PfSense underperforming, high jitter + random packet loss
-
Nic is Intel dual port server grade
-
Tested using a brand new Intel I350T2V2, exactly the same results.
-
My ping spikes up to 300ms sure but it goes down and I get A with no interruption to the services same on UT, can you post your results with Intel nic ? was the internet slow while performing the test ? try traffic shaper with HFSC and enable codel on every q and post your results,
-
The issue seems to be entirely with ALTQ shaping.
I decided to spend the day booted natively into pfSense (home alone, so nobody to be bothered with intermittent internet and no access to the TV) to troubleshoot this.
Ultimately after different iterations of ALTQ shapers with and without codel I couldn't find a single one that offered even remotely acceptable performance and that didn't introduce gigantic latency / bufferings spikes.
I decide to try this: https://forum.pfsense.org/index.php?topic=126637.0
Lo-and-behold, it worked like a charm. Using dummynet and real fq_codel on limiters gives me results I would expect without the altq insanity.
https://www.dslreports.com/speedtest/26865693I don't know if I'm the only one experiencing thing, but it honestly seems like currently altq is introducing side effects worse than the problems it is supposed to fix.
-
pfSense 2.4.3 alphabeta built on Sat Dec 16 11:23:26 CST 2017,
Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz e3c226d2i (2xi210 LAN)
tunables
kern.ipc.maxsockbuf 256000000
hw.igb.rxd="4096"
hw.igb.txd="4096"
net.inet.tcp.syncache.hashsize=1024
net.inet.tcp.syncache.bucketlimit=100
net.isr.defaultqlimit=4096
net.link.ifqmaxlen=10240
hw.igb.rx_process_limit="-1"
hw.igb.num_queues=2
dev.igb.0.fc=0
dev.igb.1.fc=0
kern.ipc.nmbjumbo9="20000"
kern.ipc.nmbclusters="1000000"
WAN is PPPoE 300/300Mbit over gigabit LAN to ISP router (some CISCO with 10G fiber optic connection)FQ_CODEL enabled, Hi-Res bufferbloat and other settings as posted by NaterGator:
http://www.dslreports.com/speedtest/26877901
FQ_CODEL enabled, Hi-Res bufferbloat and 30/30 streams:
http://www.dslreports.com/speedtest/26877933
FQ_CODEL disabled, Hi-Res bufferbloat and other settings as posted by NaterGator:
http://www.dslreports.com/speedtest/26877771
FQ_CODEL disabled, Hi-Res bufferbloat and 30/30 streams:
http://www.dslreports.com/speedtest/26877806
FQ_CODEL disabled, no tunables, Hi-Res bufferbloat and other settings as posted by NaterGator:
http://www.dslreports.com/speedtest/26877572
FQ_CODEL disabled, no tunables, Hi-Res bufferbloat and 30/30 streams:
http://www.dslreports.com/speedtest/26877682
I do not see any huge difference, just some fluctuations that are mostly on ISP side I think.
If you want me to test ALTQ shaper, please provide some sample configuration. But really, I have had some not very good experience with ALTQ at least it have twice as much overhead bandwidth comparing to IPFW shaper.
-
Interesting results… I wonder if asymmetric link bandwidth is having a greater influence?
This was my "typical" basic altq test with no limiter/fq_codel: https://i.imgur.com/d1vQLFc.png (only the one shaper on the WAN interface)
I also tried the configuration outlined here: http://www.speedtest.net/insights/blog/maximized-speed-non-gigabit-internet-connection/
Also...go bolts?
-
ALTQ CODELQ, NaterGator settings — http://www.dslreports.com/speedtest/27005845 As you can see dslreports automatucally dropped to 18 : 6 streams.
