DHCP fails silently, but works on reboot of pfSense
-
@bjk said in DHCP fails silently, but works on reboot of pfSense:
@jimp As I am adding VLANs on the off-line x1541, I hit a snag. I was able to create the 163rd VLAN and select "Add" in the Interface Assignments, but now this latest VLAN I added isn't showing up in the Interface Assignments tab. If I go back to the VLANs tab, the VLAN I last created is there. When I try to delete the VLAN, I receive an error "This VLAN cannot be deleted because it is still being used as an interface". Yet it isn't showing up in the Interface list. I decided to reboot (after I saved the Config). Upon reboot, the last several VLANs were missing. I restored from the back up and was able to get back to where I was before the reboot (can see the VLAN but not the Interface).
@obelsen, you didn't run into any troubles adding all your VLANs? Have I hit some limitation here?I have not encountered this error.
-
There is no limit on the number of VLANs you can have in the GUI. I'm not quite sure what would have happened there, but I recall seeing anything like that before. Are you certain there wasn't some unintentional overlap? IIRC input validation prevents most obvious ways of causing duplicate entries but maybe something else was going on there.
Go to Diagnostics > Backup & Restore and check the config history at each point in the changes you made, see what was added when.
-
@jimp I've reviewed the interfaces a few times and cannot see any conflict or redundancies. Reviewing the XML, the VLAN and Interface are there, just doesn't show up in the UI.
I also stepped backwards in the configs a couple times to re-add the vlan and also tried adding a completely random vlan with the same result of it not showing up after adding in the interfaces.
From my experience, it appears I've hit a limit of not being able to add any more interfaces and have them show up in the UI... tho they are showing up in the XML -
This post is deleted! -
So exactly how many VLAN tags do you have in config.xml when they stop showing up?
And can you confirm which version of pfSense you are running on that device?
-
@jimp
Hardware XG-1541 running 2.4.4-RELEASE (amd64)
built on Thu Sep 20 09:33:19 EDT 2018
FreeBSD 11.2-RELEASE-p3The GUI stopped displaying after the 163 VLAN was created. Also, please recall, I rebooted after to see if something magic would happen. And it did. The GUI was now not evern showing the 162 VLANs Ihad previously created. I didn't count, but all I could see in the GUI for interfaces was more like ~155 VLANs. I restored the config from before the reboot and then I could see the 162 VLANs again in the GUI. At this time, I was not reviewing the XML to see what it had in it. But something wonky for sure going on with the GUI not displaying all interfaces.
btw, thank you very much for your help with this.
-
I generated a config with 250 VLANs (assigned, enabled, with DHCP) and so far they all show up everywhere. The console menu, the interfaces widget, the interfaces menu, the VLAN tab list, the DHCP server, even firewall rules.
I was able to reproduce some weirdness when applying a change to an interface, though. It's like it is very slowly going through each VLAN and touching it. PHP is maxing out a whole core, but it's only doing maybe one VLAN every 2 minutes. So at this rate it would take 8h20m to process them all. Fun. :-)
So I can at least open an issue for that part, which may be the original cause of this thread. Not sure what is taking so long to process them all, or why it's touching every VLAN when changing only one. Might not make -p1 but we'll see.
-
@jimp said in DHCP fails silently, but works on reboot of pfSense:
I generated a config with 250 VLANs (assigned, enabled, with DHCP) and so far they all show up everywhere. The console menu, the interfaces widget, the interfaces menu, the VLAN tab list, the DHCP server, even firewall rules.
I was able to reproduce some weirdness when applying a change to an interface, though. It's like it is very slowly going through each VLAN and touching it. PHP is maxing out a whole core, but it's only doing maybe one VLAN every 2 minutes. So at this rate it would take 8h20m to process them all. Fun. :-)
So I can at least open an issue for that part, which may be the original cause of this thread. Not sure what is taking so long to process them all, or why it's touching every VLAN when changing only one. Might not make -p1 but we'll see.
Ah I can see that being the issue. I haven't actually tried leaving it running for that long, since people around here don't know how to set static IPs for that duration :-)
-
I put in https://redmine.pfsense.org/issues/9115 for this for now. If I notice any other clues about how it misbehaves I'll drop them on there.
In the meantime you might be able to at least do the 16/11 trick after making a change to keep it running. It does seem to apply the intended change quickly, and then gets mired in doing something else after.
-
This sounds like a good lead. thank you for going thru the effort. Should I start a new thread concerning why my VLAN interfaces are not showing up in the GUI? Any other thoughts on this? Any suggestions on things to try to maybe understand what might be happening here? thx again
-
@bjk said in DHCP fails silently, but works on reboot of pfSense:
Should I start a new thread concerning why my VLAN interfaces are not showing up in the GUI? Any other thoughts on this? Any suggestions on things to try to maybe understand what might be happening here? thx again
Yeah that's a separate issue and I can't reproduce it here at all. I can't see why it would behave inconsistently either.
