Alcatel Onetouch 4G L850V LTE USB modem it is not visible in the PPP configuration

yanlb

I buy this LTE modem because it is in the list of moden 3G / 4G compatible at https://www.netgate.com/docs/pfsense/cellular/known-working-3g-4g-modems.html

My idea is to use this device as a backup WAN line connection.

Thanks

stephenw10

What do you have in that config file?

Unfortunately a lot of manufacturers change the firmware or even hardware of devices without changing the model name.

That device is listed here as something different:
https://github.com/pfsense/FreeBSD-src/blob/293707af843ce1b4208eed3b8427b72356ea06f0/sys/dev/usb/usbdevs#L4415

You may be able to change it's mode permanently in another OS.

Steve

yanlb

Hello Stephenw:

When I connect the dongle:

Sep 20 08:37:49	kernel		ugen0.2: <Alcatel MobileBroadBand> at usbus0
Sep 20 08:37:49	kernel		umass0 on uhub1
Sep 20 08:37:49	kernel		umass0: <Mass Storage> on usbus0
Sep 20 08:37:49	kernel		da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
Sep 20 08:37:49	kernel		da0: <ONETOUCH ESTORIL 2.31> Removable Direct Access SCSI-2 device
Sep 20 08:37:49	kernel		da0: 40.000MB/s transfers
Sep 20 08:37:49	kernel		da0: Attempt to query device size failed: NOT READY, Medium not present
Sep 20 08:37:49	kernel		da0: quirks=0x2<NO_6_BYTE>

If you notice the system recognizes the dongle as if it were a usb memory
And...

cat fstab
/dev/gptid/5773b079-96ac-11e7-bc1b-000db94b25b4 /       ufs     rw      1       1
/dev/gptid/5776e157-96ac-11e7-bc1b-000db94b25b4 none    swap    sw      0       0

/etc: camcontrol devlist
<SATA SSD SBFM01.1>                at scbus0 target 0 lun 0 (pass0,ada0)
<ONETOUCH ESTORIL 2.31>            at scbus2 target 0 lun 0 (da0,pass1)

And the configuration files have not been touched and I am not config PPP.

Any suggestions?
Regards

stephenw10

You are using the configuration file /usr/local/share/usb_modeswitch/1bbb:f000 with usb_modeswitch though.
What's in that file?

Steve

yanlb

@stephenw10
I use that command to try to change the way of working of the dongle since this file is the one according to the vendor and the product in question. That's the command to change mode of work which is described on https://www.netgate.com/docs/pfsense/cellular/known-working-3g-4g-modems.html#modems-reported-to-work-as-ethernet-devices, but for Alcatel L850v theoretically
.
Regards
Yanlb

stephenw10

Right I understand that. It looks like you need to switch the device to PID 0x0017.

But your command is referencing a config file here /usr/local/share/usb_modeswitch/1bbb:f000 what have you put in that file for usb_modeswitch to use? Or what is in it by default?

Steve

stephenw10

Or maybe pid 0x0195 for newer versions.

http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?p=15496#p15496

Looks like that will give you an RNDIS device which you should be able to use with that kernel module loaded.

Steve

yanlb

By default. And I tried (to test) with 1bbb:000f , 1bbb:00ca , 1bbb:011f , 1bbb:022c , 1bbb:025e , 1bbb:f000 , 1bbb:f017 , 1bbb:f052 and the same result.

@stephenw10 said in Alcatel Onetouch 4G L850V LTE USB modem it is not visible in the PPP configuration:

Right I understand that. It looks like you need to switch the device to PID 0x0017.
But your command is referencing a config file here /usr/local/share/usb_modeswitch/1bbb:f000 what have you put in that file for usb_modeswitch to use? Or what is in it by default?

yanlb

@stephenw10

Very interesting but it generates this error:

 usb_modeswitch                                                                                -W -v 1bbb -p f000 -V 1bbb -P 0195 --message-content 55534243123456788000000080000606f504025270                                                                               00000000000000000000
 Take all parameters from the command line


* usb_modeswitch: handle USB devices with multiple modes
* Version 2.5.2 (C) Josua Dietze 2017
* Based on libusb1/libusbx

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=  0x1bbb
DefaultProduct= 0xf000
TargetVendor=   0x1bbb 
TargetProduct=  0x0195

MessageContent="55534243123456788000000080000606f50402527000000000000000000000"

 Look for target devices ...
 found USB ID 0000:0000
 found USB ID 0000:0000
 found USB ID 0438:7900
 found USB ID 1bbb:f000
 vendor ID matched
 No devices in target mode or class found
Look for default devices ...
found USB ID 0000:0000
found USB ID 0000:0000
found USB ID 0438:7900
found USB ID 1bbb:f000
vendor ID matched
product ID matched
Found devices in default mode (1)
Access device 002 on bus 000
Get the current device configuration ...
Determining the active configuration failed (error -5). Abort

And my system is:
2.4.3-RELEASE-p1 (amd64)
FreeBSD 11.1-RELEASE-p10

Looks like that will give you an RNDIS device which you should be able to use with that kernel module loaded.

Yes, that's what I think. The system recognizes it as if it were another device, a USB memory.

stephenw10

That was the output of running at the command line without a referenced config file?

It looks like it's having a hard time reading the config value though I'm not sure why since usbconfig is reporting it. Potentially some Linuxism.

It has a uSD card slot so it should always appeat as a storage device in addition to whatever else it presents.

Steve

yanlb

No, that was the output of running with 1bbb:f000. I'm still trying to make it work but I have not succeeded
Thank you in advance for your help

stephenw10

Have you upgraded to 2.4.4 yet? Are you seeing the same error there?

Steve

milew

I have modem Alcatel OneTouch l850v
idVendor=0x1bbb
idProduct=0x0195
PFSense version 2.4.4-RELEASE-p1

This modem work if load module if_urndis.ko. I copy this module from another FreeBsd installed system 11.2. This file is in /etc/boot/kernel/if_urndis.ko
After load module modem is ue0: network interface, and autoconnect to Internet.
You must disable PIN to sim card.