Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Netgate SG3100 restarting frequently

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    11 Posts 7 Posters 1.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      ayanbanerjee
      last edited by

      Hi,

      I have a Netgate SG3100 with Pfsense 2.4.3-RELEASE-p1 and which is frequently restarting, please find below the current log,

      Jul 3 11:13:18 php-fpm /index.php: Successful login for user 'admin' from: 10.10.10.3
      Jul 3 10:52:52 kernel pid 40575 (sysctl), uid 0: exited on signal 11 (core dumped)
      Jul 3 10:32:10 check_reload_status Reloading filter
      Jul 3 10:32:10 php-fpm /rc.newipsecdns: IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
      Jul 3 10:31:55 php-fpm 20394 /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use GW_WAN.
      Jul 3 10:31:54 check_reload_status Reloading filter
      Jul 3 10:31:54 check_reload_status Restarting OpenVPN tunnels/interfaces
      Jul 3 10:31:54 check_reload_status Restarting ipsec tunnels
      Jul 3 10:31:54 check_reload_status updating dyndns GW_WAN
      Jul 3 10:31:54 rc.gateway_alarm 2637 >>> Gateway alarm: GW_WAN (Addr:182.71.195.97 Alarm:0 RTT:5660ms RTTsd:39225ms Loss:15%)
      Jul 3 10:31:48 login login on ttyu0 as root
      Jul 3 10:31:48 getty 78675 open /dev/ttyv0: No such file or directory
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Packet Encoding: Ethernet
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Opening mvneta2
      Jul 3 10:31:46 bandwidthd Monitoring subnet 182.71.195.96 with netmask 255.255.255.248
      Jul 3 10:31:46 bandwidthd Monitoring subnet 182.71.195.96 with netmask 255.255.255.248
      Jul 3 10:31:46 bandwidthd Monitoring subnet 192.168.1.0 with netmask 255.255.255.0
      Jul 3 10:31:46 bandwidthd Monitoring subnet 192.168.1.0 with netmask 255.255.255.0
      Jul 3 10:31:45 php-fpm /rc.start_packages: [lightsquid] Updating cronjobs...
      Jul 3 10:31:45 check_reload_status Syncing firewall
      Jul 3 10:31:45 check_reload_status Syncing firewall
      Jul 3 10:31:45 php-fpm /rc.start_packages: [lightsquid] Removing old cronjobs...
      Jul 3 10:31:45 php-fpm /rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.
      Jul 3 10:31:45 php-fpm /rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.
      Jul 3 10:31:45 check_reload_status Reloading filter
      Jul 3 10:31:44 php-fpm /rc.start_packages: [squid] Starting a proxy monitor script
      Jul 3 10:31:44 php-fpm /rc.start_packages: [squid] Reloading for configuration sync...
      Jul 3 10:31:43 php-fpm /rc.start_packages: [squid] Stopping any running proxy monitors
      Jul 3 10:31:41 php-fpm /rc.start_packages: [squid] Removing freshclam cronjob.
      Jul 3 10:31:41 php-fpm /rc.start_packages: [squid] Antivirus features disabled.
      Jul 3 10:31:41 php-fpm /rc.start_packages: [squid] Adding cronjobs ...
      Jul 3 10:31:40 php-fpm /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
      Jul 3 10:31:30 check_reload_status Reloading filter
      Jul 3 10:31:29 php-fpm /rc.start_packages: [squid] Starting a proxy monitor script
      Jul 3 10:31:29 php-fpm /rc.start_packages: [squid] Starting service...
      Jul 3 10:31:26 php-fpm /rc.start_packages: [squid] Removing freshclam cronjob.
      Jul 3 10:31:26 php-fpm /rc.start_packages: [squid] Antivirus features disabled.
      Jul 3 10:31:26 php-fpm /rc.start_packages: [squid] Adding cronjobs ...
      Jul 3 10:31:25 sshlockout 6655 sshlockout/webConfigurator v3.0 starting up
      Jul 3 10:31:25 php-fpm /rc.start_packages: [squid] - squid_resync function call pr: bp: rpc:no
      Jul 3 10:31:25 kernel done.
      Jul 3 10:31:25 php-fpm /rc.start_packages: Restarting/Starting all packages.
      Jul 3 10:31:25 kernel done.
      Jul 3 10:31:25 syslogd kernel boot file is /boot/kernel/kernel
      Jul 3 10:31:24 syslogd exiting on signal 15
