pfsense webhosting
-
Ok I have seen some post about this but looking for a clear told how to do it.
I have PPPoE ISP so my Wan uses one of the static Ip's .113
Then we have 3 servers programmed for .114-.115-.116 There pluged into opt1-opt3
and they are programmed to use static as listed above using cloudlinux. but they wont connect/pull data nor can I see them when I put in there IP address. I currently have all rule set for all ports open Just to see about getting connective to the server. currently cant even connect via ssh.I have Nat 1:1 set of the external ip to .114 internal ip host address Destination IP Host net
and coming up empty. Not sure what Im doing wrong. Thanks -
If your ISP can only provide those IPs to you directly on the WAN, rather then routing them to you via a different public IP, then your options are limited.
You can setup IPAliases for those publlic IPs on the WAN connection and then 1:1 NAT them to private IPs internally. That means the servers using them cannot have a public IP directly which may or may not be an issue.
With a non-PPPoE connection you could bridge the WAN and the internal interface in order to use the public IPs directly on the servers.
Steve
-
This post is deleted!