted the device and that doesnt clear the issue.
        I'm pretty sure its not a L2 issue because the v4 carp vip works and is on the same vlan 210/715.

        I am seeing this in the logs in the backup device.

        Dec 5 20:18:45 php-fpm 71243 /xmlrpc.php: The command '/sbin/ifconfig 'bce0.715' inet6 'fd57:187e:523f:0715::f' delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
        Dec 5 20:18:45 php-fpm 71243 /xmlrpc.php: The command '/sbin/ifconfig 'bce0.210' inet6 '2001:1960:20:D2::F' delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
        Dec 5 20:18:45 kernel ifa_maintain_loopback_route: insertion failed for interface bce0.715: 17
        Dec 5 20:18:45 php-fpm 71243 /xmlrpc.php: The command '/sbin/ifconfig bce0.715 inet6 'fd57:187e:523f:0715::f' prefixlen '64' alias vhid '213'' returned exit code '1', the output was 'ifconfig: ioctl (SIOCAIFADDR): File exists'
        Dec 5 20:18:45 kernel ifa_maintain_loopback_route: insertion failed for interface bce0.210: 17
        Dec 5 20:18:45 php-fpm 71243 /xmlrpc.php: The command '/sbin/ifconfig bce0.210 inet6 '2001:1960:20:D2::F' prefixlen '64' alias vhid '211'' returned exit code '1', the output was 'ifconfig: ioctl (SIOCAIFADDR): File exists'

        1 Reply Last reply Reply Quote 0
        • DerelictD Offline
          Derelict LAYER 8 Netgate
          last edited by

          Yeah. I get that is what you are seeing.

          There is nothing systemic regarding IPv6 and CARP. It has to be something in your config.

          Make sure all the interfaces match exactly in order and in name.

          Make sure all the IP aliases and other VIPs match exactly, except for the advskew.

          Chattanooga, Tennessee, USA
          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
          Do Not Chat For Help! NO_WAN_EGRESS(TM)

          1 Reply Last reply Reply Quote 0
          • R Offline
            rhwendt
            last edited by

            Ok I figured out how to get it to a normal state (all master on primary and all backup on secondary).
            You need to reboot the backup firewall, and while its rebooting clear the firewall states on the primary.
            Carp failover works perfectly when its like this but there is still an issue.

            ANY configuration sync (manual/auto) from the primary to the backup causes the backup to become master on the two IPV6 carps.

            1 Reply Last reply Reply Quote 0
            • DerelictD Offline
              Derelict LAYER 8 Netgate
              last edited by

              None of that is necessary in a "normal" environment. I reboot the VMs all the time. Just works.

              Chattanooga, Tennessee, USA
              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
              Do Not Chat For Help! NO_WAN_EGRESS(TM)

              1 Reply Last reply Reply Quote 0
              • R Offline
                rhwendt
                last edited by

                @Derelict:

                None of that is necessary in a "normal" environment. I reboot the VMs all the time. Just works.

                I'm not really following you on this one. I'm not running these on VM's but that doesn't matter.
                I don't want to have to reboot a physical machine or a VM every time I make a configuration change.

                This is not a L2 issue. This smells like a bug.

                1 Reply Last reply Reply Quote 0
                • awebsterA Offline
                  awebster
                  last edited by

                  Works great for me… (IPs masked to protect the innocent), but I did find that increasing ADVBASE to 10 on the backup as opposed to default 1 helped alot (maybe its because these are running on ESXi), anyway that's my recipe and I'm sticking to it.
                  Consequently on the backup uncheck "virtual IPs" in the System / High Availability Sync page.

