memstick-2.4.4-DEVELOPMENT- not bootable
-
I would like to do a fresh clean of pfSense-CE-memstick-2.4.4-DEVELOPMENT but have been unsuccessful in creating a bootable usb or cd, I have download the latest version pfSense-CE-memstick-2.4.4-DEVELOPMENT-amd64-20180904-1004 and was not able to creating a bootable usb or cd, this is not my first time trying to create a bootable i have been trying for a while now with no success, has anyone been able to create a bootable usb or cd from the memstick-2.4.4-DEVELOPMENT if so what software did you use, I have tried IsoBurner, burncdcc, ImgBurn and others that will burn the cd but when i try to boot from the cd i get
cd loader 1.2
building the boot loader arguments
looking up/boot/loader ... found
relocating the loader and the BTX
starting the BTX loader
Btx Loader 1.00 Btx version is 1.02
int=00000006 err-00000000 efl-00010202
and other errors
BTX halted
and for the usb, no errors just won’t boot i tried 5 brands of usb drives with no luck i tried etcher, rufus and some others with no luck. -
What hardware are you installing on? Is it UEFI? Could it be?
That looks like the output from a CD boot, you just see no boot at all from USB? Not recognised as a bootable device?
Steve
-
Is it UEFI? Could it be?
I changed the boot in the bios to dual boot ( legacy and uefi) and the cd boot
pfSense-CE-memstick-2.4.4-DEVELOPMENT-amd64-20180904-1004 fresh install with no problems thank you.That looks like the output from a CD boot
yes it is the output of a cdyou just see no boot at all from USB?
yes see no boot at all from usb -
It should see the USB image as bootable if you have UEFI enbabled.
That looks like a regression though. Thanks for reporting.Steve