Unofficial E2guardian package for pfSense

marcelloc · May 16, 2018, 11:42 PM

E2guardian does not implement multiwan yet.
And as it is a local daemon, it does not match any lan rule.

I'll test file extension and mime types filtering to see what is going on.

ucribrahim · May 17, 2018, 6:23 AM

Marcello,

I will add the photos that I took picture of two blacklist directory and inside of their files..

Thanks again.

marcelloc · May 17, 2018, 6:35 AM

@susamlicubuk:

is there progress in blocking file extension
file extension blocking is not working.

I've pushed a fix to file extension. They should work after updating the package.
Mime types I've opened an issue on e2guardian project.

https://github.com/e2guardian/e2guardian/issues/380

marcelloc · May 17, 2018, 6:36 AM

@ucribrahim:

I will add the photos that I took picture of two blacklist directory and inside of their files..

It's difficult to see the difference on pictures, try to send me the blacklist. I can check the difference and tell you if it's easy or a big job.

ravegen · May 17, 2018, 6:51 AM

Marcelloc,

Can I make a BlockList Site ACL and ExemptedList Site ACL and then apply both ACL to a group.

I am doing this because ExemptedList might apply to multiple group and BlockList might also apply to multiple group. In this matter, I do need to copy paste the same sites or Banned Config and Exempted Config.

I am confused if it is really necessary if a certain ACL should contain Banned and related Grey and Exemption List.

Is that possible ?

ucribrahim · May 17, 2018, 6:53 AM

Marcello,

Sir, I will work on this thing a little bit more. I found something that it can he helpful for me to solve this problem. Also I will ask a friend who is a developer. Thank you so much for your help. I'll write you from the forum as soon as possible.

pfsensation · May 17, 2018, 10:49 AM

@ravegen:

Marcelloc,

Can I make a BlockList Site ACL and ExemptedList Site ACL and then apply both ACL to a group.

I am doing this because ExemptedList might apply to multiple group and BlockList might also apply to multiple group. In this matter, I do need to copy paste the same sites or Banned Config and Exempted Config.

I am confused if it is really necessary if a certain ACL should contain Banned and related Grey and Exemption List.

Is that possible ?

Just make two ACL's one to be used as default. And one to be used by your specific groups. Personally I have a few, I've kept default to apply ACL to clients outside any groups I've setup, then I've got a kids group with a lot of blocking, then an adult group with more relaxed blocking. All groups need to be assigned to at least one ACL.

ravegen · May 17, 2018, 11:01 AM

my confusion is if i create a site acl with enabled ban, disabled grey and exemption the i create another site acl with disabled ban, diabled gre and enabled exemption and apply to a group, will that exemption be enforced while on the other acl, there is no exemption. what is the flow of rule then?

pfsensation · May 17, 2018, 12:05 PM

@ravegen:

my confusion is if i create a site acl with enabled ban, disabled grey and exemption the i create another site acl with disabled ban, diabled gre and enabled exemption and apply to a group, will that exemption be enforced while on the other acl, there is no exemption. what is the flow of rule then?

It will apply the second exemption ACL because it isn't disabled. It's not rocket science and its not too hard to give it a test either. I've been working on a global exception list for common apps that don't work through the proxy. But now that Marcello has added bypass onto the transparent rule, I have been using aliases. It works well for me so far, although the annoying part is packet capturing and finding the remote IP's and domains.

willian_wcg · May 18, 2018, 12:24 PM

E aí Marcelo, tudo tranquilo?

Estou com um probleminha, não sei se é só comigo rsrsrs, estou com um lab virtual do Pfsense em VM e depois do instalar o e2Guardian, não consigo encontrar nenhum pacote para instalação, exemplo, tentei baixar o cron, pfblocker, etc. simplesmente não encontra nada na busca.

marcelloc · May 18, 2018, 1:52 PM

@willian_wcg:

E aí Marcelo, tudo tranquilo?

Estou com um probleminha, não sei se é só comigo rsrsrs, estou com um lab virtual do Pfsense em VM e depois do instalar o e2Guardian, não consigo encontrar nenhum pacote para instalação, exemplo, tentei baixar o cron, pfblocker, etc. simplesmente não encontra nada na busca.

Instala o repositório novamente, atualizei a estrutura de pastas dos pacotes no github essa semana e provavelmente seu pfSense tá reclamando disso.

fetch -q -o /usr/local/etc/pkg/repos/Unofficial.conf https://raw.githubusercontent.com/marcelloc/Unofficial-pfSense-packages/master/Unofficial.conf

susamlicubuk · May 19, 2018, 1:28 AM

@marcelloc:

@susamlicubuk:

is there progress in blocking file extension
file extension blocking is not working.

I've pushed a fix to file extension. They should work after updating the package.
Mime types I've opened an issue on e2guardian project.

https://github.com/e2guardian/e2guardian/issues/380

Exe file extension blocking problem still exists
there are oddities in logs
Perception as text/html is very strange

18.05.19 04:24:23 10.35.10.11 10.35.10.11 https://the.earth.li/~sgtatham/putty/latest/w32/putty.exe TRUSTED Banned MIME file type: text/html GET 302 0 - 1 302 - 10.35.10.11 Default - - - - -

marcelloc · May 19, 2018, 1:30 AM

Detected as text. :o

pfsensation · Jun 3, 2018, 2:22 AM

Looks like E2Guardian v5.1 is in the works!!

Still getting used to this new forum layout... D:

eneiasmg · Jun 22, 2018, 7:38 PM

This post is deleted!

marcelloc · Jun 26, 2018, 11:52 AM

Version 0.5.4 uses 5.1 binaries and fixes the missing transparent forward rules after pfSense restart.

ravegen · Jun 28, 2018, 12:01 AM

how can I put or where can I put ACL SSLPorts and ACL SafePorts for Allowed Ports ?

kenrutt · Jun 28, 2018, 12:30 AM

Does anyone know why e2guardian 5 transparent setting does not work right?
When I try to enable transparent mode some web sites will not load. The browser waits awhile and then comes up with error. When I disable transparent mode and put in my own NAT redirect rules for port 80 and 443 everything works perfectly.

pfsensation · Jun 28, 2018, 1:47 AM

@kenrutt What error are you getting? Transparent proxy works perfectly for me without any issues.

kenrutt · Jun 28, 2018, 1:47 AM

@pfsensation

This site can’t be reached
www.ebay.com took too long to respond.
Try:

Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT