DNS over TLS forwarding howto
-
really… Let me look.
Well its a shitty cname to cname nonsense... Not good practice..
go.microsoft.com. 2810 IN CNAME go.microsoft.com.edgekey.net.
go.microsoft.com.edgekey.net. 437 IN CNAME e11290.dspg.akamaiedge.net.
e11290.dspg.akamaiedge.net. 2 IN A 23.45.146.138And if I had to guess, from my very limited understanding of the strict is the .com.edgekey.net is causing it issues.
Not like they don't warn you that strict could have issues with bad practice and naming conventions.
-
In some parts of the world (UK especially) isp's actually intercept and filter DNS queries (yes this would also catch queries using pfsense as the resolver as its outbound port 53 to query authoritative servers) so there is net value to carrying out DNS privacy. So I think in that case even using a 3rd party server would be worthwhile.
Not just UK… it happens in a number of developing countries I have lived in for various reasons. While a VPN is the best option it is not always ideal for all traffic and can cause certain issues. When I used to run Tomato firmware I used to use DNSCrypt with OpenDNS. At least this way I could be sure the DNS replies I was getting were not being intercepted and altered by my ISP. The solution to use unbound as a resolver isn't (I think) going to help against that at all.. is it?
I've read the various threads about DNSCrypt on here and don't really understand the reticence to implement it as an option. Most of the criticism seems to fall under "this isn't needed or useful against the threats in my use case scenario", because in most places ISPs are not actively intercepting…. but I believe it is useful in other use case scenarios. Personally I would like to see encryption of DNS traffic.
The desire (for me at least) is not so much about privacy but about the ability of the ISP to manipulate the DNS results and thus where I end up. I may not care that they know I'm visiting forum.pfsense.org, although I may care about some other sites in which case I'd use VPN, but I want to be sure that I'm not being sent instead to some fake site purporting to be forum.pfsense.org. I trust OpenDNS and pretty much any other major well-known western DNS provider a hell of a lot more than I trust my ISP to give clean results.
Disclaimer: I'm a newbie, be gentle :-)
-
To be honest, if on an isp that is intercepting your dns.. You should be using a vpn.. Because whatelse are they doing with your traffic if they are intercepting your dns?
If your in said country that is doing such things, really the only thing to do is vpn outside of that country before you send anything anywhere.. So that would be vpn solution.
Back to the strict setting.. Yeah seems doesn't like much of anything with MS that gets sent to the edgekey.net via cname… Couldn't get to blogs.technet.microsoft.com either I had to turn it off.
-
So why don't you just run through a vpn and be done with it?
Here is a question for you.. Are they actually doing interception, or is their isp dns is just not returning the stuff they want you not to go to? Its a whole different ball game to just block specific dns in your dns that your running vs intercepting users dns, or blocking outbound on 53..
Performance reasons, I dont need to redirect all my traffic, just DNS queries.
You really dont seem to like DNS privacy. :)
Although I do route my iptv boxes through a VPN. I like pfsense's policy routing abilities.
I request that you please dont ask anymore why we are doing this, this thread was made by the OP to discuss a how to, not why we doing it. DNSCrypt discussions got derailed in the same way.
-
I like my dns privacy very much… Why I run my own resolver.. What I don't understand is people with their shiny hats thinking that forwarding traffic to some specific NS out on the public internet is some sort of privacy.. Just beecause they are inside a tunnel.. Passing off this sort of setup as "privacy" is BS plain and simple... Its not privacy.. It circumvention of someone interfering with your traffic, or listening in on it.. But sending all of your queries to 1 specific company does not in any way shape or form promote "privacy"
More than happy to stay out of your discussion on a public forum.. Here to promote discussion and debate on topics related to pfsense.. Have at it.. ;) As you can see trying to help with the part of this discussion that actually makes sense. Use the qname security, etc. Roots don't need my FQDN, they just need the part of the FQDN they are responsible for.. But seems companies like to break that with bad use of names, bad practice of cname to cname, etc.
Even thanked the poster a few times for the info... But seems with all your wanting of "privacy" you not up for discussion of actual point of doing such a thing.. Cuz you can state privacy all you want - its not that.. Sorry... Back to your tunneling your traffic to some specific name server and sending them every single query you want to resolve all in one place ;)
-
I thought I would take a shot at this…I have attached a screenshot of my custom options in my DNS Resolver general settings. I am also running pfBlockerNG with DNSBL enabled, a pfB_DNSBL note was added when I enabled this.
