External Access To Server
-
Hi, I have a NAS (OMV) to share in my lan files and folders, and now I install and setup a Subsonic service and it's runnig ok.
I have a NO-IP register and when I put my domain example.com PFSense loguin page is load but if I put example.com:4040 Subsonic page is load.
How configure to make the PFSense load the Subsonic page just using example.com without the port?
The config is:
Firewall / NAT / Port Forward
Interface: WAN
Protocol: TCP
Destination: Any
Destination Port Range: Other 4040 Other 4040
Redirect target IP: ip of my NAS
Redirect target port: Other 4040
NAT reflection: Enable (NAT + Proxy)
File rule association: Rule NAT Music ServerFirewall / Rules
Action: Pass
Interface: WAN
Protocol: TCP
Source: Any
Destination: singles hot or alias - ip of my NAS
Destination port range: Other 4040 Other 4040 -
How configure to make the PFSense load the Subsonic page just using example.com without the port?
Change the port that pfSense listens on from tcp/80 to something else (System - Advanced - Admin Access), then change your port forward from 4040 to 80.
-
@KOM:
How configure to make the PFSense load the Subsonic page just using example.com without the port?
Change the port that pfSense listens on from tcp/80 to something else (System - Advanced - Admin Access), then change your port forward from 4040 to 80.
Perfect! It's working! Thank u so much!
One more: how I can monitor who is connected to my NAS? Maybe a Log? Real time monitor?
-
There are several. For me, the quickest is to go to Diagnostics - States and filter based on the IP of the NAS.
In general, I recommend against placing these types of services so that the public can access them. Configure OpenVPN and then connect to your LAN via VPN, then hop over to the NAS.