Pfsense blocking Playstation network on my ps4 and 3 and other phone apps
-
Without data, it's going to be very difficult to sort it out.
-
I no i am at work on nights at the moment thats why i put the modem router back in but i will have another go at it tomorrow and update
-
Hello i am back to it and still can't get it working i have noticed the gateways tab is showing this below
Gateways
WAN_PPPOE (default) 195.166.130.250 195.166.130.250 0ms 0ms 100% Offline Interface WAN_PPPOE Gateway
WAN_DHCP6 Pending Pending Pending Pending Interface WAN_DHCP6 Gateway -
This post is deleted! -
You might need to set that gateway to monitor a different IP if the gateway does not respond to ping. 8.8.8.8 is commonly used for that. That wouldn't be causing this problem though.
You might want to disable IPv6 entirely if you're not using it. Some devices try to use that first. Though given the state of networking in consoles I doubt that too.
Steve
-
Any idea what might be causing this as getting very frustrating now lol
-
i would be willing to let anyone remote connect using team viewer if anyone was willing to take a look for me
-
@stephenw10 i would be willing to let anyone remote connect using team viewer if anyone was willing to take a look for me
-
You haven't really said anything other than you have a problem. Nearly every time someone has an issue, it's because they misconfigured something. When getting info from the OP is like pulling teeth, I generally recommend starting over fresh, don't make any changes other than for the basic info to get up and running, and see if you have the issue then.
-
This is starting afresh with basic setup and i know it probably is something misconfigured and what else am i meant to say i dont no what wrong so not much else i can say thats why i asked if someone wouldnt mind team veiwering in id be so grateful
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
i would be willing to let anyone remote connect using team viewer if anyone was willing to take a look for me
I can help you via the forums, but if you want me to log onto your machines that will cost you. I have no probably volunteering support on the forums, but I work in the tech industry and get paid for hands-on engagements. If I didn't do this, I would have a never-ending line of people wanting help, and I would be broke.
We need to know a LOT more information about your setup to help. You really haven't given us much information other than "it doesn't work".
Simple things like:
What does your network layout look like?
Post screen shots of your pfSense settings.
What do your firewall logs show? -
This post is deleted! -
Here is screen shot of wan settings
-
Here is some of the firewall logs
-
here is some links to more of my settings
ps i am grateful for any help people givehttps://www.dropbox.com/s/ud7kvwsxqldbfij/20181228_185425.jpg?dl=0
https://www.dropbox.com/s/l4eh37jk8f91eju/20181228_185459.jpg?dl=0
https://www.dropbox.com/s/gunt15ymspdmtfj/20181228_185530.jpg?dl=0
https://www.dropbox.com/s/qzm0p67s42toh1j/20181228_185542.jpg?dl=0
https://www.dropbox.com/s/vcfn9mdn44rimyz/20181228_185555.jpg?dl=0
https://www.dropbox.com/s/k34kvwzi1fk728t/20181228_185650.jpg?dl=0
https://www.dropbox.com/s/9j6khi09hkhb6o8/20181228_185702.jpg?dl=0
https://www.dropbox.com/s/zci8ul4d4shxzje/20181228_185721.jpg?dl=0
https://www.dropbox.com/s/rj9p7xc8wa8o5ba/20181228_185740.jpg?dl=0 -
also i am using the netgear dm200 for my modem and the UniFi AP-AC-LR for my wireless
-
Based on your screen shots, this is not a default installation.
Yes, you'll need to put in your PPPOE settings, but why do you have 1:1 NAT mappings? Why is port 500 forwarding (and to what)?
Reset you install. Set up PPPOE. Test.
Your WAN does not support IPv6, so turn it off on your LAN too.
-
Nat mapping i setup up after the fact and the port 500 one is a default there after installing Pfsense
-
just done another clean install and still have the same problem so must be Pfsense not me just don't understand what the problem is makes no sense that all websites work its just the PS4 PS3 and xbox one as have now tested one of them same problem and phone apps i am to point where i might not even bother with this Rubbish os
-
So the only thing that doesn't work is "Playstation network"
Out of the box pfsense doesn't block anything outbound... Did you adjust your lan rules?