Ports will not open
-
On the WAN firewall rules page the 'States' column shows how much traffic has been passed by states opened by that rule. Yours shows the ~1GB has been passed so traffic is hitting that rule and being passed as expected.
It looks like you changed the port forward back to 40000-41000 but the client is still sending port 60000 or other clients out there are still trying to access it on that port at least.
You can leave the block private networks rule it's not causing a problem.
So what exactly is not working right now?
Steve
-
On the WAN firewall rules page the 'States' column shows how much traffic has been passed by states opened by that rule. Yours shows the ~1GB has been passed so traffic is hitting that rule and being passed as expected.
It looks like you changed the port forward back to 40000-41000 but the client is still sending port 60000 or other clients out there are still trying to access it on that port at least.
You can leave the block private networks rule it's not causing a problem.
So what exactly is not working right now?
Steve
whats not working? loads lol
https://forum.pfsense.org/index.php?topic=146285.msg803597#msg803597
https://forum.pfsense.org/index.php?topic=147982.0and posts 40000-41000 will not open
They open fine on 10.0.0.1 but everything on this 10.0.1.1 is not working and nothing but trouble
-
Ok but what makes you think ports 40k-41k are not open?
They look to be open to me.
Steve
-
the test on deluge reports not open, never done that before.
-
For all 1000 ports? Can we see the result?
Steve
-
For all 1000 ports? Can we see the result?
Steve
All I see is the yellow ! and not a green dot Steve
https://forum.pfsense.org/index.php?action=dlattach;topic=147958.0;attach=118139;image -
@Darkvodka34:
the test on deluge reports not open, never done that before.
That test is probably crap, trying to connect to those ports via the LAN interface. You need to test from the WAN. Read here: https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting
-
@Darkvodka34:
the test on deluge reports not open, never done that before.
That test is probably crap, trying to connect to those ports via the LAN interface. You need to test from the WAN. Read here: https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting
I have read that page and done it before which works fine and deluge says it works fine. only thing new is this new gateway (10.0.1.1)
If I add th server back on the default gateway 10.0.0.1 and just change the IP on the nat rule deluge passes it as worked and my speed goes up, I put it back on 10.0.1.1 and just the nat ip again fails and speed goes down. -
@Darkvodka34:
only thing new is this new gateway (10.0.1.1)
New gateway? You mean an additional LAN network? I guess it's time you post screenshots from your complete interface and firewall setup.
-
Why are you forwarding 1000 ports but only have the torrent client listening on 1?
And that screenshot still shows the wrong port for the current forwarded range. I assume you have updated that?
Steve