I had to change the note a little("server:" had to have its own line), added "qname-minimisation: yes", restarted DNS resolver.
Does this enhance DNS privacy with just the "qname-minimisation: yes" or does one need to also add the "qname-minimisation-strict: yes"?
Does the order matter in terms of "include: /var/unbound/pfb_dnsbl.*conf" first then "qname-minimisation: yes" in this custom options?I am using DNS resolver(unbound), with unbound "Outgoing Network Interfaces" having just my VPN provider(I deselected WAN).
I tend to be more of a "shiny hat" kinda person....not sure if it is just "go.microsoft.com.edgekey.net" sites that break but I think I can live with out these sites...does this break Linkedin? Skype as well?
Awesome conversation and post from the forum...thank you all!
 -
"forwarding (to e.g. OpenDNS or Google instead of going to the root DNS servers)?"
Thought you said you read the RFC?? When you use the forwarder you do not talk to roots, you would have to send the forwarder the FULL thing your looking for, not just the pieces of the fqdn you need to find the authoritative server. So you could ask it for the record..
So in this scenario instead of asking roots hey whats the NS for .com in www.domain.com - its just asks hey whats the NS for .com
Then asks hey NS for .com whats the NS for domain.com, vs asking for NS of www.domain.comHow would that work with a forwarder?
You do not need to edit the conf file directly.. Just add it to the custom options box.
here… This simple.. see attached.
I ask the resolver hey www.testthisdomain.com and it just ask the NS for .com for testthisdomain.com vs the www.testthisdomain.com see attached sniff pic.
dig -x 192.31.80.30 +short
d.gtld-servers.net.;; QUESTION SECTION:
;com. IN NS;; ANSWER SECTION:
com. 172800 IN NS f.gtld-servers.net.
com. 172800 IN NS e.gtld-servers.net.
com. 172800 IN NS j.gtld-servers.net.
com. 172800 IN NS k.gtld-servers.net.
com. 172800 IN NS c.gtld-servers.net.
com. 172800 IN NS i.gtld-servers.net.
com. 172800 IN NS m.gtld-servers.net.
com. 172800 IN NS l.gtld-servers.net.
com. 172800 IN NS h.gtld-servers.net.
com. 172800 IN NS a.gtld-servers.net.
com. 172800 IN NS b.gtld-servers.net.
com. 172800 IN NS g.gtld-servers.net.
com. 172800 IN NS d.gtld-servers.net.Thanks John, that makes a lot more sense to me now. I actually went ahead and tried this out today with qname-minimisation: yes enabled, and forwarding disabled and so far I haven't had any issues with DNS lookups. I won't enable strict mode just yet as I saw that you guys ran into some issues with it.
I do have more general question through regarding the Unbound resolver though: In the past I've had the resolver enabled with forwarding and used Google's public DNS servers as the upstream DNS servers to forward queries to in order to try to improve performance. Today I disabled forwarding to try out qname-minimisation for better privacy and to be honest I've haven't really found browsing to be any slower (despite the additional lookups that may be occurring). I'm curious if everyone else thinks that the added privacy is worth a bit of a performance hit in DNS lookup speed or whether one would be better of just using a the resolver together with forwarding to a fast public DNS (e.g. Google). What does everyone think?
Thanks in advance.
-
Hmmmm…
Assuming you are using a caching resolver like unbound and its getting its DNS with a bit of added encryption overhead for end users it would not be much of a performance hit at all because only the first query is via TLS. Future queries will pull from the cache as long as they remain valid. I'd want the root servers to be what I was connecting to though.
Now here is the issue I see with the encryption. The server load. Its going to be just crazy with TLS added. I mean, I have DNS over TLS right now since it all comes from my pfsense in the USA over vpn. This is done for many reasons, one of which is privacy.
It will be more meaningful if TLS is rolled into unbound and bind and all the goodness starts with the root servers. Technology advances may make this feasible and may have already. Not sure.. I'm 100% sure the feature was not included due to hardware load issues and bandwidth considerations as well as latency. Not because the people who designed bind and unbound don't know how to write the code.
-
"I've haven't really found browsing to be any slower (despite the additional lookups that may be occurring)."
