No WAN IP on new PfSense Box

[gemrock]

Hi Sir's,

I'm having trouble getting IP address in WAN side after installing PfSense on my new bought mini PC X30G-N2810. Here's my setup:

Modem huawei b315s-936 -> Mini PC X30G-N2810 -> Laptop (for testing)

Please help me.

[KOM]

Power cycle your modem and try again. It may be bonded to the MAC of your previous router.

[gemrock]

Already did that many times, sir, still not successful. How can i spoof the mac address of my old pfsense router? transfer to this new one

[KOM]

That's probably not your issue. What do your logs say when trying to fetch an address?

[gemrock]

No logs, just the wan have empty ip address. The lan have default 192.168.1.1

[netblues]

Use you laptop in place of pfsense wan and see if it works directly.
Is this dhcp? pppoe?

[gemrock]

@netblues Yes it works directly from modem to laptop. yes dhcp. here's my setup: MODEM------>PFSENSE WAN (no wan ip received), PFSENSE LAN------>LAPTOP

I'm using Mini PC X30G-N2810 as pfsense with 2 embeded realtek lan port!

[RonpfS]

Did you uncheck the Block private networks and loopback addresses in the Interfaces / WAN tab?

[netblues]

@gemrock said in No WAN IP on new PfSense Box:

@netblues Yes it works directly from modem to laptop. yes dhcp. here's my setup: MODEM------>PFSENSE WAN (no wan ip received), PFSENSE LAN------>LAPTOP

So no issue with mac address and need to spoof it too. Do a packet capture on your wan and see what is going on

[gemrock]

@ronpfs sir, I can ping the pfsense default lan too. 192.168.1.1 :(

[gemrock]

@netblues I can't capture packets, can't ping the 192.168.1.1 default pfsense ip

[KOM]

What do you mean "no logs"??? Status - System Logs - DHCP. All DHCP client messages are logged there. You're saying there is nothing at all?

Also, what do you mean by "I can't capture packets"??? Diagnostics - Packet Capture. The tools are there. Use them.