Pc engines alix 6f2 / MC7710 issue / 2.3.5-RELEASE-p1 (i386)
-
Hello,
how to make this modem to work ?.
MC7710 is on list => https://doc.pfsense.org/index.php/Known_Working_3G-4G_Modems
It's confirmed on this forum success working on APU2 devices with PPP.Board: Alix 6f2, BIOS v0.99m (Ericsson 2XGNJ - F5521GW works on this board like a charm)
System: 2.3.5-RELEASE-p1 (i386)
LTE Modem: Sierra Wireless MC7710 (generic with DIP Mode) / Firmware: SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14PPP is unable to connect on any of /dev/cuaU0.X port
CHAT: The modem is not responding to "AT" at ModemCmd: label.Dec 29 20:58:40 ppp [opt1_link0] Link: reconnection attempt 1500 in 1 seconds Dec 29 20:58:42 ppp [opt1_link0] Link: reconnection attempt 1500 Dec 29 20:58:56 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 20:58:56 ppp [opt1_link0] MODEM: chat script failed Dec 29 20:58:56 ppp [opt1_link0] Link: DOWN event Dec 29 20:58:56 ppp [opt1_link0] LCP: Down event Dec 29 20:58:56 ppp [opt1_link0] Link: reconnection attempt 1501 in 3 seconds Dec 29 20:58:59 ppp [opt1_link0] Link: reconnection attempt 1501 Dec 29 20:59:12 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 20:59:12 ppp [opt1_link0] MODEM: chat script failed Dec 29 20:59:12 ppp [opt1_link0] Link: DOWN event Dec 29 20:59:12 ppp [opt1_link0] LCP: Down event Dec 29 20:59:12 ppp [opt1_link0] Link: reconnection attempt 1502 in 1 seconds Dec 29 20:59:13 ppp [opt1_link0] Link: reconnection attempt 1502 Dec 29 20:59:28 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 20:59:28 ppp [opt1_link0] MODEM: chat script failed Dec 29 20:59:28 ppp [opt1_link0] Link: DOWN event Dec 29 20:59:28 ppp [opt1_link0] LCP: Down event Dec 29 20:59:28 ppp [opt1_link0] Link: reconnection attempt 1503 in 2 seconds Dec 29 20:59:30 ppp [opt1_link0] Link: reconnection attempt 1503 Dec 29 20:59:44 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 20:59:44 ppp [opt1_link0] MODEM: chat script failed Dec 29 20:59:44 ppp [opt1_link0] Link: DOWN event Dec 29 20:59:44 ppp [opt1_link0] LCP: Down event Dec 29 20:59:44 ppp [opt1_link0] Link: reconnection attempt 1504 in 1 seconds Dec 29 20:59:45 ppp [opt1_link0] Link: reconnection attempt 1504 Dec 29 21:00:01 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 21:00:01 ppp [opt1_link0] MODEM: chat script failed Dec 29 21:00:01 ppp [opt1_link0] Link: DOWN event Dec 29 21:00:01 ppp [opt1_link0] LCP: Down event Dec 29 21:00:01 ppp [opt1_link0] Link: reconnection attempt 1505 in 4 seconds Dec 29 21:00:05 ppp [opt1_link0] Link: reconnection attempt 1505 Dec 29 21:00:18 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 21:00:18 ppp [opt1_link0] MODEM: chat script failed Dec 29 21:00:18 ppp [opt1_link0] Link: DOWN event Dec 29 21:00:18 ppp [opt1_link0] LCP: Down event Dec 29 21:00:18 ppp [opt1_link0] Link: reconnection attempt 1506 in 4 seconds Dec 29 21:00:22 ppp [opt1_link0] Link: reconnection attempt 1506 Dec 29 21:00:35 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 21:00:35 ppp [opt1_link0] MODEM: chat script failed Dec 29 21:00:35 ppp [opt1_link0] Link: DOWN event Dec 29 21:00:35 ppp [opt1_link0] LCP: Down event Dec 29 21:00:35 ppp [opt1_link0] Link: reconnection attempt 1507 in 4 seconds Dec 29 21:00:39 ppp [opt1_link0] Link: reconnection attempt 1507 Dec 29 21:00:52 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. Dec 29 21:00:52 ppp [opt1_link0] MODEM: chat script failed Dec 29 21:00:52 ppp [opt1_link0] Link: DOWN event Dec 29 21:00:52 ppp [opt1_link0] LCP: Down event Dec 29 21:00:52 ppp [opt1_link0] Link: reconnection attempt 1508 in 2 seconds Dec 29 21:00:54 ppp [opt1_link0] Link: reconnection attempt 1508I can see serial ports:
