Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Cannot route IPv6 - Frustrated

    Scheduled Pinned Locked Moved IPv6
    38 Posts 5 Posters 4.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      johnnybinator @IsaacFL
      last edited by

      @IsaacFL

      When I set Track interface on LAN it doesn't get an IP address. I still am getting an IPv6 address on WAN.

      IsaacFLI 1 Reply Last reply Reply Quote 0
      • J
        johnnybinator
        last edited by

        Destination Gateway Flags Netif Expire
        default 96-77-17-178-stati UGS igb0
        10.200.0.0/24 172.16.0.253 UGS igb1
        10.200.1.254 link#2 UHS lo0
        10.200.1.254/32 link#2 U igb1
        xx.xx.17.176/30 link#1 U igb0
        xx-xx-17-177-stati link#1 UHS lo0
        localhost link#4 UH lo0
        172.16.0.0/16 link#2 U igb1
        pfSense link#2 UHS lo0

        Internet6:
        Destination Gateway Flags Netif Expire
        default fe80::fc91:14ff:fe UGS igb0
        localhost link#4 UH lo0
        xxxx:xxxx:xx::c000: link#1 U igb0
        xxxx:xxxx:xx::c000: link#1 UHS lo0
        xxxx:xxxx:xx::c000: link#1 UHS lo0
        fe80::fc91:14ff:fe fe80::fc91:14ff:fe UGHS igb0
        fe80::%igb0/64 link#1 U igb0
        fe80::21b:21ff:fe7 link#1 UHS lo0
        fe80::%igb1/64 link#2 U igb1
        fe80::1:1%igb1 link#2 UHS lo0
        fe80::%lo0/64 link#4 U lo0
        fe80::1%lo0 link#4 UHS lo0

        1 Reply Last reply Reply Quote 0
        • IsaacFLI
          IsaacFL @johnnybinator
          last edited by

          @johnnybinator said in Cannot route IPv6 - Frustrated:

          @IsaacFL

          When I set Track interface on LAN it doesn't get an IP address. I still am getting an IPv6 address on WAN.

          from the way picture shows it looks like, it is all done in the Cisco. It is just a point to point connection from the pfsense to cisco? You said Cisco does layer2/3. Layer 3 includes ipv6, so the Cisco has to be configured to do the routing in your case.

          Your best bet is to hook a pc to the pfsense LAN interface and see that it is able to ping the internet.

          J 1 Reply Last reply Reply Quote 0
          • J
            johnnybinator @IsaacFL
            last edited by

            @isaacfl
            You know, that's a good idea. I hadn't thought of that. Thanks.

            IsaacFLI 1 Reply Last reply Reply Quote 0
            • IsaacFLI
              IsaacFL @johnnybinator
              last edited by

              @johnnybinator said in Cannot route IPv6 - Frustrated:

              @isaacfl
              You know, that's a good idea. I hadn't thought of that. Thanks.

              Have you been using pfsense for awhile, so it is only ipv6 you are struggling with? or are you new to pfsense?

              Will help me to know that.

              J 1 Reply Last reply Reply Quote 0
              • J
                johnnybinator @IsaacFL
                last edited by

                @isaacfl

                I've been running pfSense for 5 + years. I love it. IPv6 is pretty new to me. I can see there's more than a small amount to learn.

                I've been in IT for 25 years, I usually adapt to new things easier than this. Maybe I'm getting old.

                IsaacFLI JKnottJ 2 Replies Last reply Reply Quote 0
                • IsaacFLI
                  IsaacFL @johnnybinator
                  last edited by

                  @johnnybinator said in Cannot route IPv6 - Frustrated:

                  @isaacfl

                  I've been running pfSense for 5 + years. I love it. IPv6 is pretty new to me. I can see there's more than a small amount to learn.

                  I've been in IT for 25 years, I usually adapt to new things easier than this. Maybe I'm getting old.

                  ok I would try the get a pc working on the lan side of the pfsense then. I would bet it is probably working, then we would need to figure out how to get it to work in your configuration.

                  I have only been using pfsense for a few months, so new on its idiosynchrocies, but I have been working with ipv6 for a few years now. So I am more familiar with ipv6 than pfsense.

                  I won't be able to spend anymore time today, but I will say that ipv6 routing isn't as difficult as ipv4. The difference is ipv6 uses the link local address and multicast on each interface to do the actual routing.

