Using LG G3 as 4G NDIS device ak USB Tethering
-
Can this device used as ndis network controler ? And do i need to modeswitch, and how ?
usbconfig -d ugen4.3 ugen4.3: <LG Electronics Inc. LGE Android Phone> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
usbconfig -d ugen4.3 dump_all_config_desc ugen4.3: <LG Electronics Inc. LGE Android Phone> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x00bb bNumInterfaces = 0x0006 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x0080 bMaxPower = 0x00fa Additional Descriptor bLength = 0x08 bDescriptorType = 0x0b bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x08, 0x0b, 0x00, 0x02, 0xe0, 0x01, 0x03, 0x0c Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0003 iInterface = 0x000a <RNDIS Communications Control> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x01 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x00 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x00, 0x01 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0008 bInterval = 0x0009 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x000b <RNDIS Ethernet Data> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Additional Descriptor bLength = 0x08 bDescriptorType = 0x0b bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x08, 0x0b, 0x02, 0x02, 0x02, 0x02, 0x01, 0x09 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0002 bInterfaceProtocol = 0x0001 iInterface = 0x0007 <CDC Abstract Control Model (ACM)> Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x05, 0x24, 0x00, 0x10, 0x01 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x01 RAW dump: 0x00 | 0x05, 0x24, 0x01, 0x00, 0x03 Additional Descriptor bLength = 0x04 bDescriptorType = 0x24 bDescriptorSubType = 0x02 RAW dump: 0x00 | 0x04, 0x24, 0x02, 0x02 Additional Descriptor bLength = 0x05 bDescriptorType = 0x24 bDescriptorSubType = 0x06 RAW dump: 0x00 | 0x05, 0x24, 0x06, 0x02, 0x03 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0084 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x0009 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x000a <CDC-data> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0008 <CDC ACM Data> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 4 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0004 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0085 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 5 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0005 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff <Vendor specific> bInterfaceSubClass = 0x0042 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0086 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0004 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000
-
If it doesn't show up as an interface already (e.g.
ue0
) then probably not.We don't include all of the necessary drivers for tethering: https://redmine.pfsense.org/issues/7467
-
Thanks for help
i copied if_urndis.ko from freebsd 11 release 1 ISO to my pfsense /boot/modules and /boot/kernel folder and run command
kldload if_urndis
ref : https://forums.freebsd.org/threads/if_urndis-ko.61979/
-
Most of the android phones should work that way, you just need to turn on the connection sharing via USB on the phone and the urndis driver will pick it up as an ethernet connection that uses standard DHCP for configuration.
-
You can load that automatically at boot by including in /boot/loader.conf.local:
if_urndis_load='yes'
You will still hit the old issues of failing to boot if that interface is assigned and the phone gets disconnected though.
Steve