      Jul 3 10:31:24 syslogd Logging subprocess 24122 (exec /usr/local/sbin/sshlockout_pf 15) exited due to signal 15.
      Jul 3 10:31:22 root /etc/rc.d/hostid: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
      Jul 3 10:31:22 kernel done.
      Jul 3 10:31:22 php-cgi rc.bootup: Creating rrd update script
      Jul 3 10:31:20 php-fpm 337 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules.
      Jul 3 10:31:19 php-fpm 337 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules.
      Jul 3 10:31:19 kernel done
      Jul 3 10:31:19 php-fpm 337 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules.
      Jul 3 10:31:19 kernel .done.
      Jul 3 10:31:19 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules.
      Jul 3 10:31:19 kernel ..
      Jul 3 10:31:19 kernel .
      Jul 3 10:31:19 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules.
      Jul 3 10:31:19 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules.
      Jul 3 10:31:19 kernel done.
      Jul 3 10:31:19 check_reload_status Updating all dyndns
      Jul 3 10:31:19 kernel done.
      Jul 3 10:31:18 kernel done.
      Jul 3 10:31:18 php-cgi rc.bootup: NTPD is starting up.
      Jul 3 10:31:18 kernel done.
      Jul 3 10:31:18 check_reload_status Reloading filter
      Jul 3 10:31:18 check_reload_status Restarting OpenVPN tunnels/interfaces
      Jul 3 10:31:18 check_reload_status Restarting ipsec tunnels
      Jul 3 10:31:18 check_reload_status updating dyndns GW_WAN
      Jul 3 10:31:18 rc.gateway_alarm 46979 >>> Gateway alarm: GW_WAN (Addr:182.71.195.97 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
      Jul 3 10:31:17 kernel e6000sw0port1: link state changed to UP
      Jul 3 10:31:16 php-fpm 337 /rc.newwanip: rc.newwanip: on (IP address: 10.10.10.1) (interface: []) (real interface: ovpns1).
      Jul 3 10:31:16 php-fpm 337 /rc.newwanip: rc.newwanip: Info: starting on ovpns1.
      Jul 3 10:31:16 sshlockout 24122 sshlockout/webConfigurator v3.0 starting up
      Jul 3 10:31:16 sshd 23922 Server listening on 0.0.0.0 port 22.
      Jul 3 10:31:16 sshd 23922 Server listening on :: port 22.
      Jul 3 10:31:16 kernel done.
      Jul 3 10:31:16 kernel done.
      Jul 3 10:31:16 php-cgi rc.bootup: ROUTING: setting default route to 182.71.195.97
      Jul 3 10:31:16 kernel .done.
      Jul 3 10:31:15 kernel ..
      Jul 3 10:31:15 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules.
      Jul 3 10:31:15 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules.
      Jul 3 10:31:15 kernel .
      Jul 3 10:31:15 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules.
      Jul 3 10:31:15 kernel .
      Jul 3 10:31:15 kernel pflog0: promiscuous mode enabled
      Jul 3 10:31:15 check_reload_status rc.newwanip starting ovpns1
      Jul 3 10:31:15 kernel ovpns1: link state changed to UP
      Jul 3 10:31:15 kernel tun1: changing name to 'ovpns1'
      Jul 3 10:31:15 kernel done.
      Jul 3 10:31:15 php-cgi rc.bootup: Resyncing OpenVPN instances.
      Jul 3 10:31:15 kernel mvneta2: link state changed to UP
      Jul 3 10:31:15 kernel e6000sw0port1: link state changed to DOWN
      Jul 3 10:31:15 check_reload_status Linkup starting mvneta2
      Jul 3 10:31:15 kernel random: unblocking device.
      Jul 3 10:31:15 kernel WARNING: / was not properly dismounted
      Jul 3 10:31:15 kernel Trying to mount root from ufs:/dev/diskid/DISK-AA180417000000000090s2a [rw,noatime]...
      Jul 3 10:31:15 kernel Release APs
      Jul 3 10:31:15 kernel ada0: 30029MB (61500000 512 byte sectors)
      Jul 3 10:31:15 kernel ada0: Command Queueing enabled
      Jul 3 10:31:15 kernel ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
      Jul 3 10:31:15 kernel ada0: Serial Number AA180417000000000090
      Jul 3 10:31:15 kernel ada0: <NT-32 Q0927A> ACS-2 ATA SATA 3.x device
      Jul 3 10:31:15 kernel ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
      Jul 3 10:31:15 kernel uhub0: 1 port with 1 removable, self powered