[2.3.5-RELEASE][admin@beastie.localdomain]/root: ls -l /dev/cu* crw-rw---- 1 uucp dialer 0x67 Dec 29 20:14 /dev/cuaU0.0 crw-rw---- 1 uucp dialer 0x68 Dec 29 14:07 /dev/cuaU0.0.init crw-rw---- 1 uucp dialer 0x69 Dec 29 14:07 /dev/cuaU0.0.lock crw-rw---- 1 uucp dialer 0x6d Dec 29 15:46 /dev/cuaU0.1 crw-rw---- 1 uucp dialer 0x6e Dec 29 14:07 /dev/cuaU0.1.init crw-rw---- 1 uucp dialer 0x6f Dec 29 14:07 /dev/cuaU0.1.lock crw-rw---- 1 uucp dialer 0x73 Dec 29 14:07 /dev/cuaU0.2 crw-rw---- 1 uucp dialer 0x74 Dec 29 14:07 /dev/cuaU0.2.init crw-rw---- 1 uucp dialer 0x75 Dec 29 14:07 /dev/cuaU0.2.lock crw-rw---- 1 uucp dialer 0x79 Dec 29 14:48 /dev/cuaU0.3 crw-rw---- 1 uucp dialer 0x7a Dec 29 14:07 /dev/cuaU0.3.init crw-rw---- 1 uucp dialer 0x7b Dec 29 14:07 /dev/cuaU0.3.lock crw-rw---- 1 uucp dialer 0x7f Dec 29 14:48 /dev/cuaU0.4 crw-rw---- 1 uucp dialer 0x80 Dec 29 14:07 /dev/cuaU0.4.init crw-rw---- 1 uucp dialer 0x81 Dec 29 14:07 /dev/cuaU0.4.lock crw-rw---- 1 uucp dialer 0x85 Dec 29 14:07 /dev/cuaU0.5 crw-rw---- 1 uucp dialer 0x86 Dec 29 14:07 /dev/cuaU0.5.init crw-rw---- 1 uucp dialer 0x87 Dec 29 14:07 /dev/cuaU0.5.lock crw-rw---- 1 uucp dialer 0x29 Dec 29 14:07 /dev/cuau0 crw-rw---- 1 uucp dialer 0x2a Dec 29 14:07 /dev/cuau0.init crw-rw---- 1 uucp dialer 0x2b Dec 29 14:07 /dev/cuau0.lock crw-rw---- 1 uucp dialer 0x2f Dec 29 14:51 /dev/cuau1 crw-rw---- 1 uucp dialer 0x30 Dec 29 14:07 /dev/cuau1.init crw-rw---- 1 uucp dialer 0x31 Dec 29 14:07 /dev/cuau1.lock [2.3.5-RELEASE][admin@beastie.localdomain]/root:DMESG:
[2.3.5-RELEASE][admin@beastie.localdomain]/root: dmesg Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p22 #0 352658d6e(RELENG_2_3): Tue Oct 24 05:16:13 CDT 2017 root@ce23-i386-builder:/builder/pfsense-235/tmp/obj/builder/pfsense-235/tmp/FreeBSD-src/sys/pfSense_wrap i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU) Origin="AuthenticAMD" Id=0x5a2 Family=0x5 Model=0xa Stepping=2 Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>real memory = 268435456 (256 MB) avail memory = 226562048 (216 MB) pnpbios: Bad PnP BIOS data checksum random: <software, yarrow="">initialized ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc08151d0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0815280, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083cc70, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083cd20, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083cdd0, 0) error 1 wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0815120, 0) error 1 K6-family MTRR support enabled (2 registers) kbd0 at kbdmux0 ACPI BIOS Error (bug): A valid RSDP was not found (20150515/tbxfroot-258) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. pcib0 pcibus 0 on motherboard pci0: <pci bus="">on pcib0 Geode LX: PC Engines ALIX.6 v0.99m tinyBIOS V1.4a (C)1997-2007 pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 1.2 (no driver attached) vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0 vr0: Quirks: 0x2 vr0: Revision: 0x96 miibus0: <mii bus="">on vr0 ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr0: Ethernet address: 00:0d:b9:2f:b0:30 vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0 vr1: Quirks: 0x2 vr1: Revision: 0x96 miibus1: <mii bus="">on vr1 ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr1: Ethernet address: 00:0d:b9:2f:b0:31 isab0: <pci-isa bridge="">port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <amd cs5536="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ata1: <ata channel="">at channel 1 on atapci0 ohci0: <ohci (generic)="" usb="" controller="">mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0 usbus0 on ohci0 ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 cpu0 on motherboard pmtimer0 on isa0 orm0: <isa option="" rom="">at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0 atrtc0: <at realtime="" clock="">at port 0x70 irq 8 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer="">at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 ppc0: parallel port not found. