Multiple vlans on WAN (inet & iptv) - 1 NIC only
-
Hi everybody
I have nightmare with my FTTH - fiber installation. I want to use pfSense as firewall/router but i only have 1 nic and a vlan switch (hp procurve 1810-8g) i used wireshark to sniff the different vlans and found out that i need to use vlan 40 from the fiberbox til get connected to the internet. i do not use the iptv!
So the config for my vlans says:WAN: vlan 40
LAN: vlan 50https://forum.pfsense.org/index.php?topic=59041.0
I have tried to use this topic as guide, but no luck. i am pulling an ipaddress for IPTV, not for the internet :'(i have set the vlans on the console as WAN:em0_vlan40 , LAN:em0_vlan50.
What am i doing wrong?
-
Okay so i got it to work 8)
Switch config:
Port 1 ISP/FTTH box -> Tagged vlan 40
Port 2 Pfsense -> Tagged vlan 40,50
Port 3 - 8 -> Untagged vlan 50pFsense console:
Wan: em0_vlan40
Lan: em0_vlan50i hope it is the right way to do it :)