Upgraded from 2.4.3 -> 2.4.3_1. IPv6 problems
-
Hi all,
So yesterday everything was working fine, and noticed there was an update available, so I upgraded to 2.4.3_1. Afterwards, I noticed that IPv6 is not functioning properly anymore. I'm being assigned addresses just fine, but it's not routing any of the traffic. From the router itself I am able to 'ping6' anything I want, but on the LAN side nothing goes either way.
Is anyone able to assist on what the issue might be? I did find another post about it and I tried applying a patch (https://github.com/pfsense/pfsense/commit/c9159949e06cc91f6931bf2326672df7cad706f4.patch) but with no such luck.
Thanks for any assistance!
-
How do you have IPv6 configured on that device?
You see any logged errors?
It's not a problem I'm aware of, it's still working fine here.
Steve
-
So what's strange is while poking around and not changing any settings, it seems to have started working again.
Not sure if it's possible to delete this post in the mean time.
-
Better to leave it up for someone who might also hit that IMO.
I have seen significant delays pulling a PD before. I always blamed my ISPs flaky v6.
Steve
-
Just didn't want to waste any "space" on the forum :)
What's really strange is both the WAN and LAN on pfSense had an address, and my laptop was even given it's usual address. It just seemed like a routing issue. Not taking blame away from my ISP, they are terrible, but I'm just not sure!
Will report back if I have any more issues!
-
@xero9 said in Upgraded from 2.4.3 -> 2.4.3_1. IPv6 problems:
....Will report back if I have any more issues!
Maybe this one :
The latest upgrade ( 2.4.3-RELEASE-p1 ) came out about 2 month ago.
Better check out why you discovered this only yesterday.
