Static destination IP translation
-
Hi,
Im want to setup a destination with pool so I can translate 172.16.10.0/24 to 10.0.0.0/24. For example: destination 172.16.10.5 get translated to 10.0.0.5 and destination 172.16.10.20 gets translated to 10.0.0.20 and so forth. I tried using outbound NAT, but this only translates the source IP.
Does Anyone have an idea how i can achieve this?
-
https://doc.pfsense.org/index.php/1:1_NAT
-
Thanks for the reply!
I tried that before and it did not work , see attachments.
The translation doesnt seem to happen.
msnetwork is the external intefac btw
-
No idea what's that second screenshot supposed to mean. It matches none of the 1:1 subnets, what exactly should get translated there?!
-
On what interface and in what direction do you want the destination translated?
-
Can you translate the outside local to outside global (cisco speak) address in pfSense?
Meaning if I have:
Host A1: 172.26.0.100
pfSense LAN: 172.26.0.1
pfSense WAN: 172.27.0.5
Host A1 attempts a connection to 10.0.0.5. Can pfSense translate that destination address from 10.0.0.5 to 172.16.10.5, while also translating the source address from 172.26.0.100 to 172.27.0.5 on its way out WAN?
-
I want the NAT translation to take place on the WAN interface. Basically i want the following to happen:
LAN Subnet 10.0.0.0/24
HostB on LAN: 10.0.0.5
HostC on LAN: 10.0.0.10WAN subnet: 192.168.190.0/24
WAN interface:192.168.190.10
HostA on WAN:192.168.190.20Host A has a static route to 172.16.10.0/24 with next hop 192.168.190.10
Host A attempts to connect with HostB on 172.16.10.5, pfsense(192.168.190.10) translates the destination to 10.0.0.5. HostB sends a reply back to 192.168.190.20(hostA) with source 10.0.0.5, pfsense(192.168.190.10) translates the source to 172.16.10.5.
Host A attempts to connect with HostC on 172.16.10.10, pfsense(192.168.190.10) translates the destination to 10.0.0.10. HostC sends a reply back to 192.168.190.20(hostA) with source 10.0.0.10, pfsense(192.168.190.10) translates the source to 172.16.10.10.
