Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    WAN interfaces fail to return after power outage

    Scheduled Pinned Locked Moved General pfSense Questions
    49 Posts 4 Posters 8.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Yes I see those. I don't see any arpresolve errors in there but I thought you may have seen some that aren't in that shot. That only shows 10s worth of logs.

      Steve

      1 Reply Last reply Reply Quote 0
      • P
        peter_richardson
        last edited by peter_richardson

        yeah that's the last few entries from it booting, then there's nothing else after that.

        Here's the output from ifconfig -v but according to www.diffchecker.com there's no difference in the output whether it's working properly or not:

        Petes-MBP:~ Peter$ ifconfig -v
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 index 1
 	eflags=12000000<ECN_DISABLE,SENDLIST>
 	options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
 	inet 127.0.0.1 netmask 0xff000000 
 	inet6 ::1 prefixlen 128 
 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
 	nd6 options=201<PERFORMNUD,DAD>
 	link quality: 100 (good)
 	state availability: 0 (true)
 	timestamp: disabled
 	qosmarking enabled: no mode: none
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 index 2
 	eflags=1000000<ECN_ENABLE>
 	state availability: 0 (true)
 	qosmarking enabled: no mode: none
stf0: flags=0<> mtu 1280 index 3
 	eflags=1000000<ECN_ENABLE>
 	state availability: 0 (true)
 	qosmarking enabled: no mode: none
XHC20: flags=0<> mtu 0 index 4
 	eflags=41000000<ECN_ENABLE,FASTLN_ON>
 	state availability: 0 (true)
 	qosmarking enabled: yes mode: none
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 index 5
 	eflags=41200880<TXSTART,ARPLL,NOACKPRI,ECN_ENABLE,FASTLN_ON>
 	ether a0:99:9b:14:37:55 
 	inet6 fe80::42d:fd6:9a6d:c5ec%en0 prefixlen 64 secured scopeid 0x5 
 	inet 10.20.63.133 netmask 0xffffff00 broadcast 10.20.63.255
 	nd6 options=201<PERFORMNUD,DAD>
 	media: autoselect
 	status: active
 	type: Wi-Fi
 	link quality: 100 (good)
 	state availability: 0 (true)
 	scheduler: FQ_CODEL (driver managed)
 	link rate: 53.95 Mbps
 	qosmarking enabled: yes mode: none
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 index 6
 	eflags=41000080<TXSTART,ECN_ENABLE,FASTLN_ON>
 	ether 02:99:9b:14:37:55 
 	media: autoselect
 	status: inactive
 	type: Wi-Fi
 	state availability: 0 (true)
 	scheduler: FQ_CODEL (driver managed)
 	link rate: 10.00 Mbps
 	qosmarking enabled: yes mode: none
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484 index 7
 	eflags=413e0080<TXSTART,LOCALNET_PRIVATE,ND6ALT,RESTRICTED_RECV,AWDL,NOACKPRI,ECN_ENABLE,FASTLN_ON>
 	ether 0a:60:dd:0c:a4:0f 
 	inet6 fe80::860:ddff:fe0c:a40f%awdl0 prefixlen 64 scopeid 0x7 
 	nd6 options=201<PERFORMNUD,DAD>
 	media: autoselect
 	status: active
 	type: Wi-Fi
 	state availability: 0 (true)
 	scheduler: FQ_CODEL (driver managed)
 	link rate: 10.00 Mbps
 	qosmarking enabled: yes mode: none
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 index 8
 	eflags=41000080<TXSTART,ECN_ENABLE,FASTLN_ON>
 	options=60<TSO4,TSO6>
 	ether 6a:00:00:9f:55:50 
 	media: autoselect <full-duplex>
 	status: inactive
 	type: Ethernet
 	state availability: 0 (true)
 	scheduler: FQ_CODEL 
 	qosmarking enabled: yes mode: none
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 index 9
 	eflags=41000080<TXSTART,ECN_ENABLE,FASTLN_ON>
 	options=60<TSO4,TSO6>
 	ether 6a:00:00:9f:55:51 
 	media: autoselect <full-duplex>
 	status: inactive
 	type: Ethernet
 	state availability: 0 (true)
 	scheduler: FQ_CODEL 
 	qosmarking enabled: yes mode: none
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 index 10
 	eflags=41000000<ECN_ENABLE,FASTLN_ON>
 	options=63<RXCSUM,TXCSUM,TSO4,TSO6>
 	ether 6a:00:00:9f:55:50 
 	Configuration:
 		id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
 		maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
 		root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
 		ipfilter disabled flags 0x2
 	member: en1 flags=3<LEARNING,DISCOVER>
 	        ifmaxaddr 0 port 8 priority 0 path cost 0
 	        hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
 	member: en2 flags=3<LEARNING,DISCOVER>
 	        ifmaxaddr 0 port 9 priority 0 path cost 0
 	        hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
 	media: <unknown type>
 	status: inactive
 	state availability: 0 (true)
 	qosmarking enabled: yes mode: none
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 index 11
 	eflags=1002080<TXSTART,NOAUTOIPV6LL,ECN_ENABLE>
 	inet6 fe80::aae2:a7ca:ad8a:540%utun0 prefixlen 64 scopeid 0xb 
 	nd6 options=201<PERFORMNUD,DAD>
 	agent domain:ids501 type:clientchannel flags:0xc3 desc:"IDSNexusAgent ids501 : clientchannel"
 	state availability: 0 (true)
 	scheduler: FQ_CODEL 
 	qosmarking enabled: no mode: none
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380 index 12
 	eflags=1002080<TXSTART,NOAUTOIPV6LL,ECN_ENABLE>
 	inet6 fe80::a4b9:a2b2:95c:b086%utun1 prefixlen 64 scopeid 0xc 
 	inet6 fdb7:98e5:bc83:2490:a4b9:a2b2:95c:b086 prefixlen 64 
 	nd6 options=201<PERFORMNUD,DAD>
 	state availability: 0 (true)
 	scheduler: FQ_CODEL 
 	qosmarking enabled: no mode: none
Petes-MBP:~ Peter$
        jimpJ 1 Reply Last reply Reply Quote 1
        • jimpJ
          jimp Rebel Alliance Developer Netgate @peter_richardson
          last edited by

