File sharing problem ?

firefox

What switch do you have - that is not something that would be on by default for sure. And would only be available in a smart/managed switch - Can you ping the other computers IP

All computers are connected to Cisco switch (SG 200-26 26-port Gigabit Smart Switch)

and yes i can ping other computers

i just reset the switch to factory Default
Still the same result

Thanks for the help

Derelict

The firewall is not involved at all in same-subnet traffic. You need to dig into your Windows networking and figure out what's missing.

stephenw10

Doesn't look like that switch does PVLAN/Port Isolation. Like you say it wouldn't be enabled by default and you would't be able to ping between hosts if it were.

Looks like some smb setting issue.

Steve

heper

windows firewall is probably set to 'public' or they are not in the same workgroup.

either way, try finding some windows file sharing tutorials

johnpoz

workgroup a machine is nothing more than a place holder for browse service has zero to do with file access or permissions.

Is quite possible they are in wrong network type, ie public and firewall blocking on the windows machines.

Linux to windows could be a problem if windows turned off smbv1 and how the samba is setup on the linux box. What I would do is troubleshoot your problem between 2 windows machines to start with. Get them working and then move on to what your problem might be between linux and windows.

A simple sniff is going to be very handy… Do you even get prompted for creds when you hit \computername or \IPaddress?

If not then file sharing is not enabled or you have a firewall problem.. None of which pfsense has anything to do with when computers are all on the same L2..

Other than pfsense handing out dhcp I assume it is not involved at all in this scenario... You could just connect your boxes to your switch setup static IPs for file sharing.. Only time pfsense would be involved is if your machines were on 2 different networks and pfsense was the router/firewall between these networks.

What happens exactly when you hit \computername or \ipaddress of box sharing files?

firefox

Thanks for the help even though it has nothing to do with pfsense

What happens exactly when you hit \computername or \ipaddress of box sharing files?

nothing happens The computer thinks a bit and that's it

What I would do is troubleshoot your problem between 2 windows machines to start with. Get them working and then move on to what your problem might be between linux and windows

I tried what you wrote
Results
A computer with Windows 10 recognizes computers with Windows 7 and Linux
A computer with Windows 7 does not recognize anything
A computer with Linux does not recognize anything

On a computer with Windows 10 it only recognizes the other computers
You can not access shared folders

If not then file sharing is not enabled or you have a firewall problem.. None of which pfsense has anything to do with when computers are all on the same L2..

There is no firewall on all computers

and All shares are set to
Everyone has the maximum permissions

again thanks

johnpoz

so can windows 7 access the other windows 7 machine?

As to \computername or \ipaddress = nothing.. I would suggest you sniff when you do it. Can you resolve the computer name when you just ping via hostname?

firefox

so can windows 7 access the other windows 7 machine?

no
the computer with Windows 7 does not even see the other computers

Can you resolve the computer name when you just ping via hostname?

I did not understand
The intention to ping a computer name and not ip ?

johnpoz

if your using \ipaddress never mind.

Or are you trying to browse to them via your network tab?

Why linux can not access windows 7 or windows 7 access the other windows 7 seems odd. I would assume an issue with smbV1 but if both are running smbv1 you shouldn't have issue access each other. Or the linux windows combo.

Your going to have much better luck with help over on a windows forum or a linux forum on access windows shares..

again pfsense has zero to do with whatever your problem is… I would suggest again you sniff on one of your windows 7 machine while you try and access the \IPaddress of the other windows 7 machine. This will show you exactly what is happening and why your having a problem... Feel free to post up here you want and will take a look.

Gertjan

@andresontom said in File sharing problem ?:

consulted with the Microsoft tech support canada to know about this problem. I tried to overcome but still its a problem.so is there any solution?

Microsoft - as any other site that talks about networks : you should put all devices that share and access these shares on the same network segment (LAN or VLAN).
To make a long story short : the sharing protocol doesn't travels through routers.

johnpoz

@gertjan said in File sharing problem ?:

the sharing protocol doesn’t travels through routers.

What?? You mean discovery protocols?? SMB works just fine through routers/firewalls - if it didn't corp networks would have a hell of a time and really large flat networks.

Same goes for other non microsoft/windows sharing protocols like NFS and AFP... All of them work through firewalls/routers just fine.. Lame discovery protocols are what is limited not the actual sharing protocol.

You might think your helping the user understand their problem at a basic level - but then they pick that up and parrot it elsewhere and the next thing you know you have some nonsense FUD that just will not die.. Like the one where machines need to be in the same workgroup to share files, etc... This is been FUD for years that is just pure utter nonsense..