                  1 Reply Last reply Reply Quote 0
                  • JKnottJ
                    JKnott @johnnybinator
                    last edited by

                    @johnnybinator said in Cannot route IPv6 - Frustrated:

                    @isaacfl

                    I've been running pfSense for 5 + years. I love it. IPv6 is pretty new to me. I can see there's more than a small amount to learn.

                    I've been in IT for 25 years, I usually adapt to new things easier than this. Maybe I'm getting old.

                    For the most part, IPv6 works the same as IPv4, but with longer addresses. However, there are some differences, such as ARP being replaced with neighbour discovery, default gateway and prefix being automagically configured with router advertisements. There are other things for improved performance, such as fix length headers and extension headers

                    One book I find is a good reference is IPv6 Essentials, from O'Reilly.

                    PfSense running on Qotom mini PC
                    i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
                    UniFi AC-Lite access point

                    I haven't lost my mind. It's around here...somewhere...

                    1 Reply Last reply Reply Quote 0
                    • DerelictD
                      Derelict LAYER 8 Netgate
                      last edited by Derelict

                      What is your delegated /56? Are they actually delegating it to you?

                      Check the Start DHCP6 client in debug mode checkbox on WAN, Save, and Apply, then examine the DHCP logs. You should see what you want to by searching for message IA_PD or process dhcp6c. What is it showing for a /56 delegated?

                      You would then need to route a larger prefix of that, say a /60 to the switch then add /64s to the individual switch layer 3 interfaces and configure DHCP6, SLAAC, etc. on the switch (Just like IPv4).

                      Chattanooga, Tennessee, USA
                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                      J 1 Reply Last reply Reply Quote 0
                      • J
                        johnnybinator @Derelict
                        last edited by

                        @derelict

                        This is what I get (I do get an address):

                        Sep 1 10:37:43 dhcp6c 8607 failed to parse configuration file
                        Sep 1 10:37:43 dhcp6c 8607 called
                        Sep 1 10:37:43 dhcp6c 8607 /var/etc/dhcp6c_wan.conf:3 IA_PD (0) is not defined
                        Sep 1 10:37:43 dhcp6c 8607 called
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of closure [}] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <13>begin of closure [{] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <13>[0] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <13>[na] (2)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[id-assoc] (8)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of closure [}] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>comment [# we'd like some nameservers please] (35)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>["/var/etc/dhcp6c_wan_script.sh"] (31)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[script] (6)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[domain-name] (11)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[request] (7)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[domain-name-servers] (19)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[request] (7)
                        Sep 1 10:37:43 dhcp6c 8607 <3>comment [# request prefix delegation] (27)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[0] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[ia-pd] (5)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[send] (4)
                        Sep 1 10:37:43 dhcp6c 8607 <3>comment [# request stateful address] (26)
                        Sep 1 10:37:43 dhcp6c 8607 <3>end of sentence [;] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[0] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[ia-na] (5)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[send] (4)
                        Sep 1 10:37:43 dhcp6c 8607 <3>begin of closure [{] (1)
                        Sep 1 10:37:43 dhcp6c 8607 <5>[igb0] (4)
                        Sep 1 10:37:43 dhcp6c 8607 <3>[interface] (9)
                        Sep 1 10:37:43 dhcp6c 8607 skip opening control port
                        Sep 1 10:37:43 dhcp6c 8607 failed initialize control message authentication
                        Sep 1 10:37:43 dhcp6c 8607 failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
                        Sep 1 10:37:43 dhcp6c 8607 extracted an existing DUID from /var/db/dhcp6c_duid: BLAH BLAH

                        1 Reply Last reply Reply Quote 0
                        • IsaacFLI
                          IsaacFL
                          last edited by

                          I assume you have a firewall rule to pass the ipv6 traffic on your LAN interface?

                          0_1535822333484_Capture.PNG

                          J 1 Reply Last reply Reply Quote 0
                          • J
                            johnnybinator @IsaacFL
                            last edited by

                            @isaacfl
                            alt text

                            IsaacFLI 1 Reply Last reply Reply Quote 0
                            • DerelictD
                              Derelict LAYER 8 Netgate
                              last edited by Derelict

                              Yeah something is not right. Post your WAN interface configuration page.

                              My last renewal for reference. Note the IA_PD being assigned.

