Redirection Traffic
-
Are you using a proxy and want to send them to a block page? If browser sends traffic to 1.2.3.4 and gets an answer from 192.168.1.100 its not going to accept that answer.
-
@johnpoz i don't have a proxy in my network. but , why browser not accept the answer when he get an answer from local ip ?
-
I can't do anythink for resolve this problem ?
-
How did you try and do it? Your talking just http right, not https?
I just did a port forward on lan with dest 8.8.8.8 http, goes to 192.168.3.10 this is my pihole.. I then hit http://8.8.8.8 and get this
But then again my client is on 192.168.9/24 not the same segment that server I am redirecting it too is on. In such a case pfsense does a bit of magic.. But when the source IP is on the same segment as your server your trying to redirect too - you could have problems.
-
@johnpoz https traffic
-
@big_bill said in Redirection Traffic:
@johnpoz https traffic
You could have told this right away. Are you 'forgetting' more info, like, as asked already : devices are on the same LAN segment, or not ?
Please detail your questions. The quality of the replies depend on it.Btw : https traffic can't be redirected. At least, not on a network like "Internet".
Example : if a user typedhttps://1.2.3.4and you managed to redirect this request to a device on your LAN (or where ever else on the net) and this connection give back a certificate (it should, we are talking https here), it must contain "1.2.3.4" as a "alternative subject name".
And that, simply said, just can't be done.edit : another example :
A user types :https://4.5.6.7and yu direct him to https:/:www.google.com then the browser well yell - because the browser inspects the certifcate, these "alternative subject name" buried into the certicate.
They are visible :
and as you can see, this is not "4.5.6.7".
The browser will show "Game over".
Btw : a question : since when user type really "real" IP address ?
-
The devices are not on the same LAN : one have a public IP (like 8.8.8.8) and auther (server) have a local IP (the same range with my computer)
When user tape or click on link with the public IP address, he should be redirected to the local IP.
-
Please HELP !!!
-
The post above from @johnpoz does exactly what you were asking for.
-
@gertjan dosen't work
Firewall -> NAT -> Port ForwardInterface : LAN
Protocol : TCP/UDP
Source : *
Destination : - type = Single host , Adress/Mask = ip public
Destination port range : http
Redirect target IP : 192.168.1.X
Redirect target port : https
NAT reflection : Use system default -
This :
@big_bill said in Redirection Traffic:Destination port range : http
Redirect target IP : 192.168.1.X
Redirect target port : httpswill never work.
redirecting http to https is a fail ... and needles to ask : this will never work.
So I tried what @johnpoz said :
192.168.2.2 (port 80 - no SSL) is a GUI access of one of my AP.
It works !! I typed :
and the AP GUI page opened
I'm visiting from my LAN, a device with IP 192.168.1.100
192.168.2, the AP, is on my OPT1 interfaceAgain : forget about redirecting https. Learn about the word MITM (Google it up - have a look at Wiki pages or search on this forum, and you'll see).
-
Its not going to work for https.. And if you redirect to the same lan, even if http I don't think it will work because the client will see answer from wrong IP/mac.. When you forward it through router you have go between and to the client it looks like came from 8.8.8.8 in my scenario..
But when are on same network you end up with this... I changed the port forward to point to 192.168.9.8
As you see .100 sent to 8.8.8.8 but it got answer from 192.168.9.8 - which sorry its not going to accept..
So for something like this to work with http even - again https is not going to work.. Unless the web server your sending to has the public IP your sending too i the SAN AND -- the client trusts the CA that signed that cert.
You would have to source nat the traffic to be looking like it came from pfsense IP on this network, and then pfsense would have to send it back to your client looking like it came from 8.8.8.8..
Why exactly are you looking to do this? Maybe your just going down the wrong rabbit hole for whatever issue your trying to fix?
-
@gertjan i tried with http
the browser saied : ERR_CONNECTION_TIMED_OUT
-
My server sends URLs containing URLs using its local IP address, but our external clients do not have access with this IP.
i would perform the redirection:
outside (WAN), redirect to our public IP
in local (LAN), redirect to our local IPi have configure the server to send the notification with the public ip (for the external client)
but in the lan side ; i can't access to this IP
-
If you have a local server with private IP, clients on Internet must connect to a public IP, and you need to NAT that to your private IP server.
And clients in the local lan, must connect to private IP directly.To use same hostname in both cases like "host.domain.tld" you must setup your DNS, and you can override that entry to solve to private IP for LAN users, but to public IP for external users.
-
So all you need it port forward for this to work if clients are hitting your public IP on your wan to your lan.
I took this as you were wanting local users to do this.. If this is outside users this is simple port forward. If you want your users to hit your OUTSIDE ip and get reflected back in that is nat reflection.
But the better solution is to use dns, and have your users resolve www.whatever.tld that points to your public IP and have that resolve locally to your server on your private IP address..
What sort of notification are you sending?? you should never hard code IP.. Use FQDN..
-
@elkato How do this with pfsense
-
NAT : https://www.netgate.com/docs/pfsense/nat/forwarding-ports-with-pfsense.html
DNS : Start here https://www.netgate.com/docs/pfsense/dns/unbound-dns-resolver.html