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <amd>at usbus0 uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <amd>at usbus1 uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <atp 20140121="" compact="" flash="">ATA device ada0: Serial Number 99007150915130200371 ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes) ada0: 3831MB (7847280 512 byte sectors) ada0: Previously was known as ad0 random: unblocking device. Timecounter "TSC" frequency 498061515 Hz quality 800 Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.2: <sierra wireless,="" incorporated="">at usbus1 u3g0: <sierra 0="" 2="" wireless,="" incorporated="" mc7710,="" class="" 0,="" rev="" 2.00="" 0.06,="" addr="">on usbus1 u3g0: Found 6 ports. Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]... vr1: link state changed to DOWN vr1: link state changed to UP vr0: link state changed to DOWN ng0: changing name to 'ppp0' vr0: link state changed to UP tun1: changing name to 'ovpnc1' ovpnc1: link state changed to UP pflog0: promiscuous mode enabled ng0: changing name to 'ppp0' [2.3.5-RELEASE][admin@beastie.localdomain]/root:</sierra></sierra></atp></amd></amd></amd></amd></at></at></isa></amd></ohci></ata></ata></amd></isa></pci-isa></generic></mii></via></generic></mii></via></encrypt></pci></software></software,></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>DEVICE:
[2.3.5-RELEASE][admin@beastie.localdomain]/root: usbconfig ugen0.1: <ohci root="" hub="" amd="">at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen1.1: <ehci root="" hub="" amd="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <mc7710 sierra="" wireless,="" incorporated="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <probed by="" interface="" class="">bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x1199 idProduct = 0x68a3 bcdDevice = 0x0006 iManufacturer = 0x0003 <sierra wireless,="" incorporated="">iProduct = 0x0002 <mc7710>iSerialNumber = 0x0004 <358178042993362> bNumConfigurations = 0x0001</mc7710></sierra></probed></mc7710></ehci></ohci>Some AT stuff: (unfortunately this is done on my old laptop with Windows with Putty, via AT serial port, once again unfortunately without SIM slot)
What is wort attention that on ALIX i cannot send any AT command to none of 6 port I have from dmesg)
cu -l /dev/cuaU0.1 to cu -l /dev/cuaU0.5 - just HANG after connection, with prompt CONNECTEDat OK AT!ENTERCND="A710" OK AT!PCINFO? State: 0 (LPM) LPM force flags - W_DISABLE:1, User:1, Temp:0, Volt:0, Auth:0 W_DISABLE: 1 Poweroff mode: 0 LPM Persistent: 0 OK AT!PCFCCAUTH? NV setting: 0 Auth enabled: 0 Lock state: 0 OK AT!UDINFO? VID: 0x1199 PID: 0x68A3 Interface: DIP Manufacturer: Sierra Wireless, Incorporated Product: MC7710 OK AT!UDPID=? 68A3 68AA 68A2 68B1 68A9 OK AT!UDUSBCOMP? !UDUSBCOMP: 3 OK AT!UDUSBCOMP=? 0 - HIP DM NMEA AT MDM1 MDM2 MDM3 MS SUPPORTED 1 - HIP DM NMEA AT MDM1 MS NOT SUPPORTED 2 - HIP DM NMEA AT NIC1 MS SUPPORTED 3 - HIP DM NMEA AT MDM1 NIC1 MS SUPPORTED 4 - HIP DM NMEA AT NIC1 NIC2 NIC3 MS SUPPORTED 5 - HIP DM NMEA AT ECM1 MS SUPPORTED 6 - DM NMEA AT QMI NOT SUPPORTED 7 - DM NMEA AT RMNET1 RMNET2 RMNET3 NOT SUPPORTED 8 - DM NMEA AT MBIM NOT SUPPORTED 9 - MBIM NOT SUPPORTED 10 - NMEA MBIM NOT SUPPORTED 11 - DM MBIM NOT SUPPORTED 12 - DM NMEA MBIM NOT SUPPORTED 13 - Config1: comp6 Config2: comp8 NOT SUPPORTED 14 - Config1: comp6 Config2: comp9 NOT SUPPORTED 15 - Config1: comp6 Config2: comp10 NOT SUPPORTED 16 - Config1: comp6 Config2: comp11 NOT SUPPORTED 17 - Config1: comp6 Config2: comp12 NOT SUPPORTED 18 - Config1: comp7 Config2: comp8 NOT SUPPORTED 19 - Config1: comp7 Config2: comp9 NOT SUPPORTED 20 - Config1: comp7 Config2: comp10 NOT SUPPORTED 21 - Config1: comp7 Config2: comp11 NOT SUPPORTED 22 - Config1: comp7 Config2: comp12 NOT SUPPORTED -
Are you using the correct serial speed/modes?
