Same gateway over 4 nics
-
I use Linksys 308p switches as I run 7 vlans and require POE for my access-point.
https://www.broadbandbuyer.com/products/18413-linksys-lgs308p-uk/
Check the devices supports IEEE 802.3ad LACP, there will be cheaper than I have.
There are loads of posts on the forum asking for switch recommendations.
Thanks ill have a look for one.
will the 3 nics in my server not support IEEE 802.3ad LACP than?
-
@Darkvodka34:
I use Linksys 308p switches as I run 7 vlans and require POE for my access-point.
https://www.broadbandbuyer.com/products/18413-linksys-lgs308p-uk/
Check the devices supports IEEE 802.3ad LACP, there will be cheaper than I have.
There are loads of posts on the forum asking for switch recommendations.
will the 3 nics in my server not support IEEE 802.3ad LACP than?
Not a clue sorry as I don't use OMV, but looking in the documentation it does mention LACP, but do you have a good reason to even use it.
Even viewing Blu Ray 1080p mkv files you'd get nowhere near 1Gbps.
http://openmediavault.readthedocs.io/en/latest/administration/general/network.html?highlight=LACP%5C
-
Well after spending alot of money upgrade to cat 7 and trying this out is all to my packet loss.
https://forum.pfsense.org/index.php?topic=146285.msg803597#msg803597Just trying to get it working.
edit sorry yes I did bond on OMV dos say it works on 802.3ad.
-
@Darkvodka34:
Well after spending alot of money upgrade to cat 7 and trying this out is all to my packet loss.
You can't fix packet loss on the WAN interface by upgrading your LAN. You really need to learn the basics of networking,
-
@Darkvodka34:
Well after spending alot of money upgrade to cat 7 and trying this out is all to my packet loss.
You can't fix packet loss on the WAN interface by upgrading your LAN. You really need to learn the basics of networking,
I thought it would be bottlenecking pfsense with all the connections. it only happends when that server is on.
-
The packet loss will be WAN side, I'd bet money on it!
Since you have torrents running there it probably just traffic fro9m the server saturating the WAN connection. Some traffic shaping could probably help there.
Steve
-
The packet loss will be WAN side, I'd bet money on it!
Since you have torrents running there it probably just traffic fro9m the server saturating the WAN connection. Some traffic shaping could probably help there.
Steve
I did the traffic shaping wizard not nothing at all worked well packet loss was higher
-
@Darkvodka34:
I did the traffic shaping wizard not nothing at all worked well packet loss was higher
The wizards sets up the basics, you have to manually configure/tune the shapers/rules to match your use-case. Traffic shaping is not something you can setup in 5 Minutes and be done with it.
-
do cheap routers do all this auto? I mean the £15 router I bought last year seems to fix all the problems. Pfsense tho as addons which I love.
-
Well after spending alot of money upgrade to cat 7
CAT 7 won't do much. Gb is designed to work over CAT5 cable, though CAT6 is often used.