VLAN troubles, trouble connecting from VLAN 10 to LAN, others work.

davidg1982

From proxmox (192.168.0.2) perspective, it cannot ping anything on the VLAN10 network (192.168.10.0/24), including the gateway (192.168.10.1). Anything on the VLAN10 Network cannot ping 192.168.0.2 (Proxmox), but it can ping the gateway (192.168.0.1). Proxmox and VLAN 10 network can ping VLAN 20, and VLAN 20 can ping LAN and VLAN 10.

I checked proxmox host. I've disabled the firewall. It still doesn't work. All other symptoms still occur.

stephenw10

Most likely the proxmox server has no route or a bad route to 192.168.10.X. Or it has a firewall running on it blocking access from that subnet.
Can you ping out from Proxmox to anything in VLAN10?

Steve

davidg1982

@stephenw10 I cannot ping anything from Promox to VLAN 10. I can ping from Proxmox to VLAN 20. Proxmox can ping the LAN gateway. How would I diagnose bad routes?

johnpoz

Look at its routes... It really should only have the default I would think.

When you do a traceroute does its actually send the traffic to pfsense... Or does it maybe think that network is local to it?

davidg1982

Proxmox Routes:

pve:~$ sudo route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.0.1     0.0.0.0         UG    0      0        0 vmbr1
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 vmbr1

Zabbix Routes:

zabbix ~# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.10.1    0.0.0.0         UG    0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0

webserver routes on VLAN20:

# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.20.1    0.0.0.0         UG    0      0        0 eth0
192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0

Proxmox traceroute to 192.168.10.4:

david@pve:~$ sudo traceroute 192.168.10.2
traceroute to 192.168.10.2 (192.168.10.2), 30 hops max, 60 byte packets
 1  192.168.0.1 (192.168.0.1)  0.312 ms  0.341 ms  0.472 ms
 2  * * *
 3  * * *
 4  * * *
 5  * * *
 6  * * *

Zabbix traceroute to 192.168.0.2

zabbix ~# traceroute 192.168.0.2     
traceroute to 192.168.0.2 (192.168.0.2), 30 hops max, 60 byte packets
 1  192.168.10.1 (192.168.10.1)  0.437 ms  0.455 ms  0.526 ms
 2  * * *
 3  * * *
 4  * * *
 5  * * *

web server on VLAN20 to 192.168.0.2

:~# traceroute 192.168.0.2
traceroute to 192.168.0.2 (192.168.0.2), 30 hops max, 60 byte packets
 1  192.168.20.1 (192.168.20.1)  0.396 ms  0.424 ms  0.458 ms
 2  192.168.0.2 (192.168.0.2)  1.305 ms  1.307 ms  1.327 ms

stephenw10

Hmm, looks OK.

I'd run packet captures on the interfaces in pfSense whist trying to ping between the hosts. See exactly what is arriving an leaving.

Steve

johnpoz

Yeah maybe your mask is wrong on the box your trying to ping... Your multiple vlans getting confusing..

Lets just deal with the vlan talking to the other vlan

You hit the right first hop and then nothing..

Ok then sniff on the other vlan or the client do you see the ping? Does the dest IP your trying to ping have the correct /24 mask?

davidg1982

Looks like all the machines have /24 operating.
Here is what the ICMP looks like from the LAN side with packet sniffing.

13:54:18.518924 52:5c:ff:1f:67:44 > 32:e8:8d:67:76:e5, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 25026, offset 0, flags [DF], proto ICMP (1), length 84)
    192.168.0.2 > 192.168.10.4: ICMP echo request, id 25888, seq 1, length 64

Does it come out the other side? Nope. Nothing comes out to VLAN10.

Same way in reverse.

johnpoz

So these are all vlan tagged on pfsense and just 1 vitrual nic em1.. Why would you not do the vlans in your vm hosting software..

Makes no sense that pfsense would get a packet and not send it somewhere..

davidg1982

Exactly. I don't understand why it wouldn't route it. Yep, here is my config on the proxmox. There has to be something I am missing.
Well..I am. Doing VLANs this way is recommended by Proxmox. Read up more here: link

auto lo
iface lo inet loopback

allow-ovs vmbr0

allow-vmbr0 eno1
iface eno1 inet manual
        ovs_type OVSPort
        ovs_bridge vmbr0

auto vmbr0
iface vmbr0 inet manual
        ovs_type OVSBridge
        ovs_ports eno1

auto vmbr1
iface vmbr1 inet static
        address  192.168.0.2
        netmask  255.255.255.0
        gateway  192.168.0.1
        ovs_type OVSBridge
        ovs_ports vlan10 vlan20 vlan30 vlan40

allow-vmbr1 vlan10
iface vlan10 inet manual
        ovs_type OVSIntPort
        ovs_bridge vmbr1
        ovs_options tag=10

allow-vmbr1 vlan20
iface vlan20 inet manual
        ovs_type OVSIntPort
        ovs_bridge vmbr1
        ovs_options tag=20

allow-vmbr1 vlan30
iface vlan30 inet manual
        ovs_type OVSIntPort
        ovs_bridge vmbr1
        ovs_options tag=30

allow-vmbr1 vlan40
iface vlan40 inet manual
        ovs_type OVSIntPort
        ovs_bridge vmbr1
        ovs_options tag=40

davidg1982

I should point out that I have a plex machine setup with a NAT for VLAN10. So, it's accessible from WAN.

davidg1982

PFSense Routes. Scrubbed of some public information.

IPv4 Routes
Destination		Gateway	Flags	Use	Mtu	Netif	Expire
default			WAN GATEWAY	UGS	1058841	1500	em0	
10.1.0.0/24		10.1.0.2	UGS	1746	1500	ovpns1	
10.1.0.1		link#11	UHS	0	16384	lo0	
10.1.0.2		link#11	UH	0	1500	ovpns1	
10.41.10.9		link#13	UH	3615	1500	ovpnc3	
10.41.10.10		link#13	UHS	0	16384	lo0	
10.72.10.5		link#12	UH	3632	1500	ovpnc2	
10.72.10.6		link#12	UHS	0	16384	lo0	
WAN IP/29		link#1	U	3640	1500	em0	
WAN ANOTHER IP		link#1	UHS	0	16384	lo0	
WAN ANOTHER IP		link#1	UHS	0	16384	lo0	
WAN ANOTHER IP 		link#1	UHS	0	16384	lo0	
127.0.0.1		link#4	UH	118	16384	lo0	
192.168.0.0/24		link#2	U	5068	1500	em1	
192.168.0.1		WAN GATEWAY	UGHS	0	1500	em0	
192.168.10.0/24		link#7	U	396258	1500	em1.10	
192.168.10.1		link#7	UHS	0	16384	lo0	
192.168.20.0/24		link#8	U	74842	1500	em1.20	
192.168.20.1		link#8	UHS	0	16384	lo0	
192.168.30.0/24		link#9	U	0	1500	em1.30	
192.168.30.1		link#9	UHS	0	16384	lo0	
192.168.40.0/24		link#10	U	3	1500	em1.40	
192.168.40.1		link#10	UHS	0	16384	lo0

stephenw10

Normally I would look for policy based routing here. You don't have a gateway set in any of the rules shown above but you could have floating rules or an interface group passing that traffic and sending it out the WAN.

You might also have an IPSec VPN grabbing that traffic.

Steve

davidg1982

Ah.......it wasn't DNS this time, but it was IPSEC. It was some pesky IPSEC that wasn't fully enabled, only enabled on one side.
A few months ago I was going to setup some IPSEC stuff but gave up on it' I guess I never disabled it. I went ahead and disabled my half-assed IPSEC and now it's working.
I want to thank everyone for their help. Appreciate it. This was a tough one for me.