                  MASTER

                  em0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                          options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:29:43:51:32
                          hwaddr 00:0c:29:43:51:32
                          inet6 fe80::20c:29ff:fe43:5132%em0 prefixlen 64 scopeid 0x1
                          inet AA.BB.CC.226 netmask 0xfffffff8 broadcast AA.BB.CC.231
                          inet6 xxxx:xxxx::1c prefixlen 125
                  **        inet6 xxxx:xxxx::1e prefixlen 125 vhid 244**
                  **        inet AA.BB.CC.225 netmask 0xfffffff8 broadcast AA.BB.CC.231 vhid 242**
                          nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                          status: active
                          carp: MASTER vhid 244 advbase 1 advskew 0
                          carp: MASTER vhid 242 advbase 1 advskew 0
                  em1: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                          options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:29:43:51:3c
                          hwaddr 00:0c:29:43:51:3c
                          inet6 fe80::20c:29ff:fe43:513c%em1 prefixlen 64 scopeid 0x2
                          inet XX.YY.ZZ.251 netmask 0xffffff00 broadcast XX.YY.ZZ.255
                          inet6 xxxx:xxxx:10:2800::2 prefixlen 64
                  **        inet XX.YY.ZZ.254 netmask 0xffffff00 broadcast XX.YY.ZZ.255 vhid 240**
                  **        inet6 xxxx:xxxx:10:2800::1 prefixlen 64 vhid 241**
                          nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                          status: active
                          carp: MASTER vhid 240 advbase 1 advskew 0
                          carp: MASTER vhid 241 advbase 1 advskew 0

                  BACKUP

                  em0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                          options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:29:4c:da:30
                          hwaddr 00:0c:29:4c:da:30
                          inet6 fe80::20c:29ff:fe4c:da30%em0 prefixlen 64 scopeid 0x1
                          inet AA.BB.CC.227 netmask 0xfffffff8 broadcast AA.BB.CC.231
                          inet6 xxxx:xxxx::1d prefixlen 125
                  **        inet6 xxxx:xxxx::1e prefixlen 125 vhid 244**
                  **        inet AA.BB.CC.225 netmask 0xfffffff8 broadcast AA.BB.CC.231 vhid 242**
                          nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                          status: active
                          carp: BACKUP vhid 244 advbase 10 advskew 100
                          carp: BACKUP vhid 242 advbase 10 advskew 100
                  em1: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                          options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:29:4c:da:3a
                          hwaddr 00:0c:29:4c:da:3a
                          inet6 fe80::20c:29ff:fe4c:da3a%em1 prefixlen 64 scopeid 0x2
                          inet XX.YY.ZZ.252 netmask 0xffffff00 broadcast XX.YY.ZZ.255
                          inet6 xxxx:xxxx:10:2800::3 prefixlen 64
                  **        inet XX.YY.ZZ.254 netmask 0xffffff00 broadcast XX.YY.ZZ.255 vhid 240**
                  **        inet6 xxxx:xxxx:10:2800::1 prefixlen 64 vhid 241**
                          nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                          status: active
                          carp: BACKUP vhid 240 advbase 10 advskew 100
                          carp: BACKUP vhid 241 advbase 10 advskew 100</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,promisc,simplex,multicast>

                  –A.

                  1 Reply Last reply Reply Quote 0
                  • DerelictD Offline
                    Derelict LAYER 8 Netgate
                    last edited by

                    Doesn't sound like a bug because far too many people are NOT seeing the issue. It is something specific to the way you have it configured or something in your environment.

                    Chattanooga, Tennessee, USA
                    A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                    DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                    Do Not Chat For Help! NO_WAN_EGRESS(TM)

                    1 Reply Last reply Reply Quote 0
                    • R Offline
                      rhwendt
                      last edited by

                      Thank you all for helping.

                      I just factory rest both devices today and set them up from scratch again.
                      All the carp interfaces were working as expected except the IPV6 ULA CARP for the LAN (fd57:187e:523f:715::f/64)
                      It was exhibiting the same issues i was seeing prior to the factory reset, both primary and secondary both showing master.
                      The IPV6 GUA on the wan was working as expected
                      If I rebooted the secondary firewall all the carp interfaces would be in backup status. Anytime I synced the config from the primary it would cause the double master status.

                      I was able to find a solution based off what awebster said about unchecking the virtual ip in the HA sync.
                      I unchecked this option and rebooted the secondary firewall and now all the carp interfaces are showing the correct status and config syncing doesnt affect them.

