Firmware and Packages
-
Hello!
My firewall is on:
Current Base System 2.3.4_1
Latest Base System 2.3.4_1
StatusUp to date.Is this really the last firmware? My feel is, that the update function is not working correctly, as I also can not list or update the packages. The error message is:
Packages
×
Unable to retrieve package information.Any ideas?
-
32 bit hardware by any chance?
-
-
Go to System / Update / Update Settings change it to anything else, save
Change it to "Legacy Stable" or "Latest Stable", save
This might fix it. -
Go to System / Update / Update Settings change it to anything else, save
Change it to "Legacy Stable" or "Latest Stable", save
This might fix it.No change.
The menu opens, but the 3 fields are simply blank. I have tried everyone with save and search for updatesNo difference
-
Go to System / Update / Update Settings change it to anything else, save
Change it to "Legacy Stable" or "Latest Stable", save
This might fix it.No change.
The menu opens, but the 3 fields are simply blank. I have tried everyone with save and search for updatesNo difference
any ideas?
Since this problem start, I have also on a regular base this information on the start screen:Filter Reload
There were error(s) loading the rules: no IP address found for ESTABLISHED:ESTABLISHED - The line in question reads [0]: @ 2017-11-16 21:12:00
There were error(s) loading the rules: no IP address found for ESTABLISHED:ESTABLISHED - The line in question reads [0]: @ 2017-11-16 22:13:50 -
Mine was saying that to me as well, when I knew there was a 2.4.1 available.
I rebooted the firewall and then 2.4.2 showed up.
Something was blocking it from checking properly. -
Can someone post, what is the destination and port for the check?
My firewall is still on:
Current Base System 2.3.4_1
Latest Base System 2.3.4_1
StatusUp to date. -
Any ideas here?
Also when I connect with ssh and try to upgrade it on shell, its not working. I will simply come back to the main menu
-
Still same issue here.
Also over SSH is no upgrade possible
Vendor: coreboot
Version: SageBios_PCEngines_APU-45
Release Date: 04/05/2014
Version 2.3.4-RELEASE-p1 (amd64)
built on Fri Jul 14 14:52:43 CDT 2017
FreeBSD 10.3-RELEASE-p19The system is on the latest version.
-
Just do a fresh install with config recovery.
-
Is there any other option? I m afraid to reset this box.
What can I try?
-
What can I try?
Do the quick and sure thing.
Save settings, and re install with latest version. -
When I use the backup/recovery option, is there everything included?
Also the package config?What is missing?
thanks