      Jul 3 10:31:15 kernel mmcsd0rpmb: 4MB partion 3 at mmcsd0
      Jul 3 10:31:15 kernel mmcsd0boot1: 4MB partion 2 at mmcsd0
      Jul 3 10:31:15 kernel mmcsd0boot0: 4MB partion 1 at mmcsd0
      Jul 3 10:31:15 kernel mmcsd0: 8GB <MMCHC 008GE0 0.0 SN D7545102 MFG 06/2015 by 17 0x0000> at mmc0 50.0MHz/8bit/65535-block
      Jul 3 10:31:15 kernel mmc0: <MMC/SD bus> on sdhci_fdt0
      Jul 3 10:31:15 kernel uhub1: 2 ports with 2 removable, self powered
      Jul 3 10:31:15 kernel uhub1: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
      Jul 3 10:31:15 kernel ugen1.1: <Marvell XHCI root HUB> at usbus1
      Jul 3 10:31:15 kernel uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
      Jul 3 10:31:15 kernel ugen0.1: <Marvell EHCI root HUB> at usbus0
      Jul 3 10:31:15 kernel usbus1: 5.0Gbps Super Speed USB v3.0
      Jul 3 10:31:15 kernel usbus0: 480Mbps High Speed USB v2.0
      Jul 3 10:31:15 kernel e6000sw0port4: link state changed to DOWN
      Jul 3 10:31:15 kernel e6000sw0port3: link state changed to DOWN
      Jul 3 10:31:15 kernel e6000sw0port2: link state changed to DOWN
      Jul 3 10:31:15 kernel e6000sw0port1: link state changed to UP
      Jul 3 10:31:15 kernel mx25l0: n25q128, sector 65536 bytes, 256 sectors
      Jul 3 10:31:15 kernel mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
      Jul 3 10:31:15 kernel spibus0: <OFW SPI bus> on spi0
      Jul 3 10:31:15 kernel mvneta1: link state changed to UP
      Jul 3 10:31:15 kernel Timecounters tick every 1.000 msec
      Jul 3 10:31:15 kernel cryptosoft0: <software crypto>
      Jul 3 10:31:15 kernel cpu1: <Open Firmware CPU> on cpulist0
      Jul 3 10:31:15 kernel cpu0: <Open Firmware CPU> on cpulist0
      Jul 3 10:31:15 kernel cpulist0: <Open Firmware CPU Group> on ofwbus0
      Jul 3 10:31:15 kernel pci3: <PCI bus> on pcib3
      Jul 3 10:31:15 kernel pcib3: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
      Jul 3 10:31:15 kernel pci2: <PCI bus> on pcib2
      Jul 3 10:31:15 kernel pcib2: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
      Jul 3 10:31:15 kernel pci1: <PCI bus> on pcib1
      Jul 3 10:31:15 kernel pcib1: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
      Jul 3 10:31:15 kernel pci0: <PCI bus> on pcib0
      Jul 3 10:31:15 kernel pcib0: <Marvell Integrated PCI/PCI-E Controller> on pcib_ctrl0
      Jul 3 10:31:15 kernel pcib_ctrl0: <Marvell Integrated PCIe Bus Controller> on simplebus0
      Jul 3 10:31:15 kernel usbus1 on xhci0
      Jul 3 10:31:15 kernel xhci0: 32 bytes context size, 32-bit DMA
      Jul 3 10:31:15 kernel xhci0: <Marvell Integrated USB 3.0 controller> mem 0xf8000-0xfbfff,0xfc000-0xfffff irq 36 on simplebus1
      Jul 3 10:31:15 kernel sdhci_fdt0: 1 slot(s) allocated
      Jul 3 10:31:15 kernel sdhci_fdt0: <ARMADA38X SDHCI controller> mem 0xd8000-0xd8fff,0xdc000-0xdc0ff,0x18454-0x18457 irq 34 on simplebus1
      Jul 3 10:31:15 kernel armada_thermal0: <Armada380 Thermal Control> mem 0xe4078-0xe407b,0xe4074-0xe4077 on simplebus1
      Jul 3 10:31:15 kernel ahcich1: <AHCI channel> at channel 1 on ahci0
      Jul 3 10:31:15 kernel ahcich0: <AHCI channel> at channel 0 on ahci0
      Jul 3 10:31:15 kernel ahci0: quirks=0x200010<2CH,MRVL_SR_DEL>
      Jul 3 10:31:15 kernel ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
      Jul 3 10:31:15 kernel ahci0: <Marvell AHCI Controller> mem 0xa8000-0xa9fff irq 31 on simplebus1
      Jul 3 10:31:15 kernel rtc0: <Marvell Integrated RTC> mem 0xa3800-0xa381f,0x184a0-0x184ab irq 30 on simplebus1
      Jul 3 10:31:15 kernel ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel ukphy1: <Generic IEEE 802.3u media interface> PHY 0 on miibus5
      Jul 3 10:31:15 kernel miibus5: <MII bus> on mvneta2
      Jul 3 10:31:15 kernel mvneta2: Ethernet address: 00:08:a2:0d:0b:0f
      Jul 3 10:31:15 kernel mvneta2: version is 10
      Jul 3 10:31:15 kernel mvneta2: <NETA controller> mem 0x70000-0x73fff irq 29 on simplebus1