                      1 Reply Last reply Reply Quote 0
                      • DerelictD Offline
                        Derelict LAYER 8 Netgate
                        last edited by

                        Just to be sure there wasn't something somewhere that misbehaved with ULA and CARP:

                        Primary:

                        xn5: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                        options=3 <rxcsum,txcsum>ether ee:c2:d9:d8:55:46
                        hwaddr ee:c2:d9:d8:55:46
                        inet6 fe80::ecc2:d9ff:fed8:5546%xn5 prefixlen 64 scopeid 0xd
                        inet6 fda9:cfd8:f9f:1000::2 prefixlen 64
                        inet6 fda9:cfd8:f9f:1000::1 prefixlen 64 vhid 243
                        inet 192.168.123.2 netmask 0xffffff00 broadcast 192.168.123.255
                        inet 192.168.123.1 netmask 0xffffff00 broadcast 192.168.123.255 vhid 242
                        nd6 options=21 <performnud,auto_linklocal>media: Ethernet manual
                        status: active
                        carp: MASTER vhid 242 advbase 1 advskew 0
                        carp: MASTER vhid 243 advbase 1 advskew 0

                        Secondary:

                        xn5: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                        ether 6e:24:e4:84:f5:f9
                        hwaddr 6e:24:e4:84:f5:f9
                        inet6 fe80::6c24:e4ff:fe84:f5f9%xn5 prefixlen 64 scopeid 0xa
                        inet6 fda9:cfd8:f9f:1000::3 prefixlen 64
                        inet6 fda9:cfd8:f9f:1000::1 prefixlen 64 vhid 243
                        inet 192.168.123.3 netmask 0xffffff00 broadcast 192.168.123.255
                        inet 192.168.123.1 netmask 0xffffff00 broadcast 192.168.123.255 vhid 242
                        nd6 options=21 <performnud,auto_linklocal>media: Ethernet manual
                        status: active
                        carp: BACKUP vhid 242 advbase 1 advskew 100
                        carp: BACKUP vhid 243 advbase 1 advskew 100

                        Enter CARP Maintenance mode on Primary:

                        Primary:

                        xn5: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                        options=3 <rxcsum,txcsum>ether ee:c2:d9:d8:55:46
                        hwaddr ee:c2:d9:d8:55:46
                        inet6 fe80::ecc2:d9ff:fed8:5546%xn5 prefixlen 64 scopeid 0xd
                        inet6 fda9:cfd8:f9f:1000::2 prefixlen 64
                        inet6 fda9:cfd8:f9f:1000::1 prefixlen 64 vhid 243
                        inet 192.168.123.2 netmask 0xffffff00 broadcast 192.168.123.255
                        inet 192.168.123.1 netmask 0xffffff00 broadcast 192.168.123.255 vhid 242
                        nd6 options=21 <performnud,auto_linklocal>media: Ethernet manual
                        status: active
                        carp: BACKUP vhid 242 advbase 1 advskew 254
                        carp: BACKUP vhid 243 advbase 1 advskew 254

                        Secondary:

                        xn5: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                        ether 6e:24:e4:84:f5:f9
                        hwaddr 6e:24:e4:84:f5:f9
                        inet6 fe80::6c24:e4ff:fe84:f5f9%xn5 prefixlen 64 scopeid 0xa
                        inet6 fda9:cfd8:f9f:1000::3 prefixlen 64
                        inet6 fda9:cfd8:f9f:1000::1 prefixlen 64 vhid 243
                        inet 192.168.123.3 netmask 0xffffff00 broadcast 192.168.123.255
                        inet 192.168.123.1 netmask 0xffffff00 broadcast 192.168.123.255 vhid 242
                        nd6 options=21 <performnud,auto_linklocal>media: Ethernet manual
                        status: active
                        carp: MASTER vhid 242 advbase 1 advskew 100
                        carp: MASTER vhid 243 advbase 1 advskew 100

