CARP and Interface Missmatch
-
Hi there,
I have a Problem to run CARP on some Interfaces because it seems they are mixed.
I will show you my Setup with 2 pfSense Boxex:PF1 --------------------------------------------------------------------------- PF2
IGB0 = WAN (was wan) ------------------------------------------- IGB0 = WAN (was wan)
IGB1 = PLAN (was lan) -------------------------------------------- IGB1 = PLAN (was lan)
IGB2 = ILAN (was opt1) ------------------------------------------- IGB2 = ILAN (was opt1)
IGB3 = SYNC (was opt2) ------------------------------------------ IGB3 = SYNC (was opt2)
IGB4 = Unused (was opt3) --------------------------------------- IGB4 = Unused (was opt4)
IGB5 = Upstream (was opt4) ----------------------------------- IGB5 = Uptream (was opt5)In case of that Mixed naming it seems that i am not able to make CARP on IGB4 and IGB5 (opt naming does not match)
On PF2 there is a openvpn Interface on opt3.Is there any chance to make CARP on these interfaces by renaming the IDs or something link that?
Cheers
Daniel
-
You need to match exactly on both sides. If you have an OpenVPN interface on one, it should be on the other also.
-
Ahh i was able to make a "new" sorting by deleting the VPN interface ;)
Ok that was easy.
Thx to give some hints.