      Jul 3 10:31:15 kernel usbus0 on ehci0
      Jul 3 10:31:15 kernel usbus0: EHCI version 1.0
      Jul 3 10:31:15 kernel ehci0: <Marvell Integrated USB 2.0 controller> mem 0x58000-0x584ff irq 28 on simplebus1
      Jul 3 10:31:15 kernel etherswitch0: <Switch controller> on e6000sw0
      Jul 3 10:31:15 kernel e6000sw0: switch is ready.
      Jul 3 10:31:15 kernel e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel e1000phy3: <Marvell 88E1000 Gigabit PHY> PHY 20 on miibus4
      Jul 3 10:31:15 kernel miibus4: <MII bus> on e6000sw0
      Jul 3 10:31:15 kernel e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus3
      Jul 3 10:31:15 kernel miibus3: <MII bus> on e6000sw0
      Jul 3 10:31:15 kernel e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus2
      Jul 3 10:31:15 kernel miibus2: <MII bus> on e6000sw0
      Jul 3 10:31:15 kernel e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus1
      Jul 3 10:31:15 kernel miibus1: <MII bus> on e6000sw0
      Jul 3 10:31:15 kernel e6000sw0: single-chip addressing mode
      Jul 3 10:31:15 kernel e6000sw0: <Marvell 88E6141> on mdio0
      Jul 3 10:31:15 kernel mdio0: <MDIO> on mvneta1
      Jul 3 10:31:15 kernel mvneta1: Ethernet address: 00:08:a2:0d:0b:0e
      Jul 3 10:31:15 kernel mvneta1: version is 10
      Jul 3 10:31:15 kernel mvneta1: <NETA controller> mem 0x34000-0x37fff irq 27 on simplebus1
      Jul 3 10:31:15 kernel ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      Jul 3 10:31:15 kernel ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
      Jul 3 10:31:15 kernel miibus0: <MII bus> on mvneta0
      Jul 3 10:31:15 kernel mvneta0: Ethernet address: 00:08:a2:0d:0b:0d
      Jul 3 10:31:15 kernel mvneta0: version is 10
      Jul 3 10:31:15 kernel mvneta0: <NETA controller> mem 0x30000-0x33fff irq 26 on simplebus1
      Jul 3 10:31:15 kernel pmsu0: <Power Management Service Unit> mem 0x22000-0x22fff on simplebus1
      Jul 3 10:31:15 kernel wdt0: <Marvell Watchdog Timer> mem 0x20300-0x20333,0x20704-0x20707,0x18260-0x18263 on simplebus1
      Jul 3 10:31:15 kernel uart1: <16550 or compatible> mem 0x12100-0x121ff irq 10 on simplebus1
      Jul 3 10:31:15 kernel uart0: console (-1,n,8,1)
      Jul 3 10:31:15 kernel uart0: <16550 or compatible> mem 0x12000-0x120ff irq 9 on simplebus1
      Jul 3 10:31:15 kernel device_attach: gpio1 attach returned 6
      Jul 3 10:31:15 kernel gpio1: <NXP PCA9552 LED driver> at addr 0xc0 on iicbus0
      Jul 3 10:31:15 kernel gpioc0: <GPIO controller> on gpio0
      Jul 3 10:31:15 kernel gpiobus0: <OFW GPIO bus> on gpio0
      Jul 3 10:31:15 kernel gpio0: <ISSI IS31FL3199 9 channel light effect LED driver> at addr 0xce on iicbus0
      Jul 3 10:31:15 kernel device_attach: gpio0 attach returned 6
      Jul 3 10:31:15 kernel gpio0: <NXP PCA9552 LED driver> at addr 0xc0 on iicbus0
      Jul 3 10:31:15 kernel iic0: <I2C generic I/O> on iicbus0
      Jul 3 10:31:15 kernel iicbus0: <OFW I2C bus> on twsi0
      Jul 3 10:31:15 kernel twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 7 on simplebus1
      Jul 3 10:31:15 kernel spi0: <Marvell SPI controller> mem 0x10600-0x1064f irq 5 on simplebus1
      Jul 3 10:31:15 kernel cesa1: <Marvell Cryptographic Engine and Security Accelerator> mem 0x92000-0x92fff,0x9f000-0x9ffff irq 2 on simplebus1
      Jul 3 10:31:15 kernel cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x90fff,0x9d000-0x9dfff irq 1 on simplebus1
      Jul 3 10:31:15 kernel Event timer "MPCore" frequency 800000000 Hz quality 1000
      Jul 3 10:31:15 kernel mp_tmr1: <ARM MPCore Timers> mem 0xc600-0xc61f irq 4 on simplebus1
      Jul 3 10:31:15 kernel Timecounter "MPCore" frequency 800000000 Hz quality 800
      Jul 3 10:31:15 kernel mp_tmr0: <ARM MPCore Timers> mem 0xc200-0xc21f irq 3 on simplebus1
      Jul 3 10:31:15 kernel mpic0: <Marvell Integrated Interrupt Controller> mem 0x20a00-0x20ccf,0x21870-0x21b6f irq 19 on simplebus1
      Jul 3 10:31:15 kernel gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 192