And for the 30/30 streams we have a problem! Triple test start ended with stuck on idle latency testing with spikes (failed due to overall timeout. error:2) and at the end I've got this with 24/24 http://www.dslreports.com/speedtest/27006168
And repeat test with FQ_CODEL and 30/30 — http://www.dslreports.com/speedtest/27006586
There is something broken in ALTQ CODELQ… -
Thanks for the extra effort and offering some level of confirmation that I'm not totally crazy. I'm not sure if this is an issue I should submit to the pfSense tracker or if this belongs upstream on FreeBSD's end.
FWIW: To reduce variables I use the preferences on the dslreports test to set fixed servers that I know are close by and a fixed number of streams.
-
You get great results :) using fq_codel. The minimum ping spike I could get was 150 something just on download, upload is fine , but I think ISP matters and also that you have a symmetrical speed makes a difference
-
Chrismallia, yes it's ISP, just very good ISP network at least in my location.
NaterGator, it's FreeBSD, but I don't think anybody cares ALTQ CODELQ, you have alternative with HFSC and codel enabled queue. I think next 3-5 years we will see some progress for IPFW or ALTQ — it does not matter they both need code to be rewritten from scratch, because of used 32-bit integers they both do not support modern traffic bandwidth (over 4 Gigs/sec). -
@w0w:
NaterGator, it's FreeBSD, but I don't think anybody cares ALTQ CODELQ, you have alternative with HFSC and codel enabled queue. I think next 3-5 years we will see some progress for IPFW or ALTQ — it does not matter they both need code to be rewritten from scratch, because of used 32-bit integers they both do not support modern traffic bandwidth (over 4 Gigs/sec).
Hmm, I do see this issue in HFSC with and without codel enabled. What I'm saying is any altq enabled shaping at all triggers the issue.
-
w0w
What is strange for me is that with no traffic shaping I get low ping spikes on download and high ping spikes on upload, when enabling any shaping including fq I get low ping spikes on upload but then get high ping spikes on download, see my results in post 3 if you may, I cant understand it
-
NaterGator, I did not tested HFSC for a long time, but I can test it also, later this week. Can you provide more settings regarding queues you have used? Did you change any other settings like RED or ECN, priority, queue limit in packets?
-
w0w
What is strange for me is that with no traffic shaping I get low ping spikes on download and high ping spikes on upload, when enabling any shaping including fq I get low ping spikes on upload but then get high ping spikes on download, see my results in post 3 if you may, I cant understand it
I have had some similar results, but I am not sure if it's some DSLreports bug or anything else, their server, or other problems, ex. ISP.
You should repeat your tests 10 times at least with traffic shaping and without, to make some conclusions. -
http://www.dslreports.com/speedtest/27223186 ALTQ HFSC codel enabled queue + ECN, dslreports 24/6 HD enabled
https://www.dslreports.com/speedtest/27223235 ALTQ HFSC codel enabled queue + ECN, dslreports 30/30 HD enabled — twice got failed due to overall timeout. error:2
http://www.dslreports.com/speedtest/27223412 FQ_CODEL againNaterGator did you try to set bandwidth limit for the ALQ shapers more tighten then for FQ_CODEL? I think it can be possible reason for the spikes you've got. The overhead for the ALTQ is slightly bigger so it's possible that it fails on a bandwidth limit. To make sure put the bandwidth to 50% of overall.
I can not explain why dslreports often fails to start with ALTQ CODEL and FQ_CODEL mostly never fails. May be it's by design of DSLreports or ALQ CODEL. :D
-
@w0w:
NaterGator did you try to set bandwidth limit for the ALQ shapers more tighten then for FQ_CODEL? I think it can be possible reason for the spikes you've got. The overhead for the ALTQ is slightly bigger so it's possible that it fails on a bandwidth limit. To make sure put the bandwidth to 50% of overall.
Oh yes, I tried some absurdly low limits just to be absolutely positive I had plenty of headroom, for example:
https://www.dslreports.com/speedtest/25228491The insane spikey buffering effect from ALTQ is definitely still there.
-
Did you try ECN on ALTQ? It is enabled by default on IPFW FQ_CODEL.
-
Yes, I tried with and without ECN.