                        Fails back fine, too.</performnud,auto_linklocal></up,broadcast,running,promisc,simplex,multicast></performnud,auto_linklocal></rxcsum,txcsum></up,broadcast,running,promisc,simplex,multicast></performnud,auto_linklocal></up,broadcast,running,promisc,simplex,multicast></performnud,auto_linklocal></rxcsum,txcsum></up,broadcast,running,promisc,simplex,multicast>

                        Chattanooga, Tennessee, USA
                        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                        Do Not Chat For Help! NO_WAN_EGRESS(TM)

                        1 Reply Last reply Reply Quote 0
                        • A Offline
                          aeburriel
                          last edited by

                          I've been dealing with the same problem in my HA setup and it turned to be related to bug #6579
                          https://redmine.pfsense.org/issues/6579

                          The affected CARP IPv6 address was something like:
                          2001:aaaa:bbb:ccc:0d00:ffff:ffff:ffff
                          After removing leading zeros:
                          2001:aaaa:bbb:ccc:d00:ffff:ffff:ffff

                          CARP started to work reliably on that interface

                          1 Reply Last reply Reply Quote 0
                          • DerelictD Offline
                            Derelict LAYER 8 Netgate
                            last edited by

                            Nice catch.

                            LAN@213  fd57:187e:523f:0715::f    MASTER

                            Chattanooga, Tennessee, USA
                            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                            Do Not Chat For Help! NO_WAN_EGRESS(TM)

                            1 Reply Last reply Reply Quote 0
                            • I Offline
                              IcePick
                              last edited by

                              I am having exactly the same as this since moving to 2.4 from 2.3.5
                              interesting only on 2 of the 4 IPv6 CARPs
                              they were the only 2 that could use :: in their address
                              I tried expanding to 0:0:0:
                              it did not help

                              I have confirmed by packet capture that packets to ff02::12 are seen on both systems

                              –------------
                              Ok I figured out how to get it to a normal state (all master on primary and all backup on secondary).
                              You need to reboot the backup firewall, and while its rebooting clear the firewall states on the primary.
                              Carp failover works perfectly when its like this but there is still an issue.

                              ANY configuration sync (manual/auto) from the primary to the backup causes the backup to become master on the two IPV6 carps.

                              1 Reply Last reply Reply Quote 0
                              • I Offline
                                IcePick
                                last edited by

                                To reiterate I did not have this issue until upgrading from 2.3.5 to 2.4.2-RELEASE-p1, or at least it seemed to have gotten worse.

                                More testing:
                                changed from x::1 (ie X:0:0:0:1)  to x:1:1:1:1
                                on one of the CARP interfaces and the problem went away
                                Did not change the real interface IP

                                UPDATE: it worked for the first one, but broke both after I changed the second one.
                                Why are these 2 different then the other 2?
                                they connect to the same switch
                                I found a difference, one set of addresses used all lower case for the hex in the address, the none working ones had capitals.
                                I have changed all to lower and rebooted B unit and it came up all in backup, did not have to reset states on A firewall.
                                I'm not saying this is the issue - but giving people ideas of what I found
                                So in summary: using all lower case for hex and changed the addresses to ones that can not condense to ::

                                1 Reply Last reply Reply Quote 0
                                • A Offline
                                  anthonysomerset
                                  last edited by

                                  Just want to add i appear to have hit this "bug" in one of our SG-4860 clusters

                                  our IPv6 addresses are in their shortened form with no leading zeros, had to reboot secondary to clear this out, will keep an eye on things

                                  1 Reply Last reply Reply Quote 0
                                  • X Offline
                                    xciter327
                                    last edited by

                                    I am also hitting something similar this in our office/test system.

                                    Both devices are connected to a Cisco 3560G switch. IGMP snooping and ipv6 mld snooping are disabled. All ports are set to "portfast". There are no "loops" in the network. There are no topology changes.

                                    You will notice that each one sees the others advertisements and their own.

                                    Primary:
                                    16:42:40.428976 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:42:42.597228 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36
                                    16:42:50.886692 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:42:52.607533 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36
                                    16:43:01.382988 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:43:02.612549 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36

                                    Backup:
                                    16:42:09.212760 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:42:12.573960 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36
                                    16:42:19.608720 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:42:22.578900 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36
                                    16:42:30.015028 IP6 fe80::ec4:7aff:feab:3724 > ff02::12: ip-proto-112 36
                                    16:42:32.585911 IP6 fe80::ec4:7aff:feac:821a > ff02::12: ip-proto-112 36

                                    This only happens for IPv6 CARP IPs.