      Jul 3 10:31:15 kernel gic0: <ARM Generic Interrupt Controller> mem 0xd000-0xdfff,0xc100-0xc1ff on simplebus1
      Jul 3 10:31:15 kernel l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
      Jul 3 10:31:15 kernel l2cache0: Part number: 0x3, release: 0x9
      Jul 3 10:31:15 kernel l2cache0: cannot allocate IRQ, not using interrupt
      Jul 3 10:31:15 kernel l2cache0: <PL310 L2 cache controller> mem 0x8000-0x8fff on simplebus1
      Jul 3 10:31:15 kernel simplebus1: <Flattened device tree simple bus> on simplebus0
      Jul 3 10:31:15 kernel simplebus0: <Flattened device tree simple bus> on ofwbus0
      Jul 3 10:31:15 kernel ofwbus0: <Open Firmware Device Tree>
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0135ec8, 0) error 1
      Jul 3 10:31:15 kernel iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc012c64c, 0) error 1
      Jul 3 10:31:15 kernel ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc012c59c, 0) error 1
      Jul 3 10:31:15 kernel ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (ipw_bss_fw, 0xc012c4ec, 0) error 1
      Jul 3 10:31:15 kernel ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
      Jul 3 10:31:15 kernel wlan: mac acl policy registered
      Jul 3 10:31:15 kernel random: entropy device external interface
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0136028, 0) error 1
      Jul 3 10:31:15 kernel iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
      Jul 3 10:31:15 kernel module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0135f78, 0) error 1
      Jul 3 10:31:15 kernel iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      Jul 3 10:31:15 kernel iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
      Jul 3 10:31:15 kernel FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
      Jul 3 10:31:15 kernel Instruction cache prefetch enabled, data cache prefetch disabled
      Jul 3 10:31:15 kernel SOC: Marvell 88F6820, TClock 250MHz, Frequency 1600MHz
      Jul 3 10:31:15 kernel avail memory = 2082213888 (1985 MB)
      Jul 3 10:31:15 kernel real memory = 2147479552 (2047 MB)
      Jul 3 10:31:15 kernel 32KB/32B 4-way instruction cache Read-Alloc
      Jul 3 10:31:15 kernel 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
      Jul 3 10:31:15 kernel Cache level 1:
      Jul 3 10:31:15 kernel LoUU:2 LoC:2 LoUIS:2
      Jul 3 10:31:15 kernel UMULL, SMULL, SIMD(ext)
      Jul 3 10:31:15 kernel Optional instructions:
      Jul 3 10:31:15 kernel Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
      Jul 3 10:31:15 kernel CPU Features:
      Jul 3 10:31:15 kernel CPU: ARM Cortex-A9 r4p1 (ECO: 0x00000000)
      Jul 3 10:31:15 kernel FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
      Jul 3 10:31:15 kernel root@buildbot2.netgate.com:/xbuilder/crossbuild-243/work/armv6/obj/cETt6vGN/arm.armv6/xbuilder/crossbuild-243/pfSense/tmp/FreeBSD-src/sys/pfSense-SG-3100 arm
      Jul 3 10:31:15 kernel FreeBSD 11.1-RELEASE-p10 #0 r313908+9347c667615(factory-RELENG_2_4): Thu May 10 17:03:14 CDT 2018
      Jul 3 10:31:15 kernel FreeBSD is a registered trademark of The FreeBSD Foundation.
      Jul 3 10:31:15 kernel The Regents of the University of California. All rights reserved.
      Jul 3 10:31:15 kernel Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      Jul 3 10:31:15 kernel Copyright (c) 1992-2017 The FreeBSD Project.
      Jul 3 10:31:15 syslogd kernel boot file is /boot/kernel/kernel
      Jul 3 10:16:40 kernel arp: 192.168.1.1 moved from 00:e0:4a:0a:57:ec to 00:0c:ff:b0:84:cc on mvneta1
      Jul 3 10:06:50 kernel arp: 192.168.1.1 moved from 00:0c:ff:b0:84:cc to 00:e0:4a:0a:57:ec on mvneta1
      Jul 3 09:16:44 sshlockout 55483 sshlockout/webConfigurator v3.0 starting up
      Jul 3 09:16:44 php-fpm /index.php: Successful login for user 'admin' from: 192.168.1.2
      Jul 3 00:28:15 kernel pid 34293 (php-fpm), uid 0: exited on signal 11 (core dumped)