          @peter_richardson said in WAN interfaces fail to return after power outage:

          yeah that's the last few entries from it booting, then there's nothing else after that.

          Here's the output from ifconfig -v but according to www.diffchecker.com there's no difference in the output whether it's working properly or not:

          That appears to be from your Mac, not pfSense. Try that command on pfSense when it works and when it doesn't.

          Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

          Need help fast? Netgate Global Support!

          Do not Chat/PM for help!

          P 1 Reply Last reply Reply Quote 0
          • P
            peter_richardson @jimp
            last edited by

            @jimp sorry, that was a silly mistake! I'll test again later today and report back.

            1 Reply Last reply Reply Quote 1
            • P
              peter_richardson
              last edited by

              @jimp said in WAN interfaces fail to return after power outage:

              hat command on pfSense when it works and when it doesn't.

              Hey guys, sorry for the late reply, I have finally had a spare minute to do some testing. Please see attached.

              EDIT: I CAN'T REPLY BECAUSE I GET THIS ERROR:

              ERROR
              Post content was flagged as spam by Akismet.com

              1 Reply Last reply Reply Quote 1
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                What are you trying to post? The ifconfig output?

                It will probably allow you to post a screenshot of it if it's still blocking you.

                Steve

                1 Reply Last reply Reply Quote 0
                • P
                  peter_richardson
                  last edited by

                  Yes, 2 of then but that would make 4 images plus the other image, and then you can't copy and paste text for analysis. Can we please fix this issue? Why would it mark my post as spam when I am a registered user, replying to a thread that I created, from the same public ip as always? And why not also tell me why it has been marked as spam so I can try to fix whatever it's issue is?

                  1 Reply Last reply Reply Quote 2
                  • P
                    peter_richardson
                    last edited by

                    for now, click here to view my reply:
                    https://www.evernote.com/l/ADhKbADk7v9OEqpkJOKxMDlLcgZZPWWDJXs

                    1 Reply Last reply Reply Quote 2
                    • P
                      peter_richardson
                      last edited by

                      anyone?

                      1 Reply Last reply Reply Quote 2
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        I up-voted enough of your posts that you should not get hit by Akismet again.

                        Do you see anything logged showing it getting the 0.0.0.0 address? It looks like the WAN doesn't come back up because it sees that as a valid address. If something giving that to it you can exclude a particular DHCP server as a source.

                        Steve

                        1 Reply Last reply Reply Quote 1
                        • P
                          peter_richardson
                          last edited by

                          Thanks Stephen!

                          So you're saying that it appears that pfSense is giving the WWAN interface the address of 0.0.0.0?

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            No, more likely it's something upstream giving it that before the connection comes up. Cable modems do that with monotonous regularity. 🙄 But I'm not sure what sort of hand-off you have. I know NBN can be several different things.
                            If that is the case though you should see something logged in the DHCP logs as the dhclient pulls the bad address.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • P
                              peter_richardson
                              last edited by

                              I see. No, the WWAN isn't NBN, the WWAN is 4G with a Telstra SIM card, using a Netgear Nighthawk M1.