-
Not sure, what value is correct for this MC7710 with PFSense,
Basically the default value 9600 for cu on this Alix Board works fine with Ericsson 2XGNJ
I can also connect to this MC7710 AT serial port on Windows with 9600.
-
Back with update after Christmas.
- MPD is talking with ppp on 115200 by default
- Problem with AT on serial is result of "somehow locked serial bus", (I have no idea why it occurs on this ALIX 6f2) - but the only way to back it to live is take down power from MC7710 module and power up it again.
usbconfig -d 1.2 power_off
usbconfig -d 1.2 power_onOr You can try "blind AT command"
AT!RESETThe best way is turn off (unplug power cord) whole device.
In my case modem for ppp presents on /dev/cuaU0.3[opt1_link0] MODEM: Fail to open serial port /dev/cuaU0.3 on speed 115200 Jan 2 12:54:22 ppp [opt1_link0] Link: DOWN event Jan 2 12:54:22 ppp [opt1_link0] LCP: Down event Jan 2 12:54:22 ppp [opt1_link0] Link: reconnection attempt 11 in 3 seconds Jan 2 12:54:25 ppp [opt1_link0] Link: reconnection attempt 11 Jan 2 12:54:25 ppp [opt1_link0] CHAT: Detected Hayes compatible modem. Jan 2 12:54:28 ppp [opt1_link0] CHAT: The modem is not responding to "AT&F&C1&D2E0S0=0M1" at ModemCmd: label. Jan 2 12:54:28 ppp [opt1_link0] MODEM: chat script failed Jan 2 12:54:28 ppp [opt1_link0] Link: DOWN event Jan 2 12:54:28 ppp [opt1_link0] LCP: Down event Jan 2 12:54:28 ppp [opt1_link0] Link: reconnection attempt 12 in 2 seconds Jan 2 12:54:30 ppp [opt1_link0] Link: reconnection attempt 12 Jan 2 12:54:31 ppp [opt1_link0] CHAT: Detected Hayes compatible modem. Jan 2 12:54:31 ppp [opt1_link0] CHAT: Dialing server at *99#... Jan 2 12:54:31 ppp [opt1_link0] CHAT: ATDT*99# Jan 2 12:54:31 ppp [opt1_link0] CHAT: Connected at 100000000. Jan 2 12:54:31 ppp [opt1_link0] MODEM: chat script succeeded Jan 2 12:54:31 ppp [opt1_link0] Link: UP event Jan 2 12:54:31 ppp [opt1_link0] LCP: Up event Jan 2 12:54:31 ppp [opt1_link0] LCP: state change Starting --> Req-Sent Jan 2 12:54:31 ppp [opt1_link0] LCP: SendConfigReq #3 Jan 2 12:54:31 ppp [opt1_link0] ACFCOMP Jan 2 12:54:31 ppp [opt1_link0] PROTOCOMP Jan 2 12:54:31 ppp [opt1_link0] ACCMAP 0x000a0000 Jan 2 12:54:31 ppp [opt1_link0] MRU 1500 Jan 2 12:54:31 ppp [opt1_link0] MAGICNUM 0x863c1dc0 Jan 2 12:54:31 ppp [opt1_link0] LCP: rec'd Configure Request #6 (Req-Sent) Jan 2 12:54:31 ppp [opt1_link0] ACCMAP 0x00000000 Jan 2 12:54:31 ppp [opt1_link0] AUTHPROTO CHAP MD5 Jan 2 12:54:31 ppp [opt1_link0] MAGICNUM 0x14e36fb8 Jan 2 12:54:31 ppp [opt1_link0] PROTOCOMP Jan 2 12:54:31 ppp [opt1_link0] ACFCOMP Jan 2 12:54:31 ppp [opt1_link0] LCP: SendConfigAck #6 Jan 2 12:54:31 ppp [opt1_link0] ACCMAP 0x00000000 Jan 2 12:54:31 ppp [opt1_link0] AUTHPROTO CHAP MD5 Jan 2 12:54:31 ppp [opt1_link0] MAGICNUM 0x14e36fb8 Jan 2 12:54:31 ppp [opt1_link0] PROTOCOMP Jan 2 12:54:31 ppp [opt1_link0] ACFCOMP Jan 2 12:54:31 ppp [opt1_link0] LCP: state change Req-Sent --> Ack-Sent Jan 2 12:54:31 ppp [opt1_link0] LCP: rec'd Configure Ack #3 (Ack-Sent) Jan 2 12:54:31 ppp [opt1_link0] ACFCOMP Jan 2 12:54:31 ppp [opt1_link0] PROTOCOMP Jan 2 12:54:31 ppp [opt1_link0] ACCMAP 0x000a0000 Jan 2 12:54:31 ppp [opt1_link0] MRU 1500 Jan 2 12:54:31 ppp [opt1_link0] MAGICNUM 0x863c1dc0 Jan 2 12:54:31 ppp [opt1_link0] LCP: state change Ack-Sent --> Opened Jan 2 12:54:31 ppp [opt1_link0] LCP: auth: peer wants CHAP, I want nothing Jan 2 12:54:31 ppp [opt1_link0] LCP: LayerUp Jan 2 12:54:31 ppp [opt1_link0] LCP: rec'd Discard Request #7 (Opened) Jan 2 12:54:31 ppp [opt1_link0] CHAP: rec'd CHALLENGE #1 len: 35 Jan 2 12:54:31 ppp [opt1_link0] Name: "UMTS_CHAP_SRVR" Jan 2 12:54:31 ppp [opt1_link0] CHAP: Using authname "user" Jan 2 12:54:31 ppp [opt1_link0] CHAP: sending RESPONSE #1 len: 25 Jan 2 12:54:31 ppp [opt1_link0] CHAP: rec'd SUCCESS #1 len: 4 Jan 2 12:54:31 ppp [opt1_link0] LCP: authorization successful Jan 2 12:54:31 ppp [opt1_link0] Link: Matched action 'bundle "opt1" ""' Jan 2 12:54:31 ppp [opt1_link0] Link: Join bundle "opt1" Jan 2 12:54:31 ppp [opt1] Bundle: Status update: up 1 link, total bandwidth 100000000 bps Jan 2 12:54:31 ppp [opt1] IPCP: Open event Jan 2 12:54:31 ppp [opt1] IPCP: state change Initial --> Starting Jan 2 12:54:31 ppp [opt1] IPCP: LayerStart Jan 2 12:54:31 ppp [opt1] IPV6CP: Open event Jan 2 12:54:31 ppp [opt1] IPV6CP: state change Initial --> Starting Jan 2 12:54:31 ppp [opt1] IPV6CP: LayerStart Jan 2 12:54:31 ppp [opt1] IPCP: Up event Jan 2 12:54:31 ppp [opt1] IPCP: state change Starting --> Req-Sent Jan 2 12:54:31 ppp [opt1] IPCP: SendConfigReq #9 Jan 2 12:54:31 ppp [opt1] IPADDR 0.0.0.0 Jan 2 12:54:31 ppp [opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Jan 2 12:54:31 ppp [opt1] PRIDNS 0.0.0.0 Jan 2 12:54:31 ppp [opt1] SECDNS 0.0.0.0 Jan 2 12:54:31 ppp [opt1] IPV6CP: Up event Jan 2 12:54:31 ppp [opt1] IPV6CP: state change Starting --> Req-Sent Jan 2 12:54:31 ppp [opt1] IPV6CP: SendConfigReq #21 Jan 2 12:54:31 ppp [opt1] IPCP: rec'd Configure Request #2 (Req-Sent) Jan 2 12:54:31 ppp [opt1] IPCP: SendConfigAck #2 Jan 2 12:54:31 ppp [opt1] IPCP: state change Req-Sent --> Ack-Sent Jan 2 12:54:31 ppp [opt1] IPCP: rec'd Configure Reject #9 (Ack-Sent) Jan 2 12:54:31 ppp [opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Jan 