Fresh install on older Intel D915GAG motherboard
-
I have a bunch of computers with the following specs:
Intel D915GAG motherboard
4GB PC-3200
Celeron 2.66GHz EMT64 Capable CPUpfSense 2.2 AMD64 installs just fine - no errors whatsoever during the process.
When I reboot and pfSense shows the boot options where I can select F1 pfSense or F6 PXE boot, the system seems to get stuck. What would normally be a spinning \ is stationary and nothing happens. I enabled verbose logging but it seems this problem occurs before logging starts.
Any ideas on what is causing the stuck condition?
Thanks.
++ Addition: If I use an SSD for the HDD, it works. If I use a traditional platter drive it gets stuck. Which is weird. Both drives are using the SATA interface.