                                    Here are the interfaces, just to confirm the vhid:

                                    Primary:
                                    igb0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                                    options=6400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso,rxcsum_ipv6,txcsum_ipv6>ether 0c:c4:7a:ac:82:1a
                                    hwaddr 0c:c4:7a:ac:82:1a
                                    inet6 fe80::ec4:7aff:feac:821a%igb0 prefixlen 64 scopeid 0x1
                                    inet6 xxxx:xxxx:1:2::3 prefixlen 124
                                    inet6 xxxx:xxxx:1:2::2 prefixlen 124 vhid 4
                                    inet yyy.yyy.233.108 netmask 0xfffffff0 broadcast yyy.yyy.233.111
                                    inet yyy.yyy.233.110 netmask 0xfffffff0 broadcast yyy.yyy.233.111 vhid 1
                                    nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                                    status: active
                                    carp: MASTER vhid 1 advbase 10 advskew 1
                                    carp: MASTER vhid 4 advbase 10 advskew 1

                                    Backup:
                                    igb0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
                                    options=6400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso,rxcsum_ipv6,txcsum_ipv6>ether 0c:c4:7a🆎37:24
                                    hwaddr 0c:c4:7a🆎37:24
                                    inet6 fe80::ec4:7aff:feab:3724%igb0 prefixlen 64 scopeid 0x1
                                    inet6 xxxx:xxxx:1:2::4 prefixlen 124
                                    inet yyy.yyy.233.109 netmask 0xfffffff0 broadcast yyy.yyy.233.111
                                    inet yyy.yyy.233.110 netmask 0xfffffff0 broadcast yyy.yyy.233.111 vhid 1
                                    nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
                                    status: active
                                    carp: MASTER vhid 4 advbase 10 advskew 101
                                    carp: BACKUP vhid 1 advbase 10 advskew 101

                                    So the CARP interface is correctly assigned to the primary node, but the backup one still claims its master in the dashboard and with "ifconfig igb0".</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso,rxcsum_ipv6,txcsum_ipv6></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso,rxcsum_ipv6,txcsum_ipv6></up,broadcast,running,promisc,simplex,multicast>

                                    1 Reply Last reply Reply Quote 0
                                    • DerelictD Offline
                                      Derelict LAYER 8 Netgate
                                      last edited by Derelict

                                      Why did you play with advbase/advskew?

                                      Use 1/0 on the primary that will sync 1/100 to the secondary. Then just leave it alone.

                                      Chattanooga, Tennessee, USA
                                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                      1 Reply Last reply Reply Quote 0
                                      • X Offline
                                        xciter327
                                        last edited by

                                        Yes. I did try multiple base values between 0 - 20 for the base and 0 and 1 for skew. The settings are correctly(+100 for skew) transferred to the backup unit. Still backup thinks it's primary for IPv6.

                                        1 Reply Last reply Reply Quote 0
                                        • DerelictD Offline
                                          Derelict LAYER 8 Netgate
                                          last edited by Derelict

                                          Are you 100% certain the case described in reply #15 ^ is not present?

                                          Use 1/0 on the primary that will sync 1/100 to the secondary. Then just leave it alone.

                                          Just do that. If changing it didn't correct it it is not the problem.

                                          Packet capture on both nodes and see if you see the CARP going out the interface or in the interface. You can filter on CARP only in Diagnostics > Packet Capture.

                                          Chattanooga, Tennessee, USA
                                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                          1 Reply Last reply Reply Quote 0
                                          • X Offline
                                            xciter327
                                            last edited by

                                            1. Regarding post #15 solution. I tried both shorthand(no leading zeroes) and full notation with nothing omitted.
                                            2. I included a tcpdump in my first post. It looks to me that they are both receiving each other's updates.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.