Portforwarding FIN_WAIT_2:FIN_WAIT_2
-
The situation :
Wan fixed ip
Lan 10.70.200.254
VLAN 100 : 10.70.100.254
VLAN 180 : 192.168.3.1Rules on VLAN's everything to everything
Device 192.168.3.28(with webservice) on VLAN 180
I can reach this device from VLAN 100, no problemNow i want to reach this device from outside.
I created a NAT portforwarding.
The port i choosed was 42536. The setting :INT pro SA SP dest.adr dest.p. NAT IP NAT Port
WAN TCP * * WAN address 42536 192.168.3.28 (http)80
I checked the port and this is een open port (portchecker)
When i go to ip-Wanadress with port(42536) from home, i get follow (in the state table) :
Interface protocol source(original source) Destination(original destination) state pakkets Bytes
WAN TCP home-address:55177 192.168.3.28:80(wanaddress:42536) FIN_WAIT_2:FIN_WAIT_2 6 / 4 658 B / 257 B
So i get no website due the Fin_Wait_2
What (where) can i do to solve this problem?
It's already day's i struggle with it.
Please help me
-
So your trying to do nat reflection - did you enable that? test your access from the actual outside.. Not a nat reflection.
-
NAT Reflection mode for port forward is disabled (system-advanced-firewallNAT)
I have enabled on pure NAT –> no connection and still FIN_WAIT_2
i have enabled NAT + Proxy --> no site and still FIN_WAIT_2
Thanks for reply
-
You do undestand fin_wait 2 is normal after fin.. Normally this is a faulty application.. And you sure your not looking at old states..
Why exactly do you even need nat reflection - just access the http directly.. Does your port forward work from outside… Then your down.. There is zero reason for nat reflection.. just use a host override to access the local IP be whatever name is you want that you use on the outside.