                              So changing the WWAN interface from DHCP to static with an IP address that is in the M1's usual DHCP range should fix this. IE: set the IP to 192.168.0.50 but alas, it just shows on the dashboard as "gateway down". So it looks like this isn't the issue. In fact, once I set the IP to static, it didn't work at all, which makes me wonder what is going on since previously, any changes to the WWAN connection would make the connection come back online, and giving it a static address shouldn't prevent it from working under normal conditions, so long as the address is within the M1's normal DHCP range. 😕

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Hmm, well the DHCP logs should still show if the bad address is coming from somewhere upstream. If it's coming from a different DHCP server you can block it as a source and the client will continue to look for other servers. That works well with cable modems that do this.
                                Anyway check the logs for 0.0.0.0 messages.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • P
                                  peter_richardson
                                  last edited by peter_richardson

                                  I can't see anything in the DHCP logs for 0.0.0.0 I even lengthened the log to 1,000 entries, which took me back to about 11am today, should I go back further?
                                  Here's what's in there, I can't make much sense of it, can you?
                                  what's the "fail" all about?

                                  Nov 16 13:20:13	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 1
Nov 16 13:20:14	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:20:16	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 3
Nov 16 13:20:19	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 5
Nov 16 13:20:24	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 13
Nov 16 13:20:37	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 14
Nov 16 13:20:51	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 12
Nov 16 13:21:03	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 8
Nov 16 13:21:11	dhclient	99656	No DHCPOFFERS received.
Nov 16 13:21:11	dhclient	99656	No working leases in persistent database - sleeping.
Nov 16 13:21:11	dhclient		FAIL
Nov 16 13:21:26	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 1
Nov 16 13:21:27	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 1
Nov 16 13:21:28	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:21:30	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:21:32	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 5
Nov 16 13:21:38	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 14
Nov 16 13:21:52	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 11
Nov 16 13:22:03	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 16
Nov 16 13:22:11	dhcpd		DHCPREQUEST for 10.20.63.134 from 80:5e:c0:07:7f:9c (W60B) via igb3
Nov 16 13:22:11	dhcpd		DHCPACK on 10.20.63.134 to 80:5e:c0:07:7f:9c (W60B) via igb3
Nov 16 13:22:19	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 8
Nov 16 13:22:27	dhclient	99656	No DHCPOFFERS received.
Nov 16 13:22:27	dhclient	99656	No working leases in persistent database - sleeping.
Nov 16 13:22:27	dhclient		FAIL
Nov 16 13:22:42	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 1
Nov 16 13:22:43	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:22:45	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 4
Nov 16 13:22:49	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 9
Nov 16 13:22:58	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 21
Nov 16 13:23:19	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 16
Nov 16 13:23:36	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 7
Nov 16 13:23:43	dhclient	99656	No DHCPOFFERS received.
Nov 16 13:23:43	dhclient	99656	No working leases in persistent database - sleeping.
Nov 16 13:23:43	dhclient		FAIL
Nov 16 13:23:58	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:24:00	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 5
Nov 16 13:24:05	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 8
Nov 16 13:24:13	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 16
Nov 16 13:24:29	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 19
Nov 16 13:24:48	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 11
Nov 16 13:24:59	dhclient	99656	No DHCPOFFERS received.
Nov 16 13:24:59	dhclient	99656	No working leases in persistent database - sleeping.
Nov 16 13:24:59	dhclient		FAIL
Nov 16 13:25:14	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 2
Nov 16 13:25:16	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 5
Nov 16 13:25:21	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 9
Nov 16 13:25:30	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 9
Nov 16 13:25:40	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 12
Nov 16 13:25:52	dhclient	99656	DHCPDISCOVER on igb1 to 255.255.255.255 port 67 interval 15
                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Hmm, disappointing. The fail simply indicates the dhcp client failed to get get a lease from a server after completing its sequence and starts again after a pause.

                                    Does the Nigthhawk log anything for this connection or is it entirely bridging?

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • P
                                      peter_richardson
                                      last edited by

                                      I will have a look but I'm not holding my breath for any decent logging in a Netgear piece of equipment. I don't think this is a Netgear problem though, it doesn't happen with any other device such as a laptop. You can restart the laptop and it gets an IP address just fine. It's only when pfSense is restarted that this happens. And it's not just isolated to the Netgear device, it also happens with the WAN connection - so both connections fail to come back when the router is restarted. If the power goes off or I need to reboot the router for any reason, I have to go into the router, disable the interfaces and then re-enable the interfaces for them to work again.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Had to re-read the thread as I'd assumed it was a powerfailure on the upstream devices the prevented it connecting. Not connecting to either WAN after rebooting pfSense is even more weird.

                                        Can you restore the connection by pulling the cable and reconnecting it? Or does it need logically disabled while remaining connected?

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • P
                                          peter_richardson
                                          last edited by

                                          Unplugging and replugging also works the same as disabling and re enabling the interface. It comes back online and gets correct ip address.

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            peter_richardson
                                            last edited by

                                            please help :-)

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.