                              Sep 1 03:55:10 	dhcp6c 	44071 	IA timeout for PD-0, state=ACTIVE
Sep 1 03:55:10 	dhcp6c 	44071 	reset a timer on igb0, state=RENEW, timeo=0, retrans=10220
Sep 1 03:55:10 	dhcp6c 	44071 	Sending Renew
Sep 1 03:55:10 	dhcp6c 	44071 	a new XID (a5356f) is generated
Sep 1 03:55:10 	dhcp6c 	44071 	set client ID (len 14)
Sep 1 03:55:10 	dhcp6c 	44071 	set server ID (len 14)
Sep 1 03:55:10 	dhcp6c 	44071 	set elapsed time (len 2)
Sep 1 03:55:10 	dhcp6c 	44071 	set option request (len 4)
Sep 1 03:55:10 	dhcp6c 	44071 	set IA_PD prefix
Sep 1 03:55:10 	dhcp6c 	44071 	set IA_PD
Sep 1 03:55:10 	dhcp6c 	44071 	send renew to ff02::1:2%igb0
Sep 1 03:55:10 	dhcp6c 	44071 	receive reply from fe80::2e86:d2ff:fe89:2019%igb0 on igb0
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option client ID, len 14
Sep 1 03:55:10 	dhcp6c 	44071 	DUID: 00:01:00:xx:xx:xx:xx:xx:00:08:a2:0a:59:41
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option server ID, len 14
Sep 1 03:55:10 	dhcp6c 	44071 	DUID: 00:01:00:xx:xx:xx:xx:xx:f8:bc:12:3e:b6:9c
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option DNS, len 32
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option IA_PD, len 47
Sep 1 03:55:10 	dhcp6c 	44071 	IA_PD: ID=0, T1=43200, T2=69120
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option status code, len 2
Sep 1 03:55:10 	dhcp6c 	44071 	status code: success
Sep 1 03:55:10 	dhcp6c 	44071 	get DHCP option IA_PD prefix, len 25
Sep 1 03:55:10 	dhcp6c 	44071 	IA_PD prefix: 2600:dabb:ad00:bc00::/56 pltime=86400 vltime=86400
Sep 1 03:55:10 	dhcp6c 	44071 	dhcp6c Received INFO
Sep 1 03:55:10 	dhcp6c 	44071 	nameserver[0] 2001:578:3f::30
Sep 1 03:55:10 	dhcp6c 	44071 	nameserver[1] 2001:578:3f:1::30
Sep 1 03:55:10 	dhcp6c 	44071 	update an IA: PD-0
Sep 1 03:55:10 	dhcp6c 	44071 	status code for PD-0: success
Sep 1 03:55:10 	dhcp6c 	44071 	update a prefix 2600:dabb:ad00:bc00::/56 pltime=34359824768, vltime=34359824768
Sep 1 03:55:10 	dhcp6c 	44071 	executes /var/etc/dhcp6c_wan_script.sh
Sep 1 03:55:10 	dhcp6c 		dhcp6c renew, no change - bypassing update on igb0
Sep 1 03:55:10 	dhcp6c 	44071 	script "/var/etc/dhcp6c_wan_script.sh" terminated
Sep 1 03:55:10 	dhcp6c 	44071 	removing an event on igb0, state=RENEW
Sep 1 03:55:10 	dhcp6c 	44071 	got an expected reply, sleeping.
Sep 1 03:55:16 	dhcp6c 	44071 	IA timeout for NA-0, state=ACTIVE
Sep 1 03:55:16 	dhcp6c 	44071 	reset a timer on igb0, state=RENEW, timeo=0, retrans=9710
Sep 1 03:55:16 	dhcp6c 	44071 	Sending Renew
Sep 1 03:55:16 	dhcp6c 	44071 	a new XID (93002a) is generated
Sep 1 03:55:16 	dhcp6c 	44071 	set client ID (len 14)
Sep 1 03:55:16 	dhcp6c 	44071 	set server ID (len 14)
Sep 1 03:55:16 	dhcp6c 	44071 	set IA address
Sep 1 03:55:16 	dhcp6c 	44071 	set identity association
Sep 1 03:55:16 	dhcp6c 	44071 	set elapsed time (len 2)
Sep 1 03:55:16 	dhcp6c 	44071 	set option request (len 4)
Sep 1 03:55:16 	dhcp6c 	44071 	send renew to ff02::1:2%igb0
Sep 1 03:55:17 	dhcp6c 	44071 	receive reply from fe80::2e86:d2ff:fe89:2019%igb0 on igb0
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option client ID, len 14
Sep 1 03:55:17 	dhcp6c 	44071 	DUID: 00:01:00:xx:xx:xx:xx:xx:00:08:a2:0a:59:41
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option server ID, len 14
Sep 1 03:55:17 	dhcp6c 	44071 	DUID: 00:01:00:xx:xx:xx:xx:xx:f8:bc:12:3e:b6:9c
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option DNS, len 32
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option identity association, len 46
Sep 1 03:55:17 	dhcp6c 	44071 	IA_NA: ID=0, T1=43200, T2=69120
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option status code, len 2
Sep 1 03:55:17 	dhcp6c 	44071 	status code: success
Sep 1 03:55:17 	dhcp6c 	44071 	get DHCP option IA address, len 24
Sep 1 03:55:17 	dhcp6c 	44071 	IA_NA address: 2600:abba:daba:1c00:f482:dfe0:8871:7c09 pltime=86400 vltime=86400
Sep 1 03:55:17 	dhcp6c 	44071 	dhcp6c Received INFO
Sep 1 03:55:17 	dhcp6c 	44071 	nameserver[0] 2001:578:3f::30
Sep 1 03:55:17 	dhcp6c 	44071 	nameserver[1] 2001:578:3f:1::30
Sep 1 03:55:17 	dhcp6c 	44071 	update an IA: NA-0
Sep 1 03:55:17 	dhcp6c 	44071 	status code for NA-0: success
Sep 1 03:55:17 	dhcp6c 	44071 	update an address 2600:abba:daba:1c00:f482:dfe0:8871:7c09 pltime=86400, vltime=140733193474432
Sep 1 03:55:17 	dhcp6c 	44071 	add an address 2600:abba:daba:1c00:f482:dfe0:8871:7c09/128 on igb0
Sep 1 03:55:17 	dhcp6c 	44071 	executes /var/etc/dhcp6c_wan_script.sh
Sep 1 03:55:17 	dhcp6c 		dhcp6c renew, no change - bypassing update on igb0
Sep 1 03:55:17 	dhcp6c 	44071 	script "/var/etc/dhcp6c_wan_script.sh" terminated
Sep 1 03:55:17 	dhcp6c 	44071 	removing an event on igb0, state=RENEW
Sep 1 03:55:17 	dhcp6c 	44071 	got an expected reply, sleeping.

