Unbound DNS Resolver crashing randomly
-
But mine works.
And in response to the "default" install, I set explicit/specific in the page Services: DNS Resolver(General settings):Enabled True.
Network Interfaces : LAN's & Localhost
Outgoing Network Interfaces : All
All others choices are set False. -
I'm guessing it's not really crashed from the sounds of it (read: it's still running). This sounds like the issue in the "lolcats" thread doktornotor linked.
Go to Services>DNS Resolver, Advanced, make sure you have "Harden Glue" and "Harden DNSSEC data" both enabled.
-
@cmb:
I'm guessing it's not really crashed from the sounds of it (read: it's still running). This sounds like the issue in the "lolcats" thread doktornotor linked.
Go to Services>DNS Resolver, Advanced, make sure you have "Harden Glue" and "Harden DNSSEC data" both enabled.
Yes. This was the issue. This was the new symptom after enabling DNSSEC (without Harden Glue).
I posted this before I realized it was a symptom of the same issue when DNSSEC was turned on. -
I'm using version 2.2.2 of pfsense but the problem also occurred with version 2.2
Apparently when the unbound is on the machine after a few days of use begins to show great instability.
I lost the connection to the network interface lan in pfsense several times during the afternoon. After disabling the unbound problems ceased.
I initially uses the unbound to rewrite the domain of youtube.com, the process worked for about a week correctly, but stopped suddenly in one day. To solve the problem it was necessary to restart the service unbound and everything worked properly for a while. Referring again to happen after a few minutes.
The problem became serious when the next day was no longer possible to log in pfsense the web interface. I suspected that someone had managed to invade pfsense and damage files somehow.
I reinstalled the machine and everything was ok for about seven days, but this afternoon it started again.
I lost communication with the LAN interface of my pfsense, unplug and plug the network cable lan solve the problem, but soon returned to happen.
Finally I turned off the unbound and everything has stabilized.
I suspect the unbound is tipping the entire operating system somehow in pfsense. -
I am having the same issue. Unbound doesn't "crash" it just ramps up to 100% CPU and becomes unusable. Sometimes it goes away by itself, other times I have to restart the service to make it usable again.
Here is a link to the post I made: https://forum.pfsense.org/index.php?topic=93846.msg520894#msg520894
Interesting problem indeed….
-
@hda thank you for your post. I have Active Directory locally yet I still wanted to use DNS Resolver because all of my OpenVPN clients and DHCP reservations would all resolve. I had the hardest time... it would work for a day or so and then no longer resolve properly via nslookup or the host commands. I had to bounce the resolver service every time.
Seeing your post made me think that I should be more explicit and specifically pick the interface LAN & Localhost instead of All from the dropdown. I've now been up for 2-3 days with zero issues. Lesson learned that being explicit is not just for programming but for every part of life :)
Thanks again!
-
@JZng you are an all powerful necromancer, but in a good way at least.
-
@harvy66 I try brother :) didn't mean to wake the dead but what an important concept to pay forward. Leaving All in DNS Resolver > Network Interfaces made the pfSense resolver fail at random.
-
I'm getting similar issues. Looking in my DNS log i'm having the following show up:
Jan 7 11:03:22 unbound 70295:0 fatal error: Could not read config file: /unbound.conf. Maybe try unbound -dd, it stays on the commandline to see more errors, or unbound-checkconf Jan 7 11:03:22 unbound 70295:0 notice: Restart of unbound 1.8.1. Jan 7 11:03:22 unbound 70295:0 info: mesh has 0 recursion states (0 with reply, 0 detached), 0 waiting replies, 0 recursion replies sent, 0 replies dropped, 0 states jostled out Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 3: requestlist max 0 avg 0 exceeded 0 jostled 0 Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 3: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch, 0 rejected by ip ratelimiting Jan 7 11:03:22 unbound 70295:0 info: mesh has 0 recursion states (0 with reply, 0 detached), 0 waiting replies, 0 recursion replies sent, 0 replies dropped, 0 states jostled out Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 2: requestlist max 0 avg 0 exceeded 0 jostled 0 Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 2: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch, 0 rejected by ip ratelimiting Jan 7 11:03:22 unbound 70295:0 info: mesh has 0 recursion states (0 with reply, 0 detached), 0 waiting replies, 0 recursion replies sent, 0 replies dropped, 0 states jostled out Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 1: requestlist max 0 avg 0 exceeded 0 jostled 0 Jan 7 11:03:22 unbound 70295:0 info: server stats for thread 1: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch, 0 rejected by ip ratelimitinI've got the following settings in my advanced dns resolver:
and when I check the DNS resolver status page, I get the message that the resolver is stopped or disabled.
Any ideas how i can resolve this please? My wife is going mad! lol
-
Do what the logs files says.
edit :
IE : goto console mode, option 8 and enterunbound-checkconf
