PfSense 2.2 <-> AVM - Fritzbox (VPN Net2Net) ?
-
Is there anyone out there who had success with that Mission?
I tried several tutorials (but still only available for 2.1) but failed.
regards
-
i have successfully do that.
Do you have a special problem? -
Same problem here. Any config files or screen shots of the working configuration?
-
Config File of Fritzbox:
/*
- C:\Users\user\AppData\Roaming\AVM\FRITZ!Fernzugang\dyndns\fritzbox_fritzbox.cfg
- Mon Mar 02 17:06:02 2015
*/
vpncfg {
connections {
enabled = yes;
conn_type = conntype_lan;
name = "pfsense_vpn";
always_renew = no;
reject_not_encrypted = no;
dont_filter_netbios = yes;
localip = 0.0.0.0;
local_virtualip = 0.0.0.0;
remoteip = pfsense_ip;
remote_virtualip = 0.0.0.0;
localid {
fqdn = "dyndns or static ip";
}
remoteid {
ipaddr = static wan ip or dyndns;
}
mode = phase1_mode_idp;
phase1ss = "all/all/all";
keytype = connkeytype_pre_shared;
key = "presharedkey";
cert_do_server_auth = no;
use_nat_t = yes;
use_xauth = no;
use_cfgmode = no;
phase2localid {
ipnet {
ipaddr = 192.168.10.0;
mask = 255.255.255.0;
}
}
phase2remoteid {
ipnet {
ipaddr = 192.168.100.0;
mask = 255.255.255.0;
}
}
phase2ss = "esp-all-all/ah-none/comp-all/pfs";
accesslist = "permit ip any 192.168.100.0 255.255.255.0";
}
ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
"udp 0.0.0.0:4500 0.0.0.0:4500";
}// EOF
-
Phase 1 pfsense:
Phase 2 pfsense:
Finish.
Successfully tested with pfsense (version 2.2 & 2.2.1) and Fritzbox 7490, 7390 …
-
No success. Maybe it’s my old Fritzbox 7270. Get a new one (7490) next week or so and will give it a try.
-
With the new Fritzbox 7490 it works. Thanks!