Access internal webserver multiple subnet
-
Good morning,
I have a problem with my pfsense box, don't know how to debug it.I have:
1 WAN X.X.X.X
1 LAN 192.168.1.1/24
1 WIFI 172.16.10.1/24
1 VLAN 192.168.2.1/24I have a server inside VLAN net with 192.168.2.114 serving a webserver running on 80 port and a SSH running on 22 port
On LAN net I have a pc windows with 192.168.1.110 and I'm trying to access 192.168.2.114:80 and I can't do it. In the other side I can access on 192.168.2.114:22
I can't figure out what's the problem, I can't reach 192.168.2.114:80 with telnet....
Do you help me with some hint?
Thank you
-
@alex87alex post your firewall rules
-
My firewall rules:
-
@alex87alex nothing strange here
Can you ping between hosts?
How about local firewalls on hosts? -
I can ping 192.168.2.114 and firewall is disabled on linux host.
In addition to this, I have an access point on WIFI network on 172.16.10.2 ip. With the windows pc 192.168.1.110 I cannot connect to 172.16.10.2:80 on the tp-link admin panel, I can connect to this only with devices connected to WIFI on the same subnet (for example a mobile phone with ip 172.16.10.110)
The strange thing is I can connect to ssh server... It was better I couldnt at all....
-
@alex87alex In your firewall rules change the source to “any” for all of the default allow rules and see what happens.
-
Without do any change now I can access to 192.168.2.114:80, don't know why...
I rebooted the firewall like 3 times without see any difference. I'm afraid that at the next reboot I can't access anymore...
I didn't change anything between a restart to other. I can't explain this