[Solved] Installing NanoBSD 2.3.5 on WatchGuard X700 error
-
I am getting this error over and over:
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Retrying command ata0: DMA limited to UDMA33, controller found non-ATA66 cable (ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 af 1f 3c 40 00 00 00 00 01 00 (ada0:ata0:0:0:0): CAM status: Command timeout (ada0:ata0:0:0:0): Error 5, Retries exhausted ata0: DMA limited to UDMA33, controller found non-ATA66 cable
Any suggestions?
-
Never mind, found the solution.
https://forum.pfsense.org/index.php?topic=23903.0
-
Check: https://doc.pfsense.org/index.php/Boot_Troubleshooting
-
https://doc.pfsense.org/index.php/PfSense_on_Watchguard_Firebox