Change IP

pama

Btw : Interesting issue : blaming the firewall when a "user" installed some random ware ...

I know, that's why I am fighting against the local IT.
Now I have access on a vm natted on the "new chinese firewall" and I can work also from Vsphere console, but I wouldn't like to start from scratch just only I need to change two IPs, it is very disappointing!

SteveITS

I'm not clear if the WAN and LAN are in the same subnet now, and you're trying to fix that? Because you wouldn't ever change them to the same subnet. If you're trying to swap them, perhaps change one to some other made up subnet temporarily...

WAN A
LAN B

WAN C
LAN B

WAN B
LAN A

pama

@teamits
et's take, for example
LAN net is 192.168.6.0/24
WAN net is 20.30.40.0/24 GW 20.30.40.254

My old IPs are
LAN 192.168.6.1
WAN 20.30.40.1 GW 20.30.40.254

I have changed first LAN address with
192.168.6.10

Then WAN address with
20.30.40.10 GW 20.30.40.254

The system is stuck. I can connect with a slow refresh to the interface but I cannot browse and/or update the system.

SteveITS

OK so the two interfaces are not in the same subnet.

I have no idea why you would have the trouble you describe, by making those changes. Are you sure neither of those IPs are already in use on other devices?

Have you tried changing just the LAN IP, and restarting?

pama

@teamits said in Change IP:

Have you tried changing just the LAN IP, and restarting?
The question is that the WAN IP is now used by another device, so I need to change it too

Grimson

Get actual console access (not SSH) and use option "2" to change the IPs and then reboot it for good measure.

pama

@grimson said in Change IP:

Get actual console access (not SSH) and use option "2" to change the IPs and then reboot it for good measure.

Already done...

SteveITS

@pama said in Change IP:

the WAN IP is now used by another device

I was just trying to find out at what step you lose access.
You should not be losing access.
If the current WAN IP is in use by another device I would expect both of those to have trouble and would be surprised if you could connect out from the pfSense to the Internet before changing WAN IPs.
I was trying to suggest the new WAN IP is also in use by another device. That would at least be consistent with your symptoms.

pama

@teamits said in Change IP:

@pama said in Change IP:

the WAN IP is now used by another device

I was just trying to find out at what step you lose access.
You should not be losing access.
If the current WAN IP is in use by another device I would expect both of those to have trouble and would be surprised if you could connect out from the pfSense to the Internet before changing WAN IPs.
I was trying to suggest the new WAN IP is also in use by another device. That would at least be consistent with your symptoms.

Please read from the top...

The local IT has disconnected pfsense nics from vsphere adn used its ips for the new device.
the new device is working without any problem, as pfsense before.
now I want to reconnect pfsense with UNUSED IPS (please, huh? I work in IT from 20 years)

SteveITS

@pama said in Change IP:

The local IT has disconnected pfsense nics from vsphere

OK but then the symptom of slow web GUI and inability to access updates is to be expected. The slow GUI happens because DNS isn't working and each try must time out on all DNS servers before the GUI moves on.

I was assuming the NICs were being reconnected after the IP change.

Not sure where to go from here. The only issue I've had with changing IPs is the rebinding check not allowing the new LAN IP but I think that bug was fixed a while ago.

SteveITS

Could there be anything in VMWare that is blocking the new IPs? I haven't used VMWare much, but vaguely recall some issues on our Virtuozzo cluster with ARP tables on the physical host.

pama

@teamits said in Change IP:

@pama said in Change IP:

The local IT has disconnected pfsense nics from vsphere

OK but then the symptom of slow web GUI and inability to access updates is to be expected. The slow GUI happens because DNS isn't working and each try must time out on all DNS servers before the GUI moves on.

I was assuming the NICs were being reconnected after the IP change.

Not sure where to go from here. The only issue I've had with changing IPs is the rebinding check not allowing the new LAN IP but I think that bug was fixed a while ago.

pfsense can query the dns without any problem...