Pfsense update really really broken for two years now.
-
pkg help
Child process pid=1022 terminated abnormally: Segmentation fault -
I would bet you have bad hardware somewhere. Check the RAM and the disk. Make sure you are running the latest BIOS of whatever device you're trying to install on.
-
Hardware is fine. (tested it throughly) before reinstalling.
Reinstalled and restored from backup.
Switched it to a little SSD in the process.
Golden. -
@n8lbv said in Pfsense update really really broken for two years now.:
Hardware is fine. (tested it throughly) before reinstalling.
Reinstalled and restored from backup.
Switched it to a little SSD in the process.
Golden.Yes, the Micro$oft way works well.
Except one has to be there physically to do it.
Sadly, makes pfsense no longer suitable for remote administration and therefore not suitable for anything at all. -
OK then. See you.
-
I do remote upgrades all the time and these kinds of errors are not normal or common.
You only see the complaints because that's how forums work. People rarely post that things worked well for them.
-
@jimp said in Pfsense update really really broken for two years now.:
I do remote upgrades all the time and these kinds of errors are not normal or common.
You only see the complaints because that's how forums work. People rarely post that things worked well for them.
Granted, that's true, complaints are posted and success stories are not.
However, I can assure you I'm not complaining just for the heck of it.
I'm way too busy to spend time on that.
But this trend with pfsense updates, last couple of years, is not hard to notice.
It saddens me because I like pfsense and up until around 2.2 it was a wonderful system with updates working reliably.
And even though I never got ipsec working - like they say "nothing is perfect" - I learned to live with it, and accepted it.
Pfsense said "User Openvpn" "it's better anyway", Ipsec is a work in progress.
But this week Openvpn setup was such a bust, that it was simply the straw that broke the camel's back.
When I notice a clear pattern of update failures and other deficiencies (Openvpn wizard not working), and know it's not my doing, and not my hardware, and see others having same issues and posting about it in the forums, then it's time to voice the concern. -
@shapeshifter910 said in Pfsense update really really broken for two years now.:
However, I can assure you I'm not complaining just for the heck of it.
I'm way too busy to spend time on that.Sure: https://forum.netgate.com/topic/138862/new-forum-software-and-old-accounts
-
@shapeshifter910
Yep, I've experienced a number of issues that are similar and did not voice them here.
I'm at the point now where there have been enough and I'm starting to mention them.
There was a time in 2015 where I GOT really busy.
Too busy to build PFSense systems on PC hardware for people so I recommended they buy a netgate box for around $515US at the time and a year of PFsense support.
This was a big mistake.
There are around 30 of these in the field per my 2015 recommendations.
Some I manage other s are managed by the customer.
At least 15 of them have failed in such a way that they required on site reinstallations or local console access to fix a failing bootup process.I am now stuck with a number of them out there that were sold to us by PFSense that are nanobsd (bought in 2014-2015)
and are "no longer supported" and will not update..The local system admins have given up on updating them and have asked me to either sell them something that
is up to date and supported or reinstall pfsense 2.4 on them and it is questionable if 2.4 will run on them and
if the CPUs are AES-NI capable which 2.5 is requiring now.Yes, PFSense used to be fabulous.
Now it is becoming incredibly annoying. -
@n8lbv
Yeah, exactly!
Gee, I didn't even know Netgate bought PfSense.
That explains everything.
Looking the website I see the first item is called Tnsr - Advanced open source-based Firewall, Router, and VPN platform with breakthrough enterprise-class performance, management, and service expansion flexibility.
Well here we go. Now we know what the devs have been working on.
Sigh, with such a confict of interest, pfsense' days are numbered.I've seen this before.
I started with Monowall when it was a one floppy distro.
Internet was in its infancy back then.
Then I jumped onto Smoothwall, and that was when I first found out how open source is being exploited for corporate profit.
Nothing wrong with making money - just don't pretend you're doing it for the "community".
Smoothwall got forked into IPCoP and I used to use IPCop for quite a while until it started to be neglected and got forked to IPFire, which is still thriving to this day.
Smoothwall is still around but it's a gosttown.
After IPCop I tried pfsense and been using it ever since.
Too bad it's days are numbers now. Hence the OPNSense.
Thanks for all the fish, pfsense. Been fun. Bye. -
You had 3 senior community members attempt to help you.
I'm seeing complaining, but nothing of substance from you for fixing your issues.
I'm locking this thread.