      Please help me !!

      Regards,
      Ayan

      1 Reply Last reply Reply Quote 0
      • H
        heper
        last edited by

        logs don't indicate why it has crashed. doesn't it ask to send crashdumps ?

        1 Reply Last reply Reply Quote 0
        • A
          ayanbanerjee
          last edited by

          Sorry, I didn't get any crash dump.. could you please help me on this.. how to get the dump file ?

          1 Reply Last reply Reply Quote 0
          • GertjanG
            Gertjan
            last edited by

            After a crash, when you enter the GUI, you should see a notifications that informs you that a crash dump exists.

            Btw : when entering the GUI, remove some or all packages (I would start with the real resource hogs like squid and bandwidthd for the duration of the tests)

            No "help me" PM's please. Use the forum, the community will thank you.
            Edit : and where are the logs ??

            1 Reply Last reply Reply Quote 0
            • jimpJ
              jimp Rebel Alliance Developer Netgate
              last edited by

              Depending on the type of crash, it may not offer a crash dump. This doesn't look like the type of crash that generates a crash dump that the GUI would handle.

              Signal 11 issues are tricky. They usually, but not always, indicate a physical problem of some sort: Overheating, unstable power, hardware issue, etc. They can also be software, but in this case since even the sysctl command is crashing that seems less likely.

