Pfsense blocking Playstation network on my ps4 and 3 and other phone apps
-
and 1:1 NAT sure and the F is not default - remove that!
So you have a clean default install - and what exactly is not working - what is the error you get when trying to access the playstation store or network? You didn't do any port fowards or turn on UPnP or install any packages or setup any vpn connections, etc.
-
i reinstalled pfsense this morning none of that is there now
-
So what exactly is not working now.. Your playstation says what when you try and access the playstation network? But its normal connectivity test passes.
We are not talking what nat it reports or setting up any forwards for games, etc.
-
This is what im getting
https://www.dropbox.com/s/q9dwthn8a6xzqrd/20181229_144442.jpg?dl=0
-
It says your login is failing. Everything else is okay.
Instead of using WiFi, what happens when you hardwire it into the network?
-
Ok from that looks like your connection is good, just having problem signing in... So what does the status it says you can check say?
Also your speeds are wow crappy!!! 17.5Kbps upload?? WTF?? 1.5mbps down - what do you expect to do with that sort of connection? You would prob have better speeds hot spotted over your phones cell connection..
Maybe your connection is just so saturated that you can not login... What are you speeds suppose to be? What speeds do you get with a wire?
-
when i use the router on its own it signs in every time with 30 down 19.5 up
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
when i use the router on its own it signs in every time with 30 down 19.5 up
Sounds more like a WiFi issue than a pfSense issue.
-
thats when i change over to my old router provided by plusnet works with wifi just fine then
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
thats when i change over to my old router provided by plusnet works with wifi just fine then
That's not what I asked you to do.
FWIW, I rarely use WiFi for connections like these. I hardware EVERYTHING. I am lucky that I live in a ranch-style house with an unfinished basement. I have wires running through the basement to every room that needs a connection. The few things that are not wired are usually the mobile devices. But everything else, including my PS4 is hardwired.
The devices you're having problems with, are they all using WiFi? Or are any of them hardwired?
-
I tried with ethernet on ps4 get the same problem
Here is ps4 with outbound nat rule in place
https://www.dropbox.com/s/dbxoqgvh774nzon/20181229_150259.jpg?dl=0
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
I tried with ethernet on ps4 get the same problem
Here is ps4 with outbound nat rule in place
https://www.dropbox.com/s/dbxoqgvh774nzon/20181229_150259.jpg?dl=0
Do the following:
1 - Reset pfSense to default. Do a basic configuration (no changes to rules, adding packages, etc.; just enter basic settings to get it on the network). Configure for your PPPoE. Do nothing else.
2 - Reboot all of your network gear from the ISPs drop to your PS4.
3 - Test the PS4.The error is a login error. Did you try re-entering your login credentials?
-
yes and like i say it works fine with the plusnet router
-
And what speeds do you get with this other router?
-
@davidserverguy2019 said in Pfsense blocking Playstation network on my ps4 and 3 and other phone apps:
yes and like i say it works fine with the plusnet router
Sounds very much like a WiFi issue, not a pfSense issue.
-
From the plusnet site looks like lowest broadband connection is 10mbps - your showing 1.5mbps - that is just HORRIBLE!!!
Pfsense doesn't block anything out of the box.. Nothing.. Pfsense doesn't care or even know if the traffic is wired or wireless... You have something wrong that is not pfsense related.
If pfsense broke playstation network connectivity... The forum would have a ddos from all the complaints ;)
But pfsense for sure can help you figure out what is going on... Do a sniff for your Playstations IP, set the packet limit to 0... Then sniff while you try and do your playstation test.. Then post up this pcap, and we can take a look see.
-
Setting for the netgear dm400
https://www.dropbox.com/s/6kbjroehc43q7c5/20181229_151752.jpg?dl=0
-
With the plusnet router in
https://www.dropbox.com/s/x05isxuvhnfupcz/20181229_152901.jpg?dl=0
-
Ok will do it tonight when the internet aint in as much use
-
@davidserverguy2019 Hey
You can show the output of the command ifconfig -m ?
You can do this in Diagnostics / Command Prompt
And show more Diagnostics /Packet Capture - interface Lan and ip of Playstation host