2 12:54:31 ppp [opt1] IPCP: SendConfigReq #10 Jan 2 12:54:31 ppp [opt1] IPADDR 0.0.0.0 Jan 2 12:54:31 ppp [opt1] PRIDNS 0.0.0.0 Jan 2 12:54:31 ppp [opt1] SECDNS 0.0.0.0 Jan 2 12:54:31 ppp [opt1] IPCP: rec'd Configure Nak #10 (Ack-Sent) Jan 2 12:54:31 ppp [opt1] IPADDR IP_REMOVED Jan 2 12:54:31 ppp [opt1] CHANGE is OK Jan 2 12:54:31 ppp [opt1] PRIDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] SECDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] IPCP: SendConfigReq #11 Jan 2 12:54:31 ppp [opt1] IPADDR IP_REMOVED Jan 2 12:54:31 ppp [opt1] PRIDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] SECDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] IPCP: rec'd Configure Ack #11 (Ack-Sent) Jan 2 12:54:31 ppp [opt1] IPADDR IP_REMOVED Jan 2 12:54:31 ppp [opt1] PRIDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] SECDNS IP_REMOVED Jan 2 12:54:31 ppp [opt1] IPCP: state change Ack-Sent --> Opened Jan 2 12:54:31 ppp [opt1] IPCP: LayerUp Jan 2 12:54:31 ppp [opt1] IP_REMOVED -> GW_IP_REMOVED Jan 2 12:54:32 ppp [opt1] IFACE: Up event Jan 2 12:54:32 ppp [opt1] IFACE: Rename interface ng0 to ppp0 Jan 2 12:54:33 ppp [opt1] IPV6CP: SendConfigReq #22 Jan 2 12:54:35 ppp [opt1] IPV6CP: SendConfigReq #23 Jan 2 12:54:37 ppp [opt1] IPV6CP: SendConfigReq #24 Jan 2 12:54:39 ppp [opt1] IPV6CP: SendConfigReq #25 Jan 2 12:54:41 ppp [opt1] IPV6CP: SendConfigReq #26 Jan 2 12:54:43 ppp [opt1] IPV6CP: SendConfigReq #27 Jan 2 12:54:45 ppp [opt1] IPV6CP: SendConfigReq #28 Jan 2 12:54:47 ppp [opt1] IPV6CP: SendConfigReq #29 Jan 2 12:54:49 ppp [opt1] IPV6CP: SendConfigReq #30 Jan 2 12:54:51 ppp [opt1] IPV6CP: parameter negotiation failed Jan 2 12:54:51 ppp [opt1] IPV6CP: state change Req-Sent --> Stopped Jan 2 12:54:51 ppp [opt1] IPV6CP: LayerFinish -
Now it looks good.
FYI it is good to check, bands used by Your Provider.For example:
T-Mobile drops you down to worse band on traffic idle.For me the best is B3 and B20 (so I stick to it)
B7 sucks (so I exclude it from AT!BAND)AT!GSTATUS?
!GSTATUS:
Current Time: 20815 Temperature: 40
Bootup Time: 20762 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B3 LTE bw: 15 MHz
LTE Rx chan: 1798 LTE Tx chan: 19798
EMM state: Registered Normal Service
EMM connection:RRC IdleRSSI (dBm): -52 Tx Power: 0
RSRP (dBm): -79 TAC: xxx
RSRQ (dB): -12 Cell ID: xxx
SINR (dB): 20.8BTW
I assume that module for usie (ethernet device) is not compiled into NanoBSD kernel ?, am I right ?
How does it look like on full Pfsense install ?Lack of qmi on FreeBSD makes me unhappy :-(
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.