Ports will not open
-
Post up a screen of your WAN firewall rules. Maybe the NAT definition didn't autocreate the rule.
-
Yes, we can't see if you have the port forward set to add a firewall rule automatically.
Also we can't see the title bar so can't see if there are any alerts shown. If there are and they are showing unable to load the v6 bogons table then you may not be loading the new rules because of it.
See: https://forum.pfsense.org/index.php?topic=145990.0That should be fixed in 2.4.3_1 though.
Steve
-
@KOM:
Post up a screen of your WAN firewall rules. Maybe the NAT definition didn't autocreate the rule.
ive changed the ports to 40000-41000
but here is the screenshot
.png)
.png_thumb) -
Yes, we can't see if you have the port forward set to add a firewall rule automatically.
Also we can't see the title bar so can't see if there are any alerts shown. If there are and they are showing unable to load the v6 bogons table then you may not be loading the new rules because of it.
See: https://forum.pfsense.org/index.php?topic=145990.0That should be fixed in 2.4.3_1 though.
Steve
Was already on 60000
.png)
.png_thumb) -
Post your WAN firewall rules, not your NAT rules. Firewall - Rules - WAN.
-
@KOM:
Post your WAN firewall rules, not your NAT rules. Firewall - Rules - WAN.
Sorry
.png)
.png_thumb) -
Looks good to me.
Next guess, is your WAN on private network space, eg. 192.168.x.x? If so, you must uncheck the Block private networks option on WAN or it will reject all RFC1918 traffic before it hits your NAT rule.
-
@KOM:
Looks good to me.
Next guess, is your WAN on private network space, eg. 192.168.x.x? If so, you must uncheck the Block private networks option on WAN or it will reject all RFC1918 traffic before it hits your NAT rule.
My wan come from my virgin media modem just gives me a an ip to pfsense is this what you mean KOM? it gives 82.x.x.x.
-
OK, that's not it.
Post a screen of your firewall logs (with public details masked) that shows all activity during your test? Do any other NATs work for you?
-
There is >1GB that's been passed by that rule. If it's not hitting the server that a lot of unanswered requests!
You have changed from port 60000-61000 to 40000-41000, that's intentional?
In the first screenshot your client is setup for only one incoming port, 60000, not a range. Has that changed?
Block private networks will only ever block traffic sourced from a private network. Even if your WAN address is a provate IP (which it isn't) it will only block requests from other hosts in the WAN subnet, which could be legitimate.
Steve
-
@KOM:
OK, that's not it.
Post a screen of your firewall logs (with public details masked) that shows all activity during your test? Do any other NATs work for you?
Think this is the correct log
.png)
.png_thumb) -
Right, so your fiirewall rules are passing port 40000. But incoming traffic is on port 60000.
Steve
-
There is >1GB that's been passed by that rule. If it's not hitting the server that a lot of unanswered requests!
What does that mean sorry?
You have changed from port 60000-61000 to 40000-41000, that's intentional?
In the first screenshot your client is setup for only one incoming port, 60000, not a range. Has that changed?
Yea it was on 40000-41000 a few days ago so I changed it back to what it was before
@stephenw10:Block private networks will only ever block traffic sourced from a private network. Even if your WAN address is a provate IP (which it isn't) it will only block requests from other hosts in the WAN subnet, which could be legitimate.
Steve
I have no idea what that means Steve sorry im very new to all this and think im in way way to deep trying to get all this working
-
Right, so your fiirewall rules are passing port 40000. But incoming traffic is on port 60000.
Steve
I think the 60000 is just because the torrents was running on that port and a few are still trying to connect.
-
On the WAN firewall rules page the 'States' column shows how much traffic has been passed by states opened by that rule. Yours shows the ~1GB has been passed so traffic is hitting that rule and being passed as expected.
It looks like you changed the port forward back to 40000-41000 but the client is still sending port 60000 or other clients out there are still trying to access it on that port at least.
You can leave the block private networks rule it's not causing a problem.
So what exactly is not working right now?
Steve
-
On the WAN firewall rules page the 'States' column shows how much traffic has been passed by states opened by that rule. Yours shows the ~1GB has been passed so traffic is hitting that rule and being passed as expected.
It looks like you changed the port forward back to 40000-41000 but the client is still sending port 60000 or other clients out there are still trying to access it on that port at least.
You can leave the block private networks rule it's not causing a problem.
So what exactly is not working right now?
Steve
whats not working? loads lol
https://forum.pfsense.org/index.php?topic=146285.msg803597#msg803597
https://forum.pfsense.org/index.php?topic=147982.0and posts 40000-41000 will not open
They open fine on 10.0.0.1 but everything on this 10.0.1.1 is not working and nothing but trouble
-
Ok but what makes you think ports 40k-41k are not open?
They look to be open to me.
Steve
-
the test on deluge reports not open, never done that before.
-
For all 1000 ports? Can we see the result?
Steve
-
For all 1000 ports? Can we see the result?
Steve
All I see is the yellow ! and not a green dot Steve
https://forum.pfsense.org/index.php?action=dlattach;topic=147958.0;attach=118139;image
