Unofficial E2guardian package for pfSense

ravegen

like I said, i followed your youtube video but in the end, i got error, that is why i asked you if you have preinstalled CA in your browser.

ucribrahim

Hi marcello,

I need help so much or advice. I want to use different blacklist not shallalist. So the blacklist that I use, it has same structure as shallalist. I try to download the blacklist but I get this error " E2guardian - Could not determine Blacklist extract dir. Categories not updated ". I searched so many times and tried so many ways to get it work. But I couldn't make the my blacklist work.

Shallalist working well, but I need use different blacklist as I said above. I put the blacklist categories into the /usr/local/etc/e2guardian/lists/blacklists or BL directory. But when I go to E2guardian > Site Lists > create a new one and I still see the old shallalist categories. I can't see new categories.

The problem is seeing old shallalist categories.

Please I need some advice. Thanks.

marcelloc

Can you check the directory structure of both lists extracting the compressed list file?

susamlicubuk

Marcello
Sometimes we are having problems with uninstall / reinstall
the way to completely delete old configuration settings
How to clean install e2Guardian lines in config.xml?

is there progress in blocking file extension
file extension blocking is not working.

And do you test the multiwan?
I tried it but it does not work
It would be nice if we could perceive the lan rules

it only detects bypass and works

marcelloc

E2guardian does not implement multiwan yet.
And as it is a local daemon, it does not match any lan rule.

I'll test file extension and mime types filtering to see what is going on.

ucribrahim

Marcello,

I will add the photos that I took picture of two blacklist directory and inside of their files..

Thanks again.

shallalist.png_thumb

shallalist_file.png_thumb

my_blacklist.png_thumb

my_blacklist_file.png_thumb

marcelloc

@susamlicubuk:

is there progress in blocking file extension
file extension blocking is not working.

I've pushed a fix to file extension. They should work after updating the package.
Mime types I've opened an issue on e2guardian project.

https://github.com/e2guardian/e2guardian/issues/380

marcelloc

@ucribrahim:

I will add the photos that I took picture of two blacklist directory and inside of their files..

It's difficult to see the difference on pictures, try to send me the blacklist. I can check the difference and tell you if it's easy or a big job.

ravegen

Marcelloc,

Can I make a BlockList Site ACL and ExemptedList Site ACL and then apply both ACL to a group.

I am doing this because ExemptedList might apply to multiple group and BlockList might also apply to multiple group. In this matter, I do need to copy paste the same sites or Banned Config and Exempted Config.

I am confused if it is really necessary if a certain ACL should contain Banned and related Grey and Exemption List.

Is that possible ?

ucribrahim

Marcello,

Sir, I will work on this thing a little bit more. I found something that it can he helpful for me to solve this problem. Also I will ask a friend who is a developer. Thank you so much for your help. I'll write you from the forum as soon as possible.

pfsensation

@ravegen:

Marcelloc,

Can I make a BlockList Site ACL and ExemptedList Site ACL and then apply both ACL to a group.

I am doing this because ExemptedList might apply to multiple group and BlockList might also apply to multiple group. In this matter, I do need to copy paste the same sites or Banned Config and Exempted Config.

I am confused if it is really necessary if a certain ACL should contain Banned and related Grey and Exemption List.

Is that possible ?

Just make two ACL's one to be used as default. And one to be used by your specific groups. Personally I have a few, I've kept default to apply ACL to clients outside any groups I've setup, then I've got a kids group with a lot of blocking, then an adult group with more relaxed blocking. All groups need to be assigned to at least one ACL.

ravegen

my confusion is if i create a site acl with enabled ban, disabled grey and exemption the i create another site acl with disabled ban, diabled gre and enabled exemption and apply to a group, will that exemption be enforced while on the other acl, there is no exemption. what is the flow of rule then?

pfsensation

@ravegen:

my confusion is if i create a site acl with enabled ban, disabled grey and exemption the i create another site acl with disabled ban, diabled gre and enabled exemption and apply to a group, will that exemption be enforced while on the other acl, there is no exemption. what is the flow of rule then?

It will apply the second exemption ACL because it isn't disabled. It's not rocket science and its not too hard to give it a test either. I've been working on a global exception list for common apps that don't work through the proxy. But now that Marcello has added bypass onto the transparent rule, I have been using aliases. It works well for me so far, although the annoying part is packet capturing and finding the remote IP's and domains.

willian_wcg

E aí Marcelo, tudo tranquilo?

Estou com um probleminha, não sei se é só comigo rsrsrs, estou com um lab virtual do Pfsense em VM e depois do instalar o e2Guardian, não consigo encontrar nenhum pacote para instalação, exemplo, tentei baixar o cron, pfblocker, etc. simplesmente não encontra nada na busca.

marcelloc

@willian_wcg:

E aí Marcelo, tudo tranquilo?

Estou com um probleminha, não sei se é só comigo rsrsrs, estou com um lab virtual do Pfsense em VM e depois do instalar o e2Guardian, não consigo encontrar nenhum pacote para instalação, exemplo, tentei baixar o cron, pfblocker, etc. simplesmente não encontra nada na busca.

Instala o repositório novamente, atualizei a estrutura de pastas dos pacotes no github essa semana e provavelmente seu pfSense tá reclamando disso.

fetch -q -o /usr/local/etc/pkg/repos/Unofficial.conf https://raw.githubusercontent.com/marcelloc/Unofficial-pfSense-packages/master/Unofficial.conf

susamlicubuk

@marcelloc:

@susamlicubuk:

is there progress in blocking file extension
file extension blocking is not working.

I've pushed a fix to file extension. They should work after updating the package.
Mime types I've opened an issue on e2guardian project.

https://github.com/e2guardian/e2guardian/issues/380

Exe file extension blocking problem still exists
there are oddities in logs
Perception as text/html is very strange

18.05.19 04:24:23 10.35.10.11 10.35.10.11 https://the.earth.li/~sgtatham/putty/latest/w32/putty.exe TRUSTED Banned MIME file type: text/html GET 302 0 - 1 302 - 10.35.10.11 Default - - - - -

marcelloc

Detected as text. :o

pfsensation

Looks like E2Guardian v5.1 is in the works!!

Still getting used to this new forum layout... D:

eneiasmg

This post is deleted!

marcelloc

Version 0.5.4 uses 5.1 binaries and fixes the missing transparent forward rules after pfSense restart.