Multiple WAN to multiple LAN

zlati

Hello,

I have 4 ISP's with BGP, each ISP have 1Gbps guaranteed(contract). Now i know that the server that is installed PFSense have 1Gbps ports, how i can use the full speed from all ISP's ?
I have added to the PFSense server another network card with 4 x 1Gbps ports. And i have link that ports with my switch(Cat 7 cables), but how i can direct traffic to all that ports ? not only the LAN port to use the full speed of ISPs, not only 1Gbps. Also to be able to use failover and load balance if it's possible.

PS: Sorry for my english

heper

https://doc.pfsense.org/index.php/Multi-WAN

zlati

that guide it's not answering my question…

zlati

I want to create something like this:

We have 4 BGPs.
We have ISP interfaces :

ISP 1 (1Gbps) - WAN1
ISP 2 (1Gbps) - WAN2
ISP 3 (1Gbps) - WAN3
ISP 4 (1Gbps) - WAN4

and lan interfaces that are going from PFSense to switch:

PFSense LAN1 -> Switch Port 1
PFSense LAN2 -> Switch Port 2
PFSense LAN3 -> Switch Port 3
PFSense LAN4 -> Switch Port 4

We have a public class x.x.x.x/24 that it's setup on LAN1

How can i make this configuration ? :
WAN1 -> LAN1 , LAN2 , LAN3, LAN4
WAN2 -> LAN1 , LAN2 , LAN3, LAN4
WAN3 -> LAN1 , LAN2 , LAN3, LAN4
WAN4 -> LAN1 , LAN2 , LAN3, LAN4

Because if im using only:
WAN1 -> LAN1
WAN2 -> LAN1
WAN3 -> LAN1
WAN4 -> LAN1

Then we have only 1Gbps not 4Gbps that i have from providers because of port limit 1Gbps port.
And i wanna have load balance and failover. :o

dusan

You may want to look at this:

https://forum.pfsense.org/index.php?topic=145576.0

heper

why doesnt that document anwer your question?
what doesn't it answer?

try explaining your problem better. someone will try to answer if it is crystal clear what you intend to do

maikcat

why dont you use LAGG on lan interfaces?