Auto configuration backup shows no backups
-
yes, yes, and yes. thanks
-
PM me the device key and I'll check the server logs.
-
Steve did check the server logs and there was nothing there. The router is communicating with the acb server when attempting to retrieve backups (and it can pull the backup list for my other router), but it is not sending any packets out when I trigger a backup (despite reporting success).
Anyone else seeing something like this?
-
@ericmc1 If you can copy/paste the device key from you "other" router into this one, and it lists the backups of that "other" router, it confirms that this router has never (successfully) made any backups.
Plug this into the PHP Command section of the Diagnostics->Commands page. How does do the working and non-working routers compare?
print_r($config['system']['acb']); -
The only difference between the two is that the router that is not backing up has a hint in the array, and the one that is successful does not.
-
Please visit the ACB page and see if you see any backups listed now. I made a test with your user key. You will NOT be able to view the backup, but you should see it listed.
-
yep, I see it. I tried to trigger one again but I still only see the test you did
-
Take a look at the System -> Logs page. On the System - General tab, do you see any entries such as this:
Nov 12 18:19:24 php /etc/rc.packages: Beginning configuration backup to .https://acb.netgate.com/save Nov 12 18:19:26 php /etc/rc.packages: End of configuration backup to https://acb.netgate.com/save (success). -
@EricMc1 Are your routers in a Multi WAN configuration? If so then I just resolved my problem and made notes here: https://forum.netgate.com/topic/137680/auto-configuration-backup-shows-no-backups-us-too.
-
yes, I see entries just like those.
Thanks for the pointer. I do have multiple WANs. I tried your suggestion of setting a DNS per gateway, but unfortunately that didn't work. I do run local DNS and the ACB service doesn't have any issue getting to the server for pulling the restore list. I also didn't have the errors in the log you had.
-
@steve_b said in Auto configuration backup shows no backups:
Beginning configuration backup
Please attempt another manual backup, then look for the file /tmp/backupdebug.txt
ACB uses PHP_curl to upload encrypted backups. Any errors reported by curl will appear in that file. -
@steve_b
okay, I'm seeing inconsistent behavior here and I haven't been able to pin down why.router 1 (the originally not working one):
While looking for the debug logs, I noticed that the log entries for success had disappeared. I traced this to a check for boot completion that was failing, preventing the backup from starting (this is a different issue. I also don't know why the boot is no longer finishing).I manually deleted the booting file so that the backup would run, and it started working. I then walked back the firewall and DNS config (and the debugging stuff that I had added in acb.php) that I had done before to try to get it to fail again, and it would not fail. So, I don't know what changed to make it work.
router 2 (the originally working one):
This one started exhibiting the behavior seen before on router 1 (backups report success in web ui, but they are not occurring). This one does have a backupdebug.txt indicating a timeout on the save. I can still ping and curl acb.netgate.com.