Not sure where that little bit of FUD started that resolving is going to be slower.. In any sense that would matter.. Unless your on a some really high latency connection. The only time that there would be any sort of delay would be a cold lookup having to walk all the way down.
So you asking google for something.. What is that 30ms.. What does it take to fully resolve something? Lets call it 300ms worst case – lets just say.. But that is only on the COLD lookup.. Your talking less then 3 tenths of a second..
After that then your 1ms since the next lookups for www.domain.tld will come from cache.
Now keep in mind that was FULL cold lookup.. Had to talk to roots.. But you have looked up the NS for the tld in question, you no longer have to go ask roots every time. you look up newdomain.tld.. It will go straight their for the NS of newdomain.tld
Keep in mind that talking to the authoritative servers means you will always get the FULL TTL... not whatever google had left on its timer.. So Maybe you got 10 seconds left, and then have to do a query again in 10 seconds. While your resolver got the full 1 hour ttl, etc. So if you got two queries in 1 hour the forwarder would have to get asked twice while you resolver would have only had to do the 1 lookup.
Once something is cached it all becomes moot if your resolving or forwarding. Since its cached.. So why would you care about a few ms difference when looking up something cold.. Your telling me you can tell the difference in your page load be it it took 30 ms or 300ms.. Really?
Keep in mind that 300ms is most likely really high exaggeration... But you could always do some testing if you curious... Just clear your unbound cache and then do a simple dig.. How long does it take to resolve..
Unless your isp is only allowing you to talk to its ns, or your on really high latency internet - say sat or something. Resolving is going to be better all the way around, privacy, security and performance is a non issue to be honest.. Since once something has been looked up.. Your client caches it at the os, the browser caches it, your local dns caches it.. Your not cold resolving every single time all the way down from roots, etc.
Shoot resolving can even be faster.. Once you know the NS for domainX, looking up any records in domainX now just mean talking directly to that NS - which could even be closer to you in RTT or faster to respond than google.. Here just did a query direct to google for forum.pfsense.org took 64ms. While query direct to the NS for pfsense.org only took 52 ms.. And got back more data.. Why anyone would forward - especially if privacy is a concern.. And just giving someone all your info vs spreading it around to just the authoritative servers your wanting to go too and the roots.. That are global controlled setup.. You really think they are tracking billy's IP is going to sites xyz and selling that info?
edit:
Resolver also has a setting or prefetch.. Which can remove the full Colds or even the talking to the authoritative NS delay out... Since the resolver will resolve www.domain.tld if someone asks for it when there is 10% or less left on the TTL.. So lets say the TTL is 24 hours.. If someone asks for that record and there is less than 2.4 hours left on the TTL then the resolver will refresh that info by resolving it again and now the TTL is back to 24 hours. In the back ground, so next query comes by for that record. Its there waiting in the 1ms response cache. No need to even go ask google for it at 30ms, etc.
-
I have tried using forwarding(to OpenDNS) and using unbound with no forwarding…I have found negligible difference in speed(didn't actually measure the speed, I just didn't notice while surfing), however after a reboot it can be very slow using unbound(John not sure that is what you mean by "Cold" lookup)...it then speeds up.
I did play with enable "qname-minimisation-strict" to see how it worked...I didn't do extensive testing but noticed it broke Skype while using the IOS app...
-
"I've haven't really found browsing to be any slower (despite the additional lookups that may be occurring)."
Not sure where that little bit of FUD started that resolving is going to be slower.. In any sense that would matter.. Unless your on a some really high latency connection. The only time that there would be any sort of delay would be a cold lookup having to walk all the way down.
So you asking google for something.. What is that 30ms.. What does it take to fully resolve something? Lets call it 300ms worst case – lets just say.. But that is only on the COLD lookup.. Your talking less then 3 tenths of a second..
After that then your 1ms since the next lookups for www.domain.tld will come from cache.
Now keep in mind that was FULL cold lookup.. Had to talk to roots.. But you have looked up the NS for the tld in question, you no longer have to go ask roots every time. you look up newdomain.tld.. It will go straight their for the NS of newdomain.tld
Keep in mind that talking to the authoritative servers means you will always get the FULL TTL... not whatever google had left on its timer.. So Maybe you got 10 seconds left, and then have to do a query again in 10 seconds. While your resolver got the full 1 hour ttl, etc. So if you got two queries in 1 hour the forwarder would have to get asked twice while you resolver would have only had to do the 1 lookup.
