Install pfsense on a server
-
If you don't have physical access to the server you must have some way of connecting to it.
You can probably install via IPMI or some equivalent. You will need some sort of console access to install in the normal way though.
If you can image a drive on it directly you might be able to install on a local machine then image that drive and export that to the server. It would need to have the same NIC drivers to come up with valid intercaces.
What access do you have?
Steve
-
why all this malice in your answer.
I'm out. Have a nice day!
-
If you don't have physical access to the server you must have some way of connecting to it.
You can probably install via IPMI or some equivalent. You will need some sort of console access to install in the normal way though.
If you can image a drive on it directly you might be able to install on a local machine then image that drive and export that to the server. It would need to have the same NIC drivers to come up with valid intercaces.
What access do you have?
Steve
I can access the datacenter, I have my pfsense on a USB bootable, is there a USB port on a server? so the installation will be the same thing as on a normal computer? and how can I do my configuration since there is no screen?
the questions may seem stupid but I am a new trainee in this company and I am trying to learn :)
-
Find an old PC with two LAN ports and have a play on your desk, it will be much easier.
-
Your server will have some sort of console ports. probably USB/VGA or USB/HDMI or serial console. Or all of those. ;)
If you're using a serial console connection use the USB serial image.
It probably also has some sort of out of band access like IPMI you could use to connect to a console remotely. That has to have been configured though. And you need to know how to access it.
Steve
-
There is no such thing as a human-less data center, if you contract with AWS, there is an Amazon employee who can plug in your USB. Is this one of those hypothetical classroom questions?
But u got a bigger problem, u need physical console/kbd access.
-
… is there a USB port on a server? ...
Candid camera?
It may or it may not have a USB port. You should know better how it is configured or if in doubt have a look.
All a forum member can do without knowledge of your server's brand and model (you never mentioned that, did you) is to say: maybe. -
…and how can I do my configuration since there is no screen?
Anyone remembers punchcards?
-
If you can install pfSense from punch cards there should be some special award created. ;D
@bisssane Since you say you have physical access to the server there should be no real issue here. It's just a matter of familiarising yourself with the console options on your hardware.
Steve
-
-
If you can install …
Sorry, then I'm not legit for the price. Was about configuration only.
SCNR -
Ha. I think the award could go to any use of punch cards. Other than, like, stacking under one corner to level your box! ;)
Steve
-
I've got a whole box of punch cards :-[
They were very handy for levelling the billiard table.
