[Solved] WAN no longer comes up by itself in 2.4.2-RELEASE-p1
-
On Reboot I consistently see DHCP = DOWN for the WAN in Status => Interfaces. If I click Renew I then get IP(s) and processing resumes normally.
If I set IPV6 Configuration Type = None in my WAN configuration I lose IPV6 support but I then get an IPV4 address normally on reboot.
My set up is Comcast <=> Cisco DCP3008 Modem <=> Netgate SG-4860 <=> LAN.
This behavior began immediately after upgrading from 2.4.2 to 2.4.2-p1. Nothing else has changed.
I can live without IPV6 for now but something does not seem right with the DHCP client on reboot.
-
Turns out I had an evil cable connecting Modem <=> Router.
This apparently slowed speed and duplex negotiation during boot enough that the dhclient process was exiting with an error.
I have no idea why the DHCP6 setting had an influence.
Swapping out the evil cable fixed my issue.
-
Thanks for share the solution.