Once something is cached it all becomes moot if your resolving or forwarding. Since its cached.. So why would you care about a few ms difference when looking up something cold.. Your telling me you can tell the difference in your page load be it it took 30 ms or 300ms.. Really?
Keep in mind that 300ms is most likely really high exaggeration... But you could always do some testing if you curious... Just clear your unbound cache and then do a simple dig.. How long does it take to resolve..
Unless your isp is only allowing you to talk to its ns, or your on really high latency internet - say sat or something. Resolving is going to be better all the way around, privacy, security and performance is a non issue to be honest.. Since once something has been looked up.. Your client caches it at the os, the browser caches it, your local dns caches it.. Your not cold resolving every single time all the way down from roots, etc.
Shoot resolving can even be faster.. Once you know the NS for domainX, looking up any records in domainX now just mean talking directly to that NS - which could even be closer to you in RTT or faster to respond than google.. Here just did a query direct to google for forum.pfsense.org took 64ms. While query direct to the NS for pfsense.org only took 52 ms.. And got back more data.. Why anyone would forward - especially if privacy is a concern.. And just giving someone all your info vs spreading it around to just the authoritative servers your wanting to go too and the roots.. That are global controlled setup.. You really think they are tracking billy's IP is going to sites xyz and selling that info?
edit:
Resolver also has a setting or prefetch.. Which can remove the full Colds or even the talking to the authoritative NS delay out... Since the resolver will resolve www.domain.tld if someone asks for it when there is 10% or less left on the TTL.. So lets say the TTL is 24 hours.. If someone asks for that record and there is less than 2.4 hours left on the TTL then the resolver will refresh that info by resolving it again and now the TTL is back to 24 hours. In the back ground, so next query comes by for that record. Its there waiting in the 1ms response cache. No need to even go ask google for it at 30ms, etc.Thanks John for taking the time to craft this very helpful response. After reading what you wrote and doing a bit more research on my own (looking through past threads on Unbound and performance) I understand the tradeoff's far better now. This thread was also very helpful:
https://forum.pfsense.org/index.php?topic=112160.0
I think a lot of the performance concerns can be traced back to the fact that a good number of domains today have pretty short TTL's (e.g. like www.cnn.com in the thread linked above). So on a small network (e.g. a home network), the TTL will expire after a few minutes necessitating another lookup the next time someone makes a DNS request for that same website. That lookup may/may not be faster than going against e.g. Google's DNS servers which likely already have the DNS record in question cached. I think that's probably where the main privacy/performance tradeoff comes in. In my opinion, adding up to a few tenths of a second of additional latency is worth it instead of sending all queries to one set of DNS servers on the internet. If speed is of upmost concern then using then using Unbound with forwarding enabled (to a fast DNS server with a large cache) is probably an option to consider.
Now it's possible to tweak the TTL values on Unbound to improve performance. Frankly, I wouldn't really want to touch the minimum TTL value (default is 0) since you run the risk of then having expired/bad records in the cache. However, what do you think about the max TTL value? I see that it is set to 86400 (1 day) by default. By running dig to a few sites on the net I saw that the expiry on records can be higher. Would it be bad idea to increase this value to two days (172800) instead to make sure that cache records don't expire prematurely?
–------------------
Anyway, I do not want to take this thread too far off-topic. I found some additional information regarding using Unbound over TLS:
https://calomel.org/unbound_dns.html
In general, I would agree with what kejianshi posted. Seems to me the additional overhead would add enough load on servers to slow down what was intended to be fast and lightweight protocol. That being said, hardware and connections speeds have continued to improve, so would be cool if this could be implemented at some point. For now, I think using the Unbound resolver with forwarding disabled (and the qname-minimisation option discussed in this thread enabled) is an easy to improve privacy by 1. limiting the amount of information that is shared during the recursive DNS lookup and 2) spreading the DNS request across multiple servers from multiple orgs vs. just one.
Thanks again to all for this great discussion.
-
Unbound in particular makes for a pretty poor client for dns over tls at the moment. If you look at the implementation progress, it doesn't support reusing sessions or out of order queries. As a server these are no issue but as a client it will mean creating and tearing down a connection with each query. This matters because unbound is effectively the dns client in this example.
Freebsd seems really good at keeping up with unbound releases, so hopefully in the not too distant future this won't be the case.
