Need advanced technical information - Gold member?
-
Hello Muppet.
Appreciate the message.I already have some good skills with freebsd, but it happens that pfsense has some "different" scripts to generate packages and kernel, and that's the point I need support. I got stuck in the kernel process. I'm ok with all the other steps like ports, iso, etc.
I'm ok paying and supporting pfsense dev teams for that.
Absolutely no problems.Thanks.
Fabricio. -
Sorry, purchasing support won't get the help you require. We don't provide engineering or development support to outside parties as we're too busy with our own development. Thanks.
-
Hi Ivor,
Thanks for the message.
I totally understand it. Unfortunately pfsense doesn't support an LCD display I have developed based on Arduino.
I have to manually add drivers and changes to the loader.conf after installation.
I want to embed the driver to the base install.
Any chance to have uchcom enabled to pfsense?Thanks.
Fabricio. -
Couldn't something like that just be a package?
-
Hi Johnpoz.
Thanks for the message.
Well, I really think you have a point here.
I didn't think (yet) about a package to work as a "patch" and add the drivers and config files.
That really got my attention now.
Thanks much. You made my day.Fabricio.
-
You probably want to start with this package:
LCDproc 0.10.5 LCD display driver.
Package Dependencies:
lcdproc-0.5.7_2 -
Hi Derelict,
You're correct. I'm using the lcdproc package with matrix orbital.
It happens that I have developed my own lcd hardware with Arduino, but pfsense doesn't recognize it automatically.
I have to add the uchcom file and enable it on loader.conf. That way it works perfectly. I will work on it with the package.
Thanks much!Fabricio.
-
Why do you need Arduino, we are talking about a character (not graphical) LCD right? What is it that LCDproc + MO not doing for you? Curious.
-
Hello SammyWoo,
Yes. It's a character LCD with an Arduino nano board + USB.
I Have used a "generic" matrix orbital driver source code on arduino. When you connect it to Freebsd/pfSense, the Arduino board is recognized by the uchcom driver which is not installed on pfsense. What I'm doing is, taking the uchcom.ko file from a full Freebsd 11 install, copy it to /boot/kernel and enable it on /boot/loader.conf with: uchcom_load="YES" by the end of the file. What I want to do is, to install uchcom support during the pfsense installation or during the package installation. (Package will be easier). That's it.Regards,
Fabricio. -
You should really open a redmine feature request for this if there isn't one open already. (https://redmine.pfsense.org/)
It looks like a relatively well established driver so it may be possible to add it without much issue. Or have it included in /kernel maybe. I am not a developer though…
When loading it at boot you should use the file /boot/loader.conf.local as that wonlt be overwritten at a firmware update etc.
Steve
-
Hello SammyWoo,
Yes. It's a character LCD with an Arduino nano board + USB.
I Have used a "generic" matrix orbital driver source code on arduino. When you connect it to Freebsd/pfSense, the Arduino board is recognized by the uchcom driver which is not installed on pfsense. What I'm doing is, taking the uchcom.ko file from a full Freebsd 11 install, copy it to /boot/kernel and enable it on /boot/loader.conf with: uchcom_load="YES" by the end of the file. What I want to do is, to install uchcom support during the pfsense installation or during the package installation. (Package will be easier). That's it.Regards,
Fabricio.Sounds like you have something interesting brewing. Please do tell more when you have it working! :)
-
Hi Stephenw10,
Sure thing. Will do it for sure!Appreciate the message.
Fabricio.