              First thing, get a backup from Diagnostics > Backup/Restore. Next, try moving it to a different power source, preferably a UPS or at least something with a power/line conditioner. Check the temperature in the GUI and see if it's getting overheated. Then, you might try to reinstall the operating system on that unit.

              If all else fails, visit https://go.netgate.com/support/home and open a ticket and the support crew can assist.

              Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

              Need help fast? Netgate Global Support!

              Do not Chat/PM for help!

              1 Reply Last reply Reply Quote 0
              • M
                msf2000
                last edited by

                I'm having the same problem too. Spontaneous reboots overnight. Nothing in the logs of course. Still looking into it....

                1 Reply Last reply Reply Quote 0
                • U
                  Uncle_Bacon
                  last edited by

                  Does anyone have any updates to this? I am a new SG-3100 owner and I'm finding that for no apparent reason, the device just reboots. The logs show nothing to do with a possible reason why either... Is it possible the device is overheating? What are the temperature limits on these devices?

                  ...
Oct 4 21:53:47	check_reload_status		Syncing firewall
Oct 4 21:53:47	php-fpm		/firewall_rules.php: Beginning configuration backup to .https://acb.netgate.com/save
Oct 4 21:53:48	php-fpm		/firewall_rules.php: End of configuration backup to https://acb.netgate.com/save (success).
Oct 4 21:53:56	check_reload_status		Syncing firewall
Oct 4 21:53:56	php-fpm		/firewall_rules_edit.php: Beginning configuration backup to .https://acb.netgate.com/save
Oct 4 21:53:57	php-fpm		/firewall_rules_edit.php: End of configuration backup to https://acb.netgate.com/save (success).
Oct 4 21:54:04	check_reload_status		Reloading filter
Oct 4 21:57:07	syslogd		kernel boot file is /boot/kernel/kernel
Oct 4 21:57:07	kernel		Copyright (c) 1992-2018 The FreeBSD Project.
Oct 4 21:57:07	kernel		Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 4 21:57:07	kernel		The Regents of the University of California. All rights reserved.
Oct 4 21:57:07	kernel		FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 4 21:57:07	kernel		FreeBSD 11.2-RELEASE-p3 #12 220591260a0(factory-RELENG_2_4_4): Thu Sep 20 10:03:17 EDT 2018
Oct 4 21:57:07	kernel		root@buildbot3:/crossbuild/244/obj/armv6/zusWWsAv/arm.armv6/crossbuild/244/pfSense/tmp/FreeBSD-src/sys/pfSense-SG-3100 arm
Oct 4 21:57:07	kernel		FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
Oct 4 21:57:07	kernel		CPU: ARM Cortex-A9 r4p1 (ECO: 0x00000000)
...
                  1 Reply Last reply Reply Quote 0
                  • GrimsonG
                    Grimson Banned
                    last edited by

                    https://forum.netgate.com/topic/135376/solved-random-reboots/25

                    1 Reply Last reply Reply Quote 0
                    • jimpJ
                      jimp Rebel Alliance Developer Netgate
                      last edited by

                      A reboot without any log entries like that is nearly always a physical cause, typically power or heat. I haven't seen either of mine reset for that but they tend to stay fairly comfortable where I have them.

                      Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                      Need help fast? Netgate Global Support!

                      Do not Chat/PM for help!

                      1 Reply Last reply Reply Quote 0
                      • M
                        msf2000
                        last edited by

                        Some time ago, I identified the source of my random reboots. The culprit was snort signature updates. I had configured /tmp to be in RAM, and the system was running out of memory/drive space during the rule update. This caused a spontaeous reboot. After disabling the /tmp in RAM feature (and reducing the number of enabled rules), the reboots stopped and the platform is stable.

                        1 Reply Last reply Reply Quote 0
                        • U
                          Uncle_Bacon
                          last edited by

                          I appreciate the suggestions. I put it on a UPS for a more clean supply of power. The heat seems to hover around 60-63°C. However, through some further research followed by some trial and error, I have narrowed the issue to having a traffic shaper on a VLAN. Seems to be a common issue for some. I have since removed all VLAN traffic shapers and I've been up for nearly 24 hours. It was rebooting every hour before. Thanks for all the help!

                          1 Reply Last reply Reply Quote 1
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.