                              Chattanooga, Tennessee, USA
                              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                              Do Not Chat For Help! NO_WAN_EGRESS(TM)

                              1 Reply Last reply Reply Quote 0
                              • DerelictD
                                Derelict LAYER 8 Netgate @johnnybinator
                                last edited by

                                @johnnybinator

                                @johnnybinator said in Cannot route IPv6 - Frustrated:

                                @johnpoz
                                I'm obviously new to this stuff

                                What I was showing was that I can ping6 2600:: from my router. If that works, there's a route set. Right?

                                For the interface address/network, yes. But the /56 you need to route to the inside router is a completely different thing.

                                Chattanooga, Tennessee, USA
                                A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                1 Reply Last reply Reply Quote 0
                                • IsaacFLI
                                  IsaacFL @johnnybinator
                                  last edited by

                                  @johnnybinator said in Cannot route IPv6 - Frustrated:

                                  @isaacfl
                                  alt text

                                  On your ipv6 pass rule, you might want to change source from LAN net to any for testing.

                                  If you are going to actually be implementing the routing on your Cisco you will need to allow your entire /56 as a source. Remember we aren't doing NAT with ipv6.

                                  What I would do is create a firewall alias, LOCAL_SUBNETS_v6 with your ipv6 prefix /56.

                                  Then in your firewall rule, use LOCAL_SUBNETS_v6 as the source.

                                  1 Reply Last reply Reply Quote 0
                                  • J
                                    johnnybinator
                                    last edited by

                                    @isaacfl said in Cannot route IPv6 - Frustrated:

                                    LOCAL_SUBNETS_v6

                                    HILARIOUS! That was is! The rule change fixed it. I used LAN NET because it was set up that way for the IPv4 rule.

                                    Thanks for walking through this mess with me. I Learned a lot.

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post
                                    Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.