ZFS ISSUES!!! built on Wed Jul 11 16:46:22 EDT 2018

chpalmer

https://forum.netgate.com/topic/132727/latest-snap-stopping-with-error-2-4-on-watchguard-xcs-box

I was running a snap from earlier this morning and then tried the one labeled about 1130 when I started seeing this.

LostInIgnorance

Someone has filled out a redmine ticket related to it. I suggest tracking progress there.

https://redmine.pfsense.org/issues/8639

Raul Ramos

If i install at least built on Thu Jul 12 08:51:04 EDT 2018 manually i can boot pFsense again. Don't know if is a update problem.

LostInIgnorance

I have not updated mine yet, but will be getting out of work soon to test as I don't have remote IPMI setup yet and am afraid to do it remotely at this moment of noway to get it back up.

LostInIgnorance

@raul-ramos It's a no-go for me on that snapshot, although I did not manually modify the config after to add the lines back in.

w0w

Yes, this is upgrade bug. Clean install works, but if you upgrade it to the next snapshot it is going to fail on boot.

maverick_slo

Updated redmine as well...

Clean install of (2.4.4-DEVELOPMENT (amd64)built on Fri Jul 13 10:56:07 EDT 2018FreeBSD 11.2-RELEASE)
Restore config
Reboot
Upgrade and reboot (2.4.4.a.20180713.1957)
Borked system zfs won`t mount

w0w

@maverick_slo
Actually you don't need to restore config, at least it is not necessary to reproduce the problem. I've used clean install in VM and right after boot updated it with option 13, without configuring anything.

maverick_slo

Yeah I know.
I just wanted to note exactly what I did.

But lack of offical response makes me concerned...
At least they could pull upgrades.

w0w

@maverick_slo
May be it's vacations. Delays are expected in summer time
And this is development branch that have low priority I think, because everyone who uses it, must be ready for fail. The other thing embarrassing me is that 2.4.4 have too much major changes for the minor version.

w0w

Should be fixed with recent snapshot.

maverick_slo

Tried todazs and same mountroot error.

w0w

@maverick_slo
Before upgrade check that your /boot/loader.conf contains

zfs_load="YES"

Mine was just missing. I've added it manually and upgraded successfully to JUL 17 7:07 version.

Hugovsky

I do have zfs_load="YES" on loader.conf and it failed to upgrade from:

2.4.4-DEVELOPMENT (amd64)
built on Fri Jul 13 19:58:06 EDT 2018
FreeBSD 11.2-RELEASE

to:

Can't be sure snapshot version. It was arround 14:00 GMT+1.

w0w

0_1531844987826_VirtualBox_pfSense-244 testing bug_17_07_2018_19_25_49.png

Clean install and upgrade, both versions are on the screenshot. No problem after boot and reboot.

Hugovsky

Well.... it didn't work for me.

EDIT: sorry. Adding pics.

EDIT2: Now it should be here.

maverick_slo

For me either... Same error

Updating repositories metadata...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Setting vital flag on pkg... done.
Downloading upgrade packages...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking for upgrades (9 candidates): ......... done
Processing candidates (9 candidates): ......... done
The following 10 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
openvpn-auth-script: 1.0.0.3 [pfSense]

Installed packages to be UPGRADED:
snort: 2.9.11.1_1 -> 2.9.11.1_2 [pfSense]
php72-pfSense-module: 0.62_1 -> 0.62_5 [pfSense]
pfSense-rc: 2.4.4.a.20180713.1056 -> 2.4.4.a.20180717.0756 [pfSense-core]
pfSense-kernel-pfSense: 2.4.4.a.20180713.1056 -> 2.4.4.a.20180717.0756 [pfSense-core]
pfSense-default-config: 2.4.4.a.20180713.1056 -> 2.4.4.a.20180717.0756 [pfSense-core]
pfSense-base: 2.4.4.a.20180713.1056 -> 2.4.4.a.20180717.0756 [pfSense-core]
pfSense: 2.4.4.a.20180713.0955 -> 2.4.4.a.20180717.0730 [pfSense]
git: 2.18.0 -> 2.18.0_1 [pfSense]
e2fsprogs-libuuid: 1.44.2_1 -> 1.44.3 [pfSense]

Number of packages to be installed: 1
Number of packages to be upgraded: 9

57 MiB to be downloaded.
[1/10] Fetching snort-2.9.11.1_2.txz: .......... done
[2/10] Fetching php72-pfSense-module-0.62_5.txz: ...... done
[3/10] Fetching pfSense-rc-2.4.4.a.20180717.0756.txz: .. done
[4/10] Fetching pfSense-kernel-pfSense-2.4.4.a.20180717.0756.txz: .......... done
[5/10] Fetching pfSense-default-config-2.4.4.a.20180717.0756.txz: . done
[6/10] Fetching pfSense-base-2.4.4.a.20180717.0756.txz: .......... done
[7/10] Fetching pfSense-2.4.4.a.20180717.0730.txz: . done
[8/10] Fetching git-2.18.0_1.txz: .......... done
[9/10] Fetching e2fsprogs-libuuid-1.44.3.txz: ..... done
[10/10] Fetching openvpn-auth-script-1.0.0.3.txz: . done
Checking integrity... done (0 conflicting)

Upgrading pfSense kernel...
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
pfSense-kernel-pfSense: 2.4.4.a.20180713.1056 -> 2.4.4.a.20180717.0756 [pfSense-core]

Number of packages to be upgraded: 1
[1/1] Upgrading pfSense-kernel-pfSense from 2.4.4.a.20180713.1056 to 2.4.4.a.20180717.0756...
[1/1] Extracting pfSense-kernel-pfSense-2.4.4.a.20180717.0756: .......... done
===> Keeping a copy of current kernel in /boot/kernel.old
Upgrade is complete. Rebooting in 10 seconds.
Success

w0w

Will try exactly 2.4.4.a.20180713.1056 to see what happens.

w0w

@maverick_slo
yes, it refuses to boot with the same error after upgrade.
I don't understand how it's happening... Ask on redmine, please.

Raul Ramos

ZFS needs opensolaris.ko.

/boot/loader.conf should have this line.

opensolaris_load="YES"
zfs_load="YES"