-
I'm curious if anyone had an opinion on whether it might make sense to increase the max TTL value in the resolver from 1 to 2 days to potentially improve cache performance? Or is best to keep it at 1 day or lower? Thanks again.
-
I'm curious if anyone had an opinion on whether it might make sense to increase the max TTL value in the resolver from 1 to 2 days to potentially improve cache performance? Or is best to keep it at 1 day or lower? Thanks again.
I expect not much to change with that. You should just enable prefetch support. When the 1 day period expires it'll check for an update to refresh the cache prior to you requesting it.
-
guys what really helps in losing google dns caching hit rates, is the new unbound feature called serve-expired. It is now in the pfsense GUI as one of the advanced options, so you need only tick the box.
What it does is when a dns record is cached, even when TTL hits 0 (expired) a new lookup from the lan will serve the cached record but at the same time the cache is updated so the next lookup after is more up to date.
So you can enable the privacy stuff, use your own forwarder or do direct lookups from pfsense unbound, and this option mitigates most cold cache issues.
-
guys what really helps in losing google dns caching hit rates, is the new unbound feature called serve-expired. It is now in the pfsense GUI as one of the advanced options, so you need only tick the box.
What it does is when a dns record is cached, even when TTL hits 0 (expired) a new lookup from the lan will serve the cached record but at the same time the cache is updated so the next lookup after is more up to date.
So you can enable the privacy stuff, use your own forwarder or do direct lookups from pfsense unbound, and this option mitigates most cold cache issues.
So I saw this option a couple weeks ago and started wondering if there would be any adverse impact to using it. I suppose there is the chance that the first lookup returns an incorrect result and an outdated page (or no page at all). A quick refresh/reload on the browser should fix that though (since the cache has refreshed in the background). Are there any security considerations one should be aware of when enabling this feature? I actually decided to try it (i.e. enable serve-expired) out and so far everything is working fine. I can see this option as potentially being beneficial on smaller networks with fewer clients.
This leads me to a more general question: Why do a lot of major sites have short TTL's these days? Is this being done for load balancing reasons?
Thanks in advance.
-
There is a chance of course you end up going to an invalid ip, but in my experience the chance of that happening is extremely tiny. The providers that set silly low TTL that last just a few seconds change so they can redirect quickly in the event of an outage and for load balancing purposes, I cannot remember this causing me a problem in the several weeks I have been using it.
-
how to know if it working?
my dig result are still using port 53
dig google.com ; <<>> DiG 9.11.2-P1 <<>> google.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 53396 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 4, ADDITIONAL: 9 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;google.com. IN A ;; ANSWER SECTION: google.com. 29 IN A 216.58.196.14 ;; AUTHORITY SECTION: google.com. 38383 IN NS ns2.google.com. google.com. 38383 IN NS ns3.google.com. google.com. 38383 IN NS ns1.google.com. google.com. 38383 IN NS ns4.google.com. ;; ADDITIONAL SECTION: ns2.google.com. 40481 IN A 216.239.34.10 ns2.google.com. 239457 IN AAAA 2001:4860:4802:34::a ns3.google.com. 62066 IN A 216.239.36.10 ns3.google.com. 241432 IN AAAA 2001:4860:4802:36::a ns4.google.com. 48518 IN A 216.239.38.10 ns4.google.com. 239690 IN AAAA 2001:4860:4802:38::a ns1.google.com. 62057 IN A 216.239.32.10 ns1.google.com. 240075 IN AAAA 2001:4860:4802:32::a ;; Query time: 76 msec ;; SERVER: 1.1.1.1#53(1.1.1.1) ;; WHEN: Mon Apr 02 13:36:49 +08 2018 ;; MSG SIZE rcvd: 303 -
server: ssl-upstream: yes do-tcp: yes forward-zone: name: "." forward-addr: {ipv4address}@853 forward-addr: {ipv6address}@853This configuration causes lookup delays for me when a Domain Override is configured, perhaps because it affects how unbound tries to connect to the override server.
I don't experience the delays with this configuration:
forward-zone: name: "." forward-ssl-upstream: yes forward-addr: 9.9.9.9@853 forward-addr: 2620:fe::fe@853 -
Is it possible to use both DNS over TLS AND pfblockerng DNSBL in custom settings? currently I have this line under custom settings:```
server:include: /var/unbound/pfb_dnsbl.*confI tried adding the TLS code under that line but it didn't work. :(
