Ipsec Asa Vpn

[juanelop]

Hello community,

I hope you can help me with this problem, I have already configured the ipsec tunnel Asa, PFsense –-- to --- Cisco Firewall

these are my encryption phases:

ike = 3des-sha1-modp1536 #Phase 1: modp1536 = DH group 5
        esp = 3des-md5-modp1024 #Phase 2

PFsense ip side public = X.X.X.X------------------------------ Cisco Firewall ip public = X.X.X.X
  subnet = 192.168.105.0 / 24                                      subnet = XX.XXX.236.126 / 32    <------192.168.16.109

As I mention the tunnel is already established, but to be able to access the subnet of Cisco XX.XXX.236.126/32, I have to make a nat with this ip that I was assigned ---> 192.168.16.109

You can guide me a little so that my subnet 192.168.105.0/24 consumes the services of 10.225.236.126 through 192.168.16.109

Greetings.

Pablo I.G.

[Derelict]

From your "diagram", they are the ones who have to NAT.

What is the IPsec access list on the ASA side?

What is the phase 2 defined on your side (including any NAT if present there) ?