RuleError:There were errors loading the rules: /tmp/rules.debug:18: cannot alloc

barbarin

I have the same problem on 4 pfsense servers, yesterday reinstall one and today 3 more shows the errors!!!! I suspect it's a hacking problem….

Any can help us??

Thanks.

jahonix

That's not a hacking problem, it's an upgrade glitch.
Several others reported this already so watch the forum and read what other threads come up with.

Derelict

Not hacking ffs.

Do a forum search.

Increase the Firewall Maximum Table Entries size to 400000 in System > Advanced, Firewall & NAT

barbarin

Thanks Derelict, I make a search but don´t see the answer, sorry for that…

Again thanks to all.

Greetings...

KOM

Not hacking ffs.

No, I'm pretty sure it's hacking. It's always hacking. ;D

toms88

Thanks all, il give that a try and see if it helps.

kyawwinhtun

@Derelict:

Not hacking ffs.

Do a forum search.

Increase the Firewall Maximum Table Entries size to 400000 in System > Advanced, Firewall & NAT

It Works Well!!!!!!Thanks :D

csandoval012

mine is on default
Maximum number of connections to hold in the firewall state table.
Note: Leave this blank for the default. On this system the default size is: 4909000

should I put more than that?

Derelict

It is not the Firewall Maximum States entry it is the Firewall Maximum Table Entries setting. Set it to 400000.

eddie4

Jeej fixed my problem!!!!

Floppie

@Derelict:

Not hacking ffs.

Do a forum search.

Increase the Firewall Maximum Table Entries size to 400000 in System > Advanced, Firewall & NAT

This solved it for me after losing NAT port forwarding during a reboot this morning. Thanks!

irfanit02gmail.com

@Derelict:

Not hacking ffs.

Do a forum search.

Increase the Firewall Maximum Table Entries size to 400000 in System > Advanced, Firewall & NAT

=================================

Post increasing the Firewall Maximum Table Entries size to 400000 , all rules started working.. Thanks buddy.. i helped a lot..

itlogicsystems

Thanks so much for the input! the changing of the 'max table entries' size to 400k did the trick!!

aagaag

Just wanted to say that I got the same message today, although my system says that its default is 6 million entries.

Derelict

Set it to 400000.

DrRobe

Worked perfectly, thank you!

Bon Jovi

@derelict hello, i have set it in 400000 and even don't work. Can you suggest any other solution, please?

jimp

Use a bigger number. Try 2000000.

If you have a lot of table entries (especially with pfBlockerNG) you might need that or more.

Derelict

And be sure you're changing the right value. People, for some reason, seem to confuse Maximum States and Maximum Table Entries. Maximum Table Entries is what you want to change here.

Khampol

ok that works !
ps : if i put it to